Advertisement
Quick Links
TH-114 STRAP TENSIONER
.
TOOL SPECIFICATIONS
STRAP TYPE
WIDTH
THICKNESS
Apex, Magnus
1-1/4"(32.0mm)
.029"(0.73mm) to .035"(0.89mm)
IMPORTANT - DO NOT DESTROY THIS MANUAL. It is the customer's responsibility to have all operators
and service personnel read and understand this manual. Contact your local Signode representative for
additional copies of this manual.
© Copyright 2003 Signode 286184 Rev. 5/2003
Advertisement
Related Manuals for Signode TH-114
Summary of Contents for Signode TH-114
- Page 1 .029"(0.73mm) to .035"(0.89mm) IMPORTANT - DO NOT DESTROY THIS MANUAL. It is the customer's responsibility to have all operators and service personnel read and understand this manual. Contact your local Signode representative for additional copies of this manual. © Copyright 2003 Signode 286184 Rev. 5/2003...
- Page 2 Several combinations of strap, seals and tools can be used which could result in the following: with this tensioner. Use the correct Signode products for your application. If you need help contact your Signode A sudden loss of balance causing you to fall.
- Page 3 OPERATING INSTRUCTIONS Snap a seal on the straps directly in front of the tool, making sure that the seal covers both straps. Wear safety glasses which conform to ANSI Standard Z87.1 or EN 166. Always position yourself to one side of the strap while tensioning and sealing.
Need help?
Do you have a question about the TH-114 and is the answer not in the manual?
Questions and answers