Fiat 500X Owner's Handbook Manual page 28

Turning the ignition device to the MAR
position will deactivate the function.
MAIN BEAM HEADLIGHTS
To activate the fixed main beam
headlights, with the ignition device in
MAR, push left lever (A) fig. 29 towards
the dashboard. The light switch should
be turned to
AUTO
beam headlights on, or it should be
turned to position
With main beam headlights on, the
warning light on the instrument panel
will come on at the same time.
Flashing the headlights
Pull the lever (A) fig. 29 towards you;
when released it returns automatically
to the stable, central position.
With main beam headlights on, the
warning light on the instrument panel
will come on at the same time.
29
26
Automatic main beam headlights
(where provided)
In order not to disturb other road
users, the main beam headlights
are automatically turned off when
approaching oncoming vehicles or
when following a vehicle travelling in the
same direction.
with the dipped
This function can be set using the
display Menu (see the instructions in
.
the "Display" paragraph, "Knowing the
instrument panel" chapter); to activate
it, turn the light switch ring to
The function is activated by pushing
the stalk toward the dashboard (stable
position); the
on in the instrument panel. The
warning light will also come on in the
instrument panel with main beam
headlights on. If the car is stopped
with the setting just described, when
it is restarted the automatic main
beam headlight function will have to
be set again: return the lever to the
central position and push it towards the
instrument panel as before.
When the speed is over 40 km/h and
the function is active, returning the
lever to the stable central position
deactivates the function and switches
the main beam headlights off.
F1B0037C
When the speed is lower than 15 km/h
and the function is active, the system
automatically switches main beam
headlights off.
If the lever is pulled back to the central
stable position and then pushed
towards the instrument panel again
and left there, this is interpreted as a
request for permanent main beam
headlights: the light illuminates on the
instrument panel and the main beam
headlights remain on until the car's
. speed rises back above 40 km/h.
AUTO
Above this speed, the function is
automatically reactivated and the
light illuminates again on the instrument
warning light comes
panel.
To deactivate this function, rotate the
light switch ring nut to the
DIRECTION INDICATORS
Bring the left stalk A fig. 29 to the
(stable) position:
upwards : activates the right direction
indicator;
downwards : activates the left direction
indicator.
The
will flash on the instrument panel.
The direction indicators switch off
automatically when the steering wheel
is straightened or when the daytime
running lights (DRL) are switched on.
position.
or warning light respectively