Signode TABLE-TYER Operation, Parts And Safety Manual page 14

12/14/10
STRAP TENSION
If R4 (strap tension
adjustment) is on MAX
position make sure that A is
turned clockwise until the
strap is not sliding between
rollers B and C.
Reverse action to achieve
lower strap tension.
MAINTENANCE AND LUBRICATION
To ensure that the semi-automatic strapping machine is always ready for proper and reliable
operation keep to regular and attentive
maintenance. Keep the machine clean
and take care particularly of the strap
guides. All small particles of loose
strap should always be removed from
all parts of the machine. In addition to
the strap guides, the strap feed devices
of the unit, the top of the dies and the
feed devices on the strap magazine
have to be blown free of any dust at
least once per week. The dies on the
unit have to be lightly lubricated
weekly.
Lubricate the marked points weekly.
Use only resin-free brand name oil for
lubrication. All other assemblies are
maintenance free. The strap guides
and the sealing unit have to be kept
clean! Do not oil feedrollers.
14