Fiat 500X 2020 Owner's Manual
  1. Manuals
  2. Brands
  3. Fiat Manuals
  4. Automobile
  5. 500X 2020
  6. Owner's manual

Fiat 500X 2020 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

5 0 0X OWN E R 'S M AN UAL
2 0 2 0 F I AT
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 500X 2020 and is the answer not in the manual?

Questions and answers

Related Manuals for Fiat 500X 2020

Summary of Contents for Fiat 500X 2020

  • Page 1 5 0 0X OWN E R ’S M AN UAL 2 0 2 0 F I AT ®...
  • Page 2 This Owner’s Manual illustrates and describes the operation of features and equipment that are either standard or optional on this vehicle. This manual may also include a description of features and equipment that are no longer available or were not ordered on this vehicle. Please disregard any features and equipment described in this manual that are not on this vehicle.

  • Page 3: Table Of Contents

    TABLE OF CONTENTS INTRODUCTION .......................... 7 GETTING TO KNOW YOUR VEHICLE ................9 GETTING TO KNOW YOUR INSTRUMENT PANEL .............71 SAFETY ............................90 STARTING AND OPERATING ................... 142 IN CASE OF EMERGENCY ....................199 SERVICING AND MAINTENANCE ................... 231 TECHNICAL SPECIFICATIONS ..................274 MULTIMEDIA ..........................
  • Page 4 INTRODUCTION VEHICLE SECURITY ALARM — IF EQUIPPED ..18 EXTERIOR LIGHTS........... 35 To Arm The System ........... 18 Headlights ............35 HOW TO USE THIS MANUAL ........7 To Disarm The System ........18 Daytime Running Lights (DRLs) — Essential Information ........... 7 Disabling .............
  • Page 5 SUNROOF — IF EQUIPPED........60 INSTRUMENT CLUSTER DISPLAY ......72 OCCUPANT RESTRAINT SYSTEMS .....108 Opening The Sunroof.......... 60 Instrument Cluster Display Control Buttons..73 Occupant Restraint Systems......108 Closing The Sunroof ........... 61 Engine Oil Change Reset ........73 Important Safety Precautions ......108 Wind Buffeting ...........
  • Page 6 AUTOMATIC TRANSMISSION — IF EQUIPPED ..148 ADAPTIVE CRUISE CONTROL (ACC) — LANESENSE — IF EQUIPPED .......182 Gear Selector ............149 IF EQUIPPED............160 LaneSense Operation ........182 Gear Ranges .............150 Turning LaneSense On Or Off......182 Adaptive Cruise Control (ACC) Operation..161 Transmission Limp Home Mode......153 LaneSense Warning Message......
  • Page 7 IN CASE OF EMERGENCY FREEING A STUCK VEHICLE ....... 227 RAISING THE VEHICLE..........252 TOWING A DISABLED VEHICLE ......228 TIRES ..............252 HAZARD WARNING FLASHERS ......199 All Wheel Drive (AWD) Models......228 Tire Safety Information ........252 BULB REPLACEMENT ...........199 Tow Eye Usage — If Equipped ......229 Tires —...
  • Page 8 CONSUMER ASSISTANCE WHEEL AND TIRE TORQUE SPECIFICATIONS..275 UCONNECT 4/4 NAV WITH 7-INCH DISPLAY..297 Torque Specifications........275 Introduction ............297 SUGGESTIONS FOR OBTAINING SERVICE FUEL REQUIREMENTS .........275 Radio Mode ............298 FOR YOUR VEHICLE ..........338 Media Mode............306 1.3L Turbo Engine ..........275 Prepare For The Appointment ......338 Phone Mode .............314 Reformulated Gasoline ........276 Prepare A List ...........

  • Page 9: Introduction

    INTRODUCTION HOW TO USE THIS MANUAL Dear Customer, This Owner's Manual describes all versions of this vehicle. Options and equipment dedicated Congratulations on selecting your new vehicle. Essential Information to specific markets or versions are not expressly Be assured that it represents precision work- indicated in the text.

  • Page 10: Rollover Warning

    INTRODUCTION ROLLOVER WARNING WARNINGS AND CAUTIONS Utility vehicles have a significantly higher roll- This Owner’s Manual contains WARNINGS over rate than other types of vehicles. This against operating procedures that could result vehicle has a higher ground clearance and a in a collision, bodily injury and/or death.

  • Page 11: Getting To Know Your Vehicle

    GETTING TO KNOW YOUR VEHICLE KEYS Key Fobs Key Fob With Remote Control The key fob with Remote Control contains a Remote Keyless Entry feature. The Remote Keyless Entry system allows you to lock or unlock the doors and liftgate or activate the Panic Alarm from distances up to approximately 66 ft (20 m) using a handheld key fob.
  • Page 12 GETTING TO KNOW YOUR VEHICLE 1st Push Of Key Fob Unlock Button Vehicles Equipped With Keyless Enter-N-Go — To Unlock The Doors And Liftgate Passive Entry Push and release the unlock button on the key This feature lets you program the system to fob once to unlock the driver's door or twice unlock either the driver's door or all doors on If one or more doors are open, or the liftgate is...
  • Page 13 GETTING TO KNOW YOUR VEHICLE 1. Remove the emergency key by sliding the mechanical latch on the back of the key fob sideways with your thumb and pull the emergency key out with your other hand. Emergency Key Removal Key Fob Battery Replacement 3.

  • Page 14: Ignition Switch

    GETTING TO KNOW YOUR VEHICLE La operación de este equipo está sujeta a las Request For Additional Key Fobs General Information siguientes dos condiciones: The following regulatory statement applies to all NOTE: Radio Frequency (RF) devices equipped in this Only key fobs that are programmed to the vehicle 1.

  • Page 15: Remote Starting System - If Equipped

    GETTING TO KNOW YOUR VEHICLE method can be used to operate the ignition WARNING! (Continued) switch. Put the nose side (side opposite of the Driving position.  emergency key) of the key fob against the START/ Do not leave children or animals inside ...

  • Page 16: How To Use Remote Start

    GETTING TO KNOW YOUR VEHICLE NOTE: With remote start, the engine will only run for  WARNING! 15 minutes (timeout) unless the ignition key is With remote start, the engine will only run for  placed in the ON/RUN position. Do not start or run an engine in a closed ...

  • Page 17: To Enter Remote Start Mode

    GETTING TO KNOW YOUR VEHICLE Remote Start Cancelled — Time Expired To Exit Remote Start Mode Without Driving Remote Start Comfort Systems — If  The Vehicle Equipped Remote Start Disabled — Start Vehicle To Reset  Push and release the remote start button one When Remote Start is activated, the heated The message will stay active until the ignition is time or allow the engine to run for the entire...

  • Page 18: General Information

    GETTING TO KNOW YOUR VEHICLE General Information La operación de este equipo está sujeta a las operate the vehicle. The system will shut the siguientes dos condiciones: engine off in two seconds if an invalid key fob is The following regulatory statement applies to all used to start the engine.

  • Page 19: Key Programming

    GETTING TO KNOW YOUR VEHICLE All of the key fobs provided with your new NOTE: Le présent appareil est conforme aux CNR vehicle have been programmed to the vehicle Duplication of key fobs may be performed at an d`Innovation, Science and Economic Develop- electronics.

  • Page 20: Vehicle Security Alarm - If Equipped

    GETTING TO KNOW YOUR VEHICLE VEHICLE SECURITY ALARM — IF EQUIPPED 2. Perform one of the following methods to NOTE: lock the vehicle: The driver's door key cylinder and the liftgate  The vehicle security alarm monitors the vehicle Push the lock button on the interior ...

  • Page 21: Disabling

    GETTING TO KNOW YOUR VEHICLE Disabling WARNING! (Continued) To completely disable the alarm (e.g. in the case Allowing children to be in a vehicle unat-  of long inactivity of the car), lock the doors by tended is dangerous for a number of turning the emergency key in the exterior door reasons.

  • Page 22: Central Lock/Unlock

    GETTING TO KNOW YOUR VEHICLE Central Lock/Unlock NOTE: The key fob may not be detected by the vehicle  Passive Entry system if it is located next to a If all of the doors are closed properly, the door A power door lock switch is located on each of locks will lock automatically when the vehicle's mobile phone, laptop, or other electronic the front door trim panels.
  • Page 23 GETTING TO KNOW YOUR VEHICLE NOTE: Do NOT grab the door handle when pushing the NOTE: If “Unlock All Doors 1st Press” is programmed, all door handle lock button. This could unlock the After pushing the door handle button, you must ...
  • Page 24 GETTING TO KNOW YOUR VEHICLE A lock request is made by the Passive Entry Emergency Unlocking Driver Door NOTE:  door handle while a door is ajar. The Emergency Key can be inserted into the door If the Remote Keyless Entry key fob battery is lock cylinder in either direction.
  • Page 25 GETTING TO KNOW YOUR VEHICLE NOTE: WARNING! (Continued) If “Unlock All Doors 1st Press” is programmed in the instrument cluster display, if equipped, the Do not leave children or animals inside  parked vehicles in hot weather. Interior heat liftgate will unlock along with the vehicle doors. If build-up may cause them to be severely "Unlock Driver Door 1st Press"...

  • Page 26: Child Locks

    GETTING TO KNOW YOUR VEHICLE 2. This device must accept any interference Child Locks NOTE: received, including interference that may To provide a safer environment for small chil- When the Child-Protection Door Lock system is  cause undesired operation. dren riding in the rear seats, the rear doors are engaged, the door can only be opened by using Le présent appareil est conforme aux CNR equipped with a Child-Protection Door Lock...

  • Page 27: Seats

    GETTING TO KNOW YOUR VEHICLE SEATS WARNING! (Continued) Seats are a part of the Occupant Restraint Do not ride with the seatback reclined so that  System of the vehicle. the shoulder belt is no longer resting against your chest. In a collision you could slide under WARNING! the seat belt and be seriously or even fatally injured.

  • Page 28: Manual Adjustment (Rear Seats)

    GETTING TO KNOW YOUR VEHICLE Manual Adjustment (Rear Seats) You may experience deformation in the seat  cushion from the seat belt buckles if the seats WARNING! are left folded for an extended period of time. This is normal and by simply opening the seats Do not pile luggage or cargo higher than the to the open position, over time the seat top of the seatback.
  • Page 29 GETTING TO KNOW YOUR VEHICLE Partial Enlargement Of Cargo Area Cargo Area Enlargement Seatback Repositioning Enlargement of the left side of the cargo area Folding both sides of the rear seat provides NOTE: allows you to carry a single passenger on the additional storage in the rear cargo area.

  • Page 30: Power Adjustment Front Seats - If Equipped

    GETTING TO KNOW YOUR VEHICLE Tilt Adjustment WARNING! The angle of the seat cushion can be adjusted Be certain that the seatback is securely up or down. Pull upward or push downward on locked into position. If the seatback is not the front of the seat switch, the front of the seat securely locked into position the seat will not cushion will move in the direction of the switch.

  • Page 31: Heated Seats - If Equipped

    GETTING TO KNOW YOUR VEHICLE HEAD RESTRAINTS Heated Seats — If Equipped Auto On Comfort — If Equipped If the external temperature is below 40°F The heated seat switches are located on the Head restraints are designed to reduce the risk (4.4°C) at each start-up of the vehicle the instrument panel.

  • Page 32: Front Adjustment

    GETTING TO KNOW YOUR VEHICLE Front Adjustment Rear Adjustment Front Removal Your vehicle is equipped with driver and Your vehicle is equipped with two outboard To remove the head restraint recline the backrest of passenger head restraints. head restraints and one center head restraint the seat to avoid interference with the roof.

  • Page 33: Rear Removal

    GETTING TO KNOW YOUR VEHICLE STEERING WHEEL Rear Removal wheel upward or downward as desired. To lengthen or shorten the steering column, pull To remove the head restraint, raise it as far as it Tilt/Telescoping Steering Column the steering wheel outward or push it inward as can go then push the release button and adjust- desired.

  • Page 34: Mirrors

    GETTING TO KNOW YOUR VEHICLE MIRRORS wheel is already warm. The heated steering Electrochromic Mirror — If Equipped wheel control button is located on the center of This mirror automatically adjusts for headlight Inside Day/Night Mirror the instrument panel below the climate glare from vehicles behind you.

  • Page 35: Outside Mirrors

    GETTING TO KNOW YOUR VEHICLE Outside Mirrors NOTE: Folding Mirror To receive maximum benefit, adjust the outside The exterior mirrors are hinged to allow the To adjust the power mirrors, the ignition must  mirror(s) to center on the adjacent lane of traffic mirror to pivot forward or rearward to help avoid be in the ON/RUN position.

  • Page 36: Power Folding Mirrors - If Equipped

    GETTING TO KNOW YOUR VEHICLE Power Folding Mirrors — If Equipped To fold the outside mirrors, push the power Automatic Power Folding Mirrors folding mirror switch. Push the switch a second When the Automatic Fold Mirrors feature is If equipped, the outside mirrors can be folded time to unfold the mirrors to the driving position.

  • Page 37: Exterior Lights

    GETTING TO KNOW YOUR VEHICLE EXTERIOR LIGHTS Daytime Running Lights (DRLs) — If NOTE: The headlights must be on for the high beams to Equipped Headlights activate. The Daytime Running Lights (DRLs), if enabled The headlight switch is located on the left side by the Uconnect settings, will turn on when the Flash-To-Pass of the instrument panel.

  • Page 38: Parking Lights

    GETTING TO KNOW YOUR VEHICLE Automatic Headlights The time delay of the headlights is program- Front Fog Lights — If Equipped mable between 0, 30, 60 and 90 seconds. Turn the headlight switch to the AUTO position. The front fog light switch is built into Refer to “Uconnect Settings”...

  • Page 39: Turn Signals

    GETTING TO KNOW YOUR VEHICLE INTERIOR LIGHTS NOTE: Lane Change Assist Tap the lever up or down once, without moving The fog lights will operate with the low beam  Front Courtesy Light beyond the detent, and the turn signal (left or headlights or parking lights on.
  • Page 40 GETTING TO KNOW YOUR VEHICLE NOTE: NOTE: The dome light timing is disabled when the The timing stops once the ignition is placed in the doors are locked. Before exiting the vehicle, make sure that the  ON/RUN position. interior lights are turned off. This will prevent Rear Dome Light —...
  • Page 41 GETTING TO KNOW YOUR VEHICLE Illuminated Vanity Mirrors — If Equipped With the parking lights or headlights on, rotate Vehicles With Retractable Roof the instrument panel dimmer control upward or An illuminated vanity mirror is located on each For vehicles equipped with a retractable roof, downward to increase or decrease the bright- sun visor.

  • Page 42: Cargo Area Lights

    GETTING TO KNOW YOUR VEHICLE WIPERS AND WASHERS Cargo Area Lights Windshield Wiper Operation An interior light is located on the left side panel Rotate the windshield wiper knob to one of the Front Wiper Operation first two detent positions for intermittent in the cargo area.

  • Page 43: Rain Sensor - If Equipped

    GETTING TO KNOW YOUR VEHICLE Mist Use of Rain-X or products containing wax or sili-  cone may reduce Rain Sensing performance. Use this feature when weather conditions make occasional usage of the wipers necessary. Push The Rain Sensing feature can be turned on and ...

  • Page 44: Rear Window Wiper/Washer

    GETTING TO KNOW YOUR VEHICLE Remote Start Mode Inhibit — On vehicles Rear Window Wiper/Washer If the lever is pushed while the wiper is in the off  equipped with Remote Starting system, Rain position, the wiper will operate for several wipe The rear wiper/washer controls are located on Sensing wipers are not operational when the cycles, then turn off.

  • Page 45: Windshield Wiper De-Icer - If Equipped

    GETTING TO KNOW YOUR VEHICLE CLIMATE CONTROLS Windshield Wiper De-Icer — If Equipped CAUTION! Your vehicle may be equipped with a Windshield The Climate Control system allows you to regu- Failure to follow these cautions can cause Wiper De-Icer feature that may be activated late the temperature, air flow, and direction of air damage to the heating elements: under the following conditions:...

  • Page 46: Manual Climate Controls Overview

    GETTING TO KNOW YOUR VEHICLE Manual Climate Controls Overview Center Air Outlets Right Side Air Outlets 1 — Air Flow Outlet Adjustment 1 — Fixed Air Outlet Manual Climate Controls 2 — Adjustable Air Outlet 2 — Adjustable Air Outlet 3 —...
  • Page 47 GETTING TO KNOW YOUR VEHICLE Manual Climate Control Descriptions Icon Description MAX A/C Setting Set the temperature control knob to the MAX A/C setting to change the current setting to the coldest output of air. Moving the temperature control knob away from the MAX A/C setting causes the MAX A/C operation to exit. A/C Button Push the A/C button to engage the Air Conditioning (A/C).
  • Page 48 GETTING TO KNOW YOUR VEHICLE Icon Description Temperature Control Temperature Control regulates the temperature of the air forced through the climate system. The temperature increases as you turn the knob clockwise. The temperature decreases as you turn the temperature control knob counterclockwise. Blower Control Blower Control regulates the amount of air forced through the climate system.
  • Page 49 GETTING TO KNOW YOUR VEHICLE Icon Description Floor Mode Floor Mode Air comes from the floor outlets. A slight amount of air is directed through the defrost and side window demister outlets. Mix Mode Mix Mode Air comes from the floor, defrost, and side window demister outlets. This setting works best in cold or snowy conditions that require extra heat to the windshield.

  • Page 50: Automatic Climate Control Overview

    GETTING TO KNOW YOUR VEHICLE Automatic Climate Control Overview Automatic Climate Controls Automatic Climate Control Descriptions Icon Description MAX A/C Setting MAX A/C sets the system for maximum cooling performance. Rotate the driver temperature control adjust knob counterclockwise for MAX A/C. Both driver and passenger temperature displays will show MAX A/C LO. In MAX A/C, the blower speed and mode position can be adjusted to desired user settings.
  • Page 51 GETTING TO KNOW YOUR VEHICLE Icon Description SYNC Button Push the Sync button to toggle the Sync feature on/off. The Sync indicator illuminates when Sync is on. Sync synchronizes the passenger temperature setting with the driver temperature setting. Changing the passenger temperature setting while in Sync mode will automatically exit this feature and return to the separate management of air temperatures in the two zones.
  • Page 52 GETTING TO KNOW YOUR VEHICLE Icon Description MAX Defrost Button Push the MAX Defrost button to change the current airflow setting to Defrost mode. The MAX Defrost indicator illuminates when MAX Defrost is on. Performing this function will cause the automatic climate controls to change to manual mode.
  • Page 53 GETTING TO KNOW YOUR VEHICLE Icon Description Mode Control Buttons Select Mode by pressing one of the Mode buttons to change the airflow distribution mode. The airflow distribution mode can be adjusted so air comes from the instrument panel outlets, floor outlets, defrost outlets and demist outlets. The Mode settings are as follows: Front Defrost Mode Front Defrost Mode...
  • Page 54 GETTING TO KNOW YOUR VEHICLE Icon Description Bi-Level Mode Bi-Level Mode Bi-Level Mode is obtained by pressing both the Panel Mode button and the Floor Mode button, activating them both. Air comes from the instrument panel outlets and floor outlets. A slight amount of air is directed through the defrost and side window demister outlets.
  • Page 55 GETTING TO KNOW YOUR VEHICLE Icon Description Driver Temperature Knob Provides the driver with independent temperature control. Rotate the adjustment knob to set desired temperature shown in the Temperature Display. Rotate fully counterclockwise for maximum A/C (LO). The set temperature is shown on the display.

  • Page 56: Operating Tips

    GETTING TO KNOW YOUR VEHICLE To provide you with maximum comfort in the Automatic Temperature Control (ATC) Winter Operation automatic mode, during cold start-ups, the To ensure the best possible heater and Automatic Operation blower fan will remain on low until the engine defroster performance, make sure the engine warms up.
  • Page 57 GETTING TO KNOW YOUR VEHICLE Cabin Air Filter Air Recirculation CAUTION! The climate control system filters out dust and Push and release the Air Recirculation button so Failure to follow these cautions can cause pollen from the air. Contact an authorized that the LED is on, to enter recirculation mode.
  • Page 58 GETTING TO KNOW YOUR VEHICLE NOTE: the A/C control button, adjusting the fan speed NOTE: The system uses R-1234yf (refrigerant) which and turning the heated rear window off. With the compressor off, air cannot be intro- does not pollute the environment in the event of duced to the passenger compartment with a When the Recirculation Control or AUTO buttons accidental leakage.

  • Page 59: Windows

    GETTING TO KNOW YOUR VEHICLE WINDOWS Max Defrost  CONTROL WEATHER Blower Increase SETTINGS  Driver's Door Controls Warm Weather Turn on and set AUTO  The power window switches are located on the the mode control to driver’s door panel. The driver’s door power To restart the Climate Control system in fully position.
  • Page 60 GETTING TO KNOW YOUR VEHICLE NOTE: Auto-Down Feature — If Equipped Auto-Up Feature With Auto-Reverse Protection The power window switches will remain active for — If Equipped up to three minutes after the ignition is placed in the OFF position. Opening either front door will cancel this feature.
  • Page 61 GETTING TO KNOW YOUR VEHICLE NOTE: Window Lockout Switch Reset Auto-Up Should the Auto-Up feature be interrupted and If the window runs into any obstacle during  stop working, the feature will need to be reset. auto-closure, it will reverse direction and then The following procedure will reset the Auto-Up go back down.

  • Page 62: Sunroof - If Equipped

    GETTING TO KNOW YOUR VEHICLE Wind Buffeting WARNING! (Continued) Wind buffeting can be described as the percep- In a collision, there is greater risk of being  tion of pressure on the ears or a helicopter-type thrown from a vehicle with an open sunroof. sound in the ears.

  • Page 63: Closing The Sunroof

    GETTING TO KNOW YOUR VEHICLE Closing The Sunroof Sun Shade To close the front panel completely, pull the The two sun shades are manually operated and sunroof switch from the open position. The can be adjusted in any position. sunroof can be stopped in any position by Anti Pinch Protect Feature pulling the sunroof switch a second time while it This feature will detect an obstruction in the...

  • Page 64: Power Sunroof Relearn Procedure

    GETTING TO KNOW YOUR VEHICLE HOOD Power Sunroof Relearn Procedure As a result of any abnormal behavior of the roof Opening or as a result of an emergency operation, and The hood release lever (to open the primary you must relearn the automatic operation of the latch) and safety latch (to open the secondary sunroof.

  • Page 65: Closing

    GETTING TO KNOW YOUR VEHICLE LIFTGATE NOTE: WARNING! Before lifting the hood, check that the wiper  The liftgate release function is disabled when Be sure the hood is fully latched before arms are not in motion and not in the lifted the vehicle is in motion.

  • Page 66: Closing

    GETTING TO KNOW YOUR VEHICLE If the liftgate is left open, the interior dome light NOTE: will shut off after a few minutes to conserve Before closing the liftgate, make sure to be in battery life. possession of the key because the liftgate will be locked automatically.
  • Page 67 GETTING TO KNOW YOUR VEHICLE Access To The Loading Floor Access To Tire Service Kit Or Spare Tire To access the double load compartment, To access the Tire Service Kit or spare tire and proceed as follows: container carrier, proceed as follows: 1.

  • Page 68: Internal Equipment

    GETTING TO KNOW YOUR VEHICLE INTERNAL EQUIPMENT Lower Glove Compartment Cargo Box — If Equipped The cargo area contains a preformed cargo box To open the lower glove compartment, pull Storage that can be used for the storage of objects that outward on the latch and lower the glove allows you to obtain a uniform level when compartment door.

  • Page 69: Cupholders

    GETTING TO KNOW YOUR VEHICLE Front Armrest Push the storage handle and lift up the armrest Sun Visors “Slide-On-Rod” to access the storage compartment. The front armrest is located between the front Sun visors are located on both sides of the rear- seats.

  • Page 70: Power Outlets

    GETTING TO KNOW YOUR VEHICLE Extendible Sun Visor Power Outlets NOTE: To extend the sun visor, proceed as follows: There is one 12 Volt (13 Amp) power outlet in Do not exceed the maximum power of  this vehicle, located under the climate controls. 160 Watts (13 Amps) at 12 Volts.

  • Page 71: Cigar Lighter - If Equipped

    GETTING TO KNOW YOUR VEHICLE Cigar Lighter — If Equipped Ashtray — If Equipped Grab Handles This is located on the instrument panel, below The Grab Handles are located immediately NOTE: the climate controls. To activate the cigar lighter, above the doors. The rear handles are equipped Ashtrays can be purchased at an authorized push and release the knob.

  • Page 72: Roof Luggage Rack - If Equipped

    GETTING TO KNOW YOUR VEHICLE ROOF LUGGAGE RACK — IF EQUIPPED WARNING! CAUTION! (Continued) Your vehicle may be equipped with a Roof Cargo must be securely tied down before Place a blanket or other protection between  Luggage Rack for transporting accessories. driving your vehicle.

  • Page 73: Getting To Know Your Instrument Panel

    GETTING TO KNOW YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER Instrument Cluster NOTE: The illumination of the graphics on the instrument cluster may vary according to the version (Monocolor or Color display).

  • Page 74: Instrument Cluster Descriptions

    GETTING TO KNOW YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DISPLAY Instrument Cluster Descriptions 4. Engine Coolant Temperature The temperature gauge on the instru-  1. Speedometer The vehicle can be equipped with multi func- ment panel displays the temperature of Indicates the speed of the car. tional instrument cluster display which offers ...

  • Page 75: Instrument Cluster Display Control Buttons

    GETTING TO KNOW YOUR INSTRUMENT PANEL Instrument Cluster Display Control Buttons Push the up arrow button to scroll upward Engine Oil Change Reset  through the main menus and submenus The system allows the driver to select informa- Your vehicle may be equipped with an engine oil (Speedometer, Trip, Drive Mode Selector, tion by pushing the following buttons mounted change indicator system.

  • Page 76: Instrument Cluster Display Main Menu

    GETTING TO KNOW YOUR INSTRUMENT PANEL Instrument Cluster Display Main Menu Drive Mode Selector — If Equipped Security   The Main Menu is composed of several options Safety & Assistance Auto Mode   that can be selected using the control buttons Lights Sport Mode ...
  • Page 77 GETTING TO KNOW YOUR INSTRUMENT PANEL Trip A Drive Mode Selector Driver Assist  This instrument cluster display menu/submenu This menu item allows you to change the View Trip A distance (miles or km).  items allows you to view and select information settings (Notice LaneSense and Intensity View travel time A (hours/minutes/ ...
  • Page 78 GETTING TO KNOW YOUR INSTRUMENT PANEL "USB": title display or song number playing. Refer to “Uconnect Settings” in “Multimedia” Navigation  for more information. If activated, this menu item will display naviga- "Ipod": display the song title and graphic  tion status and directions.
  • Page 79 GETTING TO KNOW YOUR INSTRUMENT PANEL Units Security Park Assist: A selection of the type of informa-  tion provided by Park Assist. By selecting the item "Units Of Measure,” you By selecting the item “Security,” you can make can select the unit of measure used in the the following adjustments: Park Assist Vol.: A selection of the volume of ...
  • Page 80 GETTING TO KNOW YOUR INSTRUMENT PANEL Lights Auto Unlock On Exit: Automatic unlocking of the Engine OFF Procedure — If Equipped: Allows   doors when exiting the vehicle. you to turn off the engine from the instrument By selecting the item "Lights," you can make the cluster in the event of an ignition switch failure.

  • Page 81: Warning Lights And Messages

    GETTING TO KNOW YOUR INSTRUMENT PANEL WARNING LIGHTS AND MESSAGES is either not on during startup, stays on, or turns half of the dual brake system is indicated by the on while driving, have the system inspected at Brake Warning Light, which will turn on when The warning/indicator lights will illuminate in an authorized dealer as soon as possible.
  • Page 82 GETTING TO KNOW YOUR INSTRUMENT PANEL Operation of the Brake Warning Light can be Coolant Temperature Warning Light WARNING! checked by turning the ignition switch from the This light warns of an overheated OFF position to the ON/RUN position. The light Continued operation with reduced assist engine condition.

  • Page 83: Yellow Warning Lights

    GETTING TO KNOW YOUR INSTRUMENT PANEL If the light continues to flash when the vehicle is Seat Belt Reminder Warning Light Vehicle Security Warning Light — If Equipped running, immediate service is required and you This warning light indicates when the This light will flash at a fast rate for may experience reduced performance, an driver or passenger seat belt is...
  • Page 84 GETTING TO KNOW YOUR INSTRUMENT PANEL Anti-Lock Brake (ABS) Warning Light Electronic Stability Control (ESC) Active Warning Electronic Stability Control (ESC) OFF Warning Light — If Equipped Light — If Equipped This warning light monitors the This warning light will indicate when This warning light indicates the Elec- Anti-Lock Brake System (ABS).
  • Page 85 GETTING TO KNOW YOUR INSTRUMENT PANEL Drive Mode System Overheating Engine Check/Malfunction Indicator Warning WARNING! Light (MIL) This symbol appears, together with a A malfunctioning catalytic converter, as dedicated message on the display, in The Engine Check/Malfunction Indi- referenced above, can reach higher cator Light (MIL) is a part of an case of overheating of the Drive Mode temperatures than in normal operating...
  • Page 86 GETTING TO KNOW YOUR INSTRUMENT PANEL vehicle has tires of a different size than the size Service Warning Light — If Equipped Tire Pressure Monitoring System (TPMS) Warning Light indicated on the vehicle placard or tire inflation The “Maintenance Plan” includes pressure label, you should determine the The warning light switches on and a vehicle maintenance at fixed intervals.
  • Page 87 GETTING TO KNOW YOUR INSTRUMENT PANEL Your vehicle has also been equipped with a CAUTION! WARNING! TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS The TPMS has been optimized for the If you continue operating the vehicle when malfunction indicator is combined with the low original equipment tires and wheels.

  • Page 88: Yellow Indicator Lights

    GETTING TO KNOW YOUR INSTRUMENT PANEL Refer to “LaneSense — If Equipped" in “Starting Fuel Cutoff Failure Light — If Equipped Immobilizer Fail / VPS Electrical Alarm Indicator Light And Operating” for further information. This light will illuminate if there is a This telltale will illuminate when the fuel cutoff failure.

  • Page 89: White Indicator Lights

    GETTING TO KNOW YOUR INSTRUMENT PANEL Park / Headlight On Indicator Light Refer to “LaneSense — If Equipped" in “Starting Speed Warning Indicator Light — If Equipped And Operating” for further information. This indicator light will illuminate The indicator light will illuminate white when the park lights or headlights are along with a notification text message Stop / Start Active Indicator Light —...

  • Page 90: Gray Indicator Lights

    GETTING TO KNOW YOUR INSTRUMENT PANEL Gray Indicator Lights CAUTION! WARNING! Speed Control Ready/Canceled Indicator Light Prolonged driving with the MIL on could ONLY an authorized service technician   This light will turn on when the speed cause further damage to the emission control should connect equipment to the OBD II control has been turned on, but not system.

  • Page 91: Emissions Inspection And Maintenance

    GETTING TO KNOW YOUR INSTRUMENT PANEL EMISSIONS INSPECTION AND NOTE: If your OBD II system is not ready, you should If you crank or start the engine, you will have to see an authorized dealer or repair facility. If your MAINTENANCE PROGRAMS start this test over.

  • Page 92: Safety

    SAFETY SAFETY FEATURES The clicking sound of solenoid valves  WARNING! (Continued) Brake pedal pulsations  Anti-Lock Brake System (ABS) The ABS cannot prevent the natural laws of  physics from acting on the vehicle, nor can it A slight drop of the brake pedal at the end of ...

  • Page 93: Electronic Brake Control (Ebc) System

    SAFETY Anti-Lock Brake Warning Light Torque (DST) and Electronic Roll Mitigation the benefit of the system, you must apply (ERM). These systems work together to continuous braking pressure during the stop- The yellow “Anti-Lock Brake Warning Light” will turn enhance both vehicle stability and control in ping sequence, (do not “pump”...
  • Page 94 SAFETY Dynamic Steering Torque (DST) Electronic Brake Force Distribution (EBD) WARNING! Dynamic Steering Torque (DST) is a feature of Electronic Brake Force (EBD) manages the Many factors, such as vehicle loading, road the ESC and Electric Power Steering (EPS) distribution of the braking torque between the conditions and driving conditions, influence modules that provides torque at the steering front and rear axles by limiting braking pressure...
  • Page 95 SAFETY ESC uses sensors in the vehicle to determine WARNING! WARNING! (Continued) the vehicle path intended by the driver and compares it to the actual path of the vehicle. Electronic Stability Control (ESC) cannot Vehicle modifications, or failure to properly ...
  • Page 96 SAFETY ESC On NOTE: The following conditions must be met in order When traveling on snowy roads with snow chains, for HSA to activate: All active safety systems are enabled. This is the it may be helpful to activate "Partial Off" mode: in The feature must be enabled.

  • Page 97: Auxiliary Driving Systems

    SAFETY AUXILIARY DRIVING SYSTEMS Disabling And Enabling HSA WARNING! This feature can be turned on or turned off. To Blind Spot Monitoring (BSM) — If Equipped There may be situations where the Hill Start change the current setting, proceed as follows: Assist (HSA) will not activate and slight The Blind Spot Monitoring (BSM) system uses For vehicles equipped with the instrument...
  • Page 98 SAFETY When the vehicle is started, the BSM warning If a trailer is connected to the vehicle, it is The BSM system notifies the driver of objects in  necessary to deactivate BSM system manually light will momentarily illuminate in both outside the detection zones by illuminating the BSM rear view mirrors to let the driver know that the by settings menu to avoid a misdetection.
  • Page 99 SAFETY Entering From The Side Vehicles that move into your adjacent lanes from either side of the vehicle. Rear Monitoring Overtaking/Approaching Overtaking Traffic If you pass another vehicle slowly with a relative speed less than 15 mph (25 km/h) and the Side Monitoring vehicle remains in the blind spot for approxi- Entering From The Rear...
  • Page 100 SAFETY The BSM system is designed not to issue an Rear Cross Path (RCP) alert on stationary objects such as guardrails, The Rear Cross Path (RCP) feature is intended posts, walls, foliage, berms, etc. However, occa- to aid the driver when backing out of parking sionally the system may alert on such objects.
  • Page 101 SAFETY NOTE: Modes Of Operation same side at the same time, both the visual and In a parking lot situation, oncoming vehicles can audible alerts will be issued. In addition to the Three selectable modes of operation are avail- be obscured by vehicles parked on either side. If audible alert, the radio (if on) will also be muted.

  • Page 102: Full Brake Control System With Mitigation

    SAFETY Blind Spot Monitoring Fault Warnings NOTE: 2. l'utilisateur de l'appareil doit accepter tout Vehicle must be taken to the nearest authorized brouillage radioélectrique subi, même si le Blinded Sensor dealer for service. brouillage est susceptible d'en comprom- In the case of a blinded sensor: ettre le fonctionnement.
  • Page 103 SAFETY NOTE: If a Full Brake Control System event begins at a The Full Brake Control System alerts may be  speed below 26 mph (42 km/h), the system triggered on objects other than vehicles such Full Brake Control System monitors the infor- ...
  • Page 104 SAFETY "Far", in the case of a potential accident, which Turning Full Brake Control System On Or Off Changing Full Brake Control System Sensitivity will provide a more dynamic driving experience. The Full Brake Control System menu setting is By changing the settings on the menu of the located in the Uconnect settings.
  • Page 105 SAFETY “Brake Control Front Radar Sensor Temporarily directly on the surface, after having the radar The intervention of the system could be unex- Blocked” Warning cover removed. It’s recommended that an pected or delayed. The driver must therefore authorized dealer performs this operation. always pay particular attention, while main- The “Brake Control Front Radar Sensor Tempo- taining control of the car to drive in complete...
  • Page 106 SAFETY Small Vehicles And/Or Not Aligned To The Lane General Information The following regulatory statement applies to all The system is not able to detect the presence of Radio Frequency (RF) devices equipped in this vehicles that are in front of the car but placed vehicle: outside the field of action of the radar sensor and could therefore not react in the presence of...

  • Page 107: Tire Pressure Monitoring System (Tpms)

    SAFETY La operación de este equipo está sujeta a las cold tire inflation pressure must not exceed the toring Warning Light will turn off once the siguientes dos condiciones: maximum inflation pressure molded into the system receives the updated tire pressures. The tire sidewall.
  • Page 108 SAFETY NOTE: Base System CAUTION! This is the TPMS warning indicator The TPMS is not intended to replace normal tire  The TPMS has been optimized for the original  located in the instrument cluster. care and maintenance, or to provide warning of equipment tires and wheels.
  • Page 109 SAFETY Tire Pressure Monitoring Low Pressure Warnings Check TPMS Warnings NOTE: Your vehicle may be equipped with a compact The Tire Pressure Monitoring Warning Light will The Tire Pressure Monitoring Warning Light will spare wheel and tire assembly. illuminate in the instrument cluster, an acoustic flash on and off for 75 seconds and remain on signal will be activated, and the “Check left or solid when a system fault is detected, an...

  • Page 110: Occupant Restraint Systems

    SAFETY OCCUPANT RESTRAINT SYSTEMS Once you repair or replace the original road tire Le présent appareil est conforme aux CNR  and reinstall it on the vehicle in place of the d`Innovation, Science and Economic Develop- Some of the most important safety features in compact spare tire, the TPMS will update auto- ment applicables aux appareils radio exempts your vehicle are the restraint systems:...

  • Page 111: Seat Belt Systems

    SAFETY 2. A child who is not big enough to wear the 8. Do not lean against the door or window. If Seat Belt Systems vehicle seat belt properly (Refer to “Child your vehicle has side air bags, and deploy- Buckle up even though you are an excellent Restraints”...
  • Page 112 SAFETY Initial Indication based on vehicle speed until the driver and NOTE: occupied outboard front seat passenger seat If BeltAlert has been deactivated and the driver or If the driver is unbuckled when the ignition belts are buckled. The driver should instruct all outboard front seat passenger (if equipped with switch is first in the START or ON/RUN position, occupants to buckle their seat belts.
  • Page 113 SAFETY WARNING! (Continued) WARNING! (Continued) WARNING! (Continued) In a collision, you and your passengers can Wearing your seat belt incorrectly could make A twisted seat belt may not protect you prop-    suffer much greater injuries if you are not your injuries in a collision much worse.
  • Page 114 SAFETY Lap/Shoulder Belt Operating Instructions WARNING! (Continued) 1. Enter the vehicle and close the door. Sit A shoulder belt placed behind you will not  back and adjust the seat. protect you from injury during a collision. You are more likely to hit your head in a collision 2.
  • Page 115 SAFETY 4. Position the lap belt so that it is snug and 6. To release the seat belt, push the red Adjustable Upper Shoulder Belt Anchorage lies low across your hips, below your button on the buckle. The seat belt will In the driver and outboard front passenger abdomen.
  • Page 116 SAFETY NOTE: Seat Belts And Pregnant Women Seat Belt Pretensioner The adjustable upper shoulder belt anchorage is The front outboard seat belt system is equipped equipped with an Easy Up feature. This feature with pretensioning devices that are designed to allows the shoulder belt anchorage to be remove slack from the seat belt in the event of adjusted in the upward position without pushing...
  • Page 117 SAFETY Switchable Automatic Locking Retractors (ALR) If the passenger seating position is equipped WARNING! with an ALR and is being used for normal usage, The seat belts in the passenger seating posi- only pull the seat belt webbing out far enough to Never place a rear-facing child restraint in ...

  • Page 118: Supplemental Restraint Systems (Srs)

    SAFETY How To Disengage The Automatic Locking Mode The air bag system must be ready to protect you Air Bag Warning Light in a collision. The Occupant Restraint Controller The Occupant Restraint Controller Unbuckle the combination lap/shoulder belt (ORC) monitors the internal circuits and inter- (ORC) monitors the readiness of the and allow it to retract completely to disengage connecting wiring associated with the electrical...
  • Page 119 SAFETY The ORC also includes diagnostics that will illumi- Front Air Bags WARNING! nate the instrument panel Air Bag Warning Light This vehicle has front air bags and lap/shoulder if a malfunction is detected that could affect the Ignoring the Air Bag Warning Light in your belts for both the driver and front passenger.
  • Page 120 SAFETY may receive information from the front impact WARNING! WARNING! (Continued) sensors (if equipped) or other system compo- Being too close to the steering wheel or nents. Do not put anything on or around the air bag   instrument panel during front air bag deploy- covers or attempt to open them manually.
  • Page 121 SAFETY On the other hand, depending on the type and Knee Impact Bolsters Supplemental Side Air Bags location of impact, front air bags may deploy in The Knee Impact Bolsters help protect the Supplemental Seat-Mounted Side Air Bags crashes with little vehicle front-end damage but knees of the driver and front passenger, and (SABs) that produce a severe initial deceleration.
  • Page 122 SAFETY When the SAB deploys, it opens the seam on The SABIC deploys downward, covering the side the outboard side of the seatback’s trim cover. windows. An inflating SABIC pushes the outside The inflating SAB deploys through the seat edge of the headliner out of the way and covers seam into the space between the occupant and the window.
  • Page 123 SAFETY Side Impacts Side Air Bags are a supplement to the seat belt WARNING! restraint system. Side Air Bags deploy in less The Side Air Bags are designed to activate in time than it takes to blink your eyes. Side Air Bags need room to inflate. Do not ...
  • Page 124 SAFETY Rollover Events Air Bag System Components If A Deployment Occurs The front air bags are designed to deflate imme- Side Air Bags and seat belt pretensioners are NOTE: diately after deployment. designed to activate in certain rollover events. The Occupant Restraint Controller (ORC) moni- The Occupant Restraint Controller (ORC) deter- tors the internal circuits and interconnecting NOTE:...
  • Page 125 SAFETY As the air bags deflate, you may see some NOTE: Your vehicle may also be designed to perform  smoke-like particles. The particles are a normal any of these other functions in response to the Air bag covers may not be obvious in the inte- ...
  • Page 126 SAFETY before resetting the system and starting the fuel tank before resetting the system and Enhanced Accident Response System Reset Procedure engine. If there are no fuel leaks or damage to starting the engine. the vehicle electrical devices (e.g. headlights) After the event occurs, when the system is Depending on the nature of the event the left after an accident, reset the system by following...
  • Page 127 SAFETY Customer Will See Customer Action NOTE: Each step MUST BE held for at least two seconds Right turn light BLINKS. 6. Place turn signal in neutral state. Left turn light is OFF. Right turn light is ON SOLID. 7. Turn right turn signal switch ON. Left turn light BLINKS.
  • Page 128 SAFETY for a short period of time, typically 30 seconds Maintaining Your Air Bag System WARNING! (Continued) or less. The EDR in this vehicle is designed to WARNING! record such data as: Do not attempt to modify any part of your air ...

  • Page 129: Child Restraints

    SAFETY To read data recorded by an EDR, special equip- Before buying any restraint system, make sure WARNING! ment is required, and access to the vehicle or that it has a label certifying that it meets all the EDR is needed. In addition to the vehicle In a collision, an unrestrained child can applicable Safety Standards.
  • Page 130 SAFETY Summary Of Recommendations For Restraining Children In Vehicles Child Size, Height, Weight Or Age Recommended Type Of Child Restraint Infants and Toddlers Children who are two years old or younger and Either an Infant Carrier or a Convertible Child who have not reached the height or weight Restraint, facing rearward in a rear seat of the vehicle...
  • Page 131 SAFETY Older Children And Child Restraints Children Too Large For Booster Seats WARNING! Children who are two years old or who have Children who are large enough to wear the Improper installation can lead to failure of an  outgrown their rear-facing convertible child seat shoulder belt comfortably, and whose legs are infant or child restraint.
  • Page 132 SAFETY If the answer to any of these questions was “no, belt out of position. If the shoulder belt contacts WARNING! ” then the child still needs to use a booster seat the face or neck, move the child closer to the in this vehicle.
  • Page 133 SAFETY Lower Anchors And Tethers For CHildren (LATCH) Your vehicle is equipped with the child restraint LATCH Positions For Installing Child Restraints In Restraint System This Vehicle anchorage system called LATCH, which stands for Lower Anchors and Tethers for CHildren. The LATCH system has three vehicle anchor points for installing LATCH-equipped child seats.
  • Page 134 SAFETY Frequently Asked Questions About Installing Child Restraints With LATCH What is the weight limit (child’s weight + weight of the 65 lbs (29.5 kg) Use the LATCH anchorage system until the combined weight of child restraint) for using the LATCH anchorage system to the child and the child restraint is 65 lbs (29.5 kg).
  • Page 135 SAFETY Locating The LATCH Anchorages Locating The Upper Tether Anchorages Center Seat LATCH: The lower anchorages are round bars There are tether strap anchorages WARNING! that are found at the rear of the seat behind each rear seating position Do not install a child restraint in the center cushion where it meets the seatback, located on the back of the seat.
  • Page 136 SAFETY Always follow the directions of the child 3. Attach the lower hooks or connectors of How To Stow An Unused Switchable-ALR (ALR) Seat Belt: restraint manufacturer when installing your the child restraint to the lower anchorages child restraint. Not all child restraint systems in the selected seating position.
  • Page 137 SAFETY The seat belts in the passenger seating posi- Lap/Shoulder Belt Systems For Installing Child WARNING! (Continued) Restraints In This Vehicle tions are equipped with a Switchable Automatic Locking Retractor (ALR) that is designed to keep Child restraint anchorages are designed to ...
  • Page 138 SAFETY Frequently Asked Questions About Installing Child Restraints With Seat Belts What is the weight limit (child’s weight + weight of the Weight limit of the Child Always use the tether anchor when using the seat belt to child restraint) for using the Tether Anchor with the seat Restraint install a forward facing child restraint, up to the belt to attach a forward facing child restraint?
  • Page 139 SAFETY 2. Pull enough of the seat belt webbing from 7. Finally, pull up on any excess webbing to Installing Child Restraints Using The Top Tether Anchorage: the retractor to pass it through the belt tighten the lap portion around the child path of the child restraint.

  • Page 140: Transporting Pets

    SAFETY 1. Look behind the seating position where 3. Attach the tether strap hook of the child WARNING! you plan to install the child restraint to find restraint to the top tether anchorage as the tether anchorage. You may need to shown in the diagram.

  • Page 141: Safety Tips

    SAFETY SAFETY TIPS Exhaust Gas The best protection against carbon monoxide entry into the vehicle body is a properly main- Transporting Passengers WARNING! tained engine exhaust system. NEVER TRANSPORT PASSENGERS IN THE Whenever a change is noticed in the sound of Exhaust gases can injure or kill.

  • Page 142: Safety Checks You Should Make Inside The Vehicle

    SAFETY Safety Checks You Should Make Inside The Refer to “Occupant Restraint Systems” in WARNING! “Safety” for further information. Vehicle An improperly attached, damaged, folded, or Defroster Seat Belts stacked floor mat, or damaged floor mat Check operation by selecting the defrost mode Inspect the seat belt system periodically, fasteners may cause your floor mat to interfere and place the blower control on high speed.

  • Page 143: Periodic Safety Checks You Should Make Outside The Vehicle

    SAFETY Lights WARNING! (Continued) WARNING! (Continued) Have someone observe the operation of brake ONLY use the driver’s side floor mat on the If the vehicle carpet has been removed and   lights and exterior lights while you work the driver’s side floor area.

  • Page 144: Starting And Operating

    STARTING AND OPERATING STARTING THE ENGINE Proceed as follows: If Engine Fails To Start If the engine fails to start after you have 1. Set the Electric Park Brake (EPB) and put Before starting your vehicle, adjust your seat, followed the "Normal Starting" or "Cold Weather the gear selector in the PARK or NEUTRAL adjust the inside and outside mirrors, fasten Operation"...

  • Page 145: Cold Weather Operation

    STARTING AND OPERATING engine block heater has not been used. The CAUTION! WARNING! (Continued) message “Plug in Engine Heater” will be displayed in the instrument cluster when the To prevent damage to the starter, do not If the vehicle has a discharged battery, ...

  • Page 146: Turbocharger "Cool Down" - If Equipped

    STARTING AND OPERATING ENGINE BREAK-IN RECOMMENDATIONS NOTE: NOTE: If the vehicle fails to shut off using the ignition, A new engine may consume some oil during its A long break-in period is not required for the refer to “Instrument Cluster Display” in “Getting first few thousand miles (kilometers) of opera- engine and drivetrain (transmission and axle) in To Know Your Instrument Panel”...
  • Page 147 STARTING AND OPERATING If the Auto Park Brake feature is enabled, the NOTE: EPB will automatically engage whenever the When parking on a hill, it is important to turn  transmission is placed into PARK, or with a the front wheels toward the curb on a downhill manual transmission, when the ignition switch grade and away from the curb on an uphill is in the STOP/OFF position.

  • Page 148: Auto Park Brake

    STARTING AND OPERATING EPB switch for as long as engagement is Auto Park Brake WARNING! (Continued) desired. The brake warning lamp could illumi- The EPB can be programmed to be applied nate in case of the hydraulic system is not avail- Do not leave the key fob in or near the vehicle ...

  • Page 149: Safehold

    STARTING AND OPERATING SafeHold The clutch pedal is not pressed. Uconnect Settings in your vehicle. This menu  based system will guide you through the steps SafeHold is a safety feature of the EPB system The seat belt is unbuckled. ...

  • Page 150: Automatic Transmission - If Equipped

    STARTING AND OPERATING AUTOMATIC TRANSMISSION — IF When brake service work is complete, the WARNING! (Continued) following steps must be followed to reset the EQUIPPED parking brake system to normal operation: Unintended movement of a vehicle could  injure those in or near the vehicle. As with all Ensure the vehicle is at a standstill.

  • Page 151: Gear Selector

    STARTING AND OPERATING NOTE: The nine-speed transmission has been devel- CAUTION! oped to meet the needs of current and future If the gear selector cannot be moved to the  Shift into or out of PARK or REVERSE only FWD/AWD vehicles. Software and calibration is ...

  • Page 152: Gear Ranges

    STARTING AND OPERATING When exiting the vehicle, always: CAUTION! WARNING! (Continued) Apply the parking brake.  After selecting any gear range, wait a moment It is dangerous to shift out of PARK or  Shift the transmission into PARK.  to allow the selected gear to engage before NEUTRAL if the engine speed is higher than accelerating.
  • Page 153 STARTING AND OPERATING The following indicators should be used to WARNING! WARNING! (Continued) ensure that you have properly engaged the transmission into the PARK position: Do not coast in NEUTRAL and never turn off Never leave children alone in a vehicle, or ...
  • Page 154 STARTING AND OPERATING DRIVE (D) If the transmission becomes extremely hot, the Operation “Transmission Temperature Warning Light” When the gear selector is in the AutoStick posi- This range should be used for most city and may illuminate and the transmission may highway driving.

  • Page 155: Transmission Limp Home Mode

    STARTING AND OPERATING You can start out (from a stop) in FIRST or 3. Turn the ignition off.  WARNING! SECOND gear. Starting out in SECOND gear can 4. Wait approximately ten seconds. be helpful in snow or icy conditions. Tap the gear Do not downshift for additional engine braking on selector forward or rearward to select the desired a slippery surface.

  • Page 156: Brake/Transmission Shift Interlock System

    STARTING AND OPERATING Brake/Transmission Shift Interlock System The Dynamic Selector consists of the following CAUTION! positions: This vehicle is equipped with a Brake Transmis- All wheels must have the same size and type Auto Mode – This mode is designed for comfort sion Shift Interlock system (BTSI) that holds the tires.

  • Page 157: Electric Power Steering

    STARTING AND OPERATING ELECTRIC POWER STEERING NOTE: To Activate The Autostop Mode, The Following Must Occur: Even if the power steering assistance is no  The Electric Power Steering system will give you The system must be in STOP/START READY ...

  • Page 158: Possible Reasons The Engine Does Not Autostop

    STARTING AND OPERATING Possible Reasons The Engine Does Not Engine has not reached normal operating To Start The Engine While In Autostop Mode  temperature. Autostop While in a forward gear, the engine will start when the brake pedal is released or the throttle Prior to engine shut down, the system will check The transmission is not in a forward gear.

  • Page 159: To Manually Turn Off The Stop/Start System

    STARTING AND OPERATING Conditions That Force An Application Of The To Manually Turn Off The Stop/Start 4. The Stop/Start system will reset itself back Electric Park Brake While In Autostop Mode: to the ON mode every time the ignition is System turned off and back on.

  • Page 160: Speed Control - If Equipped

    STARTING AND OPERATING SPEED CONTROL — IF EQUIPPED NOTE: To Set A Desired Speed In order to ensure proper operation, the Speed Turn the Speed Control on. When engaged, the Speed Control takes over Control System has been designed to shut down accelerator operations at speeds greater than if multiple Speed Control functions are operated NOTE:...

  • Page 161: To Accelerate For Passing

    STARTING AND OPERATING If the button is continually pushed, the set U.S. Speed (mph) To Accelerate For Passing  speed will continue to increase until the button Pushing the SET (-) button once will result in a  Press the accelerator as you would normally. is released, then the new set speed will be 1 mph decrease in set speed.

  • Page 162: To Resume Speed

    STARTING AND OPERATING To Resume Speed function performs differently. Please refer to You can change the mode by using the cruise the proper section within this chapter. control buttons. The two control modes function To resume a previously set speed, push the RES differently.

  • Page 163: Adaptive Cruise Control (Acc) Operation

    STARTING AND OPERATING Adaptive Cruise Control (ACC) Operation NOTE: WARNING! (Continued) Any chassis/suspension or tire size modifications The Speed Control buttons (located on the right to the vehicle will affect the performance of the Cannot take street, traffic, and  side of the steering wheel) operate the ACC weather conditions into account, and Adaptive Cruise Control and Forward Collision...

  • Page 164: Activating Adaptive Cruise Control (Acc)

    STARTING AND OPERATING To turn the system off, push and release the Activating Adaptive Cruise Control (ACC) When the Electronic Stability Control (ESC),  Anti-Lock Brake System (ABS), or other stability Adaptive Cruise Control (ACC) on/off button The minimum set speed for the ACC system is again.

  • Page 165: To Cancel

    STARTING AND OPERATING To Cancel To Resume ment Panel” for more information. The speed increment shown is dependent on the chosen The following conditions cancel the system: If there is a set speed in the memory, push the speed unit of U.S. (mph) or Metric (km/h): RES button and then remove your foot from the The brake pedal is applied.
  • Page 166 STARTING AND OPERATING To Decrease Speed Metric Speed (km/h) The ACC system decelerates the vehicle to a  full stop when following a target vehicle. If an Pushing the SET (-) button once will result in a  While ACC is set, the set speed can be ACC host vehicle follows a target vehicle to a 1 km/h decrease in set speed.

  • Page 167: Setting The Following Distance In Acc

    STARTING AND OPERATING Setting The Following Distance In ACC The specified following distance for ACC can be set by varying the distance setting between four bars (longest), three bars (long), two bars (medium) and one bar (short). Using this distance setting and the vehicle speed, ACC calculates and sets the distance to the vehicle ahead.

  • Page 168: Overtake Aid

    STARTING AND OPERATING The vehicle will then maintain the set distance Adaptive Cruise Control (ACC) Menu until: The instrument cluster display shows the The vehicle ahead accelerates to a speed  current ACC system settings. The instrument above the set speed. cluster display is located in the center of the instrument cluster.

  • Page 169: Display Warnings And Maintenance

    STARTING AND OPERATING The ACC screen may display once again if any cases, the instrument cluster display will read To keep the ACC System operating properly, it is ACC activity occurs, which may include any of “ACC/FCW Unavailable Wipe Front Radar important to note the following maintenance the following: Sensor”...

  • Page 170: Precautions While Driving With Acc

    STARTING AND OPERATING NOTE: The “ACC/FCW Limited Functionality Wipe Front Service ACC/FCW Warning Windshield” message can sometimes be If the system turns off, and the instrument If the “ACC Front Radar Sensor Temporarily  displayed while driving in adverse weather cluster display reads “ACC/FCW Limited Func- Blocked”...
  • Page 171 STARTING AND OPERATING Offset Driving Turns And Bends Using ACC On Hills ACC may not detect a vehicle in the same lane When driving on a curve with ACC engaged, the When driving on hills, ACC may not detect a that is offset from your direct line of travel, or a system may decrease the vehicle speed and accel- vehicle in your lane.
  • Page 172 STARTING AND OPERATING Lane Changing Narrow Vehicles Stationary Objects And Vehicles ACC may not detect a vehicle until it is Some narrow vehicles traveling near the outer ACC does not react to stationary objects and completely in the lane in which you are trav- edges of the lane or edging into the lane are not stationary vehicles.

  • Page 173: General Information

    STARTING AND OPERATING General Information La operación de este equipo está sujeta a las button will result in turning on (changing to) the siguientes dos condiciones: Normal (Fixed Speed) Cruise Control mode. The following regulatory statement applies to all Radio Frequency (RF) devices equipped in this 1.
  • Page 174 STARTING AND OPERATING If the button is continually pushed, the set Metric Speed (km/h) To Vary The Speed Setting  speed will continue to increase in 5 km/h Pushing the SET (-) button once will result in a To Increase Speed ...

  • Page 175: Rear Park Assist - If Equipped

    STARTING AND OPERATING To Resume Speed Park Assist can be active only when the gear The frequency of the acoustic signal: selector is in REVERSE. Increases as the distance between vehicle and To resume a previously set speed, push the RES ...

  • Page 176: Enabling And Disabling Park Assist

    STARTING AND OPERATING Instrument Cluster Display Enabling And Disabling Park Assist Service The Rear Park Assist System Park Assist is displayed on the instrument Park Assist can be enabled and disabled with During vehicle start up, when the Rear Park cluster only if you have selected the item the Park Assist switch.

  • Page 177: Park Assist System Usage Precautions

    STARTING AND OPERATING If a message such as “PARK ASSIST UNAVAIL- Objects such as bicycle carriers, etc., must not  WARNING! (Continued) ABLE SERVICE REQUIRED” appears in the be placed within 12 inches (30 cm) from the rear fascia/bumper while driving the vehicle. instrument cluster display, see an authorized Before using Park Assist, it is strongly recom- ...

  • Page 178: Front And Rear Park Assist - If Equipped

    STARTING AND OPERATING Park Assist is active when the gear selector is The four Park Assist sensors, located in the CAUTION! (Continued) shifted to REVERSE or to a forward gear and an front fascia/bumper, monitor the area in front obstacle is detected, as long as the system is of the vehicle that is within the sensors’...

  • Page 179: Park Assist Display

    STARTING AND OPERATING Park Assist Display Rear Park Assist When the vehicle is in REVERSE, the instrument cluster display will show the park assist ready system status. The system will indicate a detected obstacle by showing a single arc in one or more regions based on the obstacle’s distance and location relative to the vehicle.
  • Page 180 STARTING AND OPERATING The vehicle is close to the obstacle when the warning display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert operation when the system is detecting an obstacle: Fast Tone/Flashing Arc Continuous Tone/Flashing Arc WARNING ALERTS Rear Distance...
  • Page 181 STARTING AND OPERATING Front Park Assist The Park Assist warning screen will be displayed when an obstacle is detected while the vehicle is in DRIVE or REVERSE, as long as the vehicle speed is below 7 mph (11 km/h) when in REVERSE and below 11 mph (18 km/h) when in DRIVE.
  • Page 182 STARTING AND OPERATING The vehicle is close to the obstacle when the warning display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert operation when the system is detecting an obstacle: WARNING ALERTS Front Distance Greater than 39 inches 39-32 inches...

  • Page 183: Enabling And Disabling Park Assist

    STARTING AND OPERATING Front Park Assist Audible Alerts Enabling And Disabling Park Assist SENSORS", "PARK ASSIST UNAVAILABLE WIPE FRONT SENSORS", or the "PARK ASSIST Park Assist will turn off the Front Park Assist Park Assist can be enabled and disabled with UNAVAILABLE SERVICE REQUIRED"...

  • Page 184: Lanesense - If Equipped

    STARTING AND OPERATING LANESENSE — IF EQUIPPED prompt the driver to remain within the lane. LaneSense Warning Message When only a single lane marking is detected, a The LaneSense system will indicate the current LaneSense Operation haptic (torque) warning will not be provided. lane drift condition through the instrument The LaneSense system is operational at speeds cluster display.
  • Page 185 STARTING AND OPERATING When the LaneSense system senses the lane Left Lane Departure — Both Lanes Detected When the LaneSense system senses a lane   has been approached and is in a lane depar- drift situation, the left thick lane line and left When the LaneSense system is on, the lane ...

  • Page 186: Changing Lanesense Status

    STARTING AND OPERATING PARKVIEW REAR BACK UP CAMERA When the LaneSense system senses the lane Changing LaneSense Status  has been approached and is in a lane depar- The LaneSense system has settings to adjust The ParkView Rear Back Up Camera that allows ture situation, the left thick lane line flashes the intensity of the torque warning and the you to see an on-screen image of your vehicle's...
  • Page 187 STARTING AND OPERATING When the vehicle is shifted out of REVERSE A touchscreen button to disable the camera is vehicle and its projected backup path based on (with camera delay turned on), the camera available when the vehicle is not in REVERSE. the steering wheel position.

  • Page 188: Adding Fuel

    STARTING AND OPERATING ADDING FUEL 2. Insert the fuel nozzle in the filler pipe and Emergency Refueling Procedure proceed with filling the fuel tank. If the vehicle is out of fuel, proceed as follows: The Capless Fuel System uses a flapper placed at the filler pipe of the fuel tank;...

  • Page 189: Vehicle Loading

    STARTING AND OPERATING VEHICLE LOADING 2. Open the fuel door. WARNING! 3. Insert the emergency fuel fill funnel in the Certification Label Do not affix objects/plugs to the end of the  filler pipe and proceed to fill the fuel tank. filler neck other than is provided on the car.
  • Page 190 STARTING AND OPERATING The entire vehicle should first be weighed on a Payload Rim Size commercial scale to ensure that the GVWR has The payload of a vehicle is defined as the allow- This is the rim size that is appropriate for the tire not been exceeded.

  • Page 191: Trailer Towing

    STARTING AND OPERATING TRAILER TOWING Gross Trailer Weight (GTW) WARNING! The GTW is the weight of the trailer plus the In this section you will find safety tips and infor- It is important that you do not exceed the weight of all cargo, consumables and equip- mation on limits to the type of towing you can maximum front or rear GAWR.
  • Page 192 STARTING AND OPERATING Trailer Sway Control — Mechanical Weight-Distributing Hitch WARNING! The trailer sway control is a telescoping link that A weight-distributing system works by applying An improperly adjusted Weight Distributing  can be installed between the hitch receiver and leverage through spring (load) bars.

  • Page 193: Trailer Hitch Classification

    STARTING AND OPERATING Trailer Hitch Classification The following chart provides the industry standard for the maximum trailer weight a given trailer hitch class can tow and should be used to assist you in selecting the correct trailer hitch for your intended towing condition. Trailer Hitch Classification Definitions Class Max.

  • Page 194: Trailer And Tongue Weight

    STARTING AND OPERATING Trailer And Tongue Weight Loading Information” placard for the maximum WARNING! (Continued) combined weight of occupants and cargo for your Never exceed the maximum tongue weight vehicle. Safety chains must always be used between  stamped on your bumper or trailer hitch. your vehicle and trailer.
  • Page 195 STARTING AND OPERATING Check for signs of tire wear or visible tire  CAUTION! WARNING! damage before towing a trailer. Refer to “Tires – General Information” in “Servicing And Main- Do not tow a trailer at all during the first Do not connect trailer brakes to your vehicle's ...
  • Page 196 STARTING AND OPERATING Towing Requirements — Trailer Lights And Wiring (If Equipped) Whenever you pull a trailer, regardless of the trailer size, stoplights and turn signals on the trailer are required for motoring safety. The Trailer Tow Package may include a four- and seven-pin wiring harness.

  • Page 197: Towing Tips

    STARTING AND OPERATING Towing Tips AutoStick Cooling System When using the AutoStick shift control, select To reduce potential for engine and transmission Before setting out on a trip, practice turning,  the highest gear that allows for adequate overheating, take the following actions: stopping, and backing the trailer in an area performance and avoids frequent downshifts.

  • Page 198: Recreational Towing (Behind Motorhome, Etc.)

    STARTING AND OPERATING RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Towing This Vehicle Behind Another Vehicle TOWING CONDITION WHEELS OFF THE GROUND ALL-WHEEL DRIVE (AWD) Flat Tow NONE NOT ALLOWED Dolly Tow REAR NOT ALLOWED FRONT NOT ALLOWED On Trailer NOTE: When towing your vehicle, always follow applicable state and provincial laws. Contact state and provincial Highway Safety offices for additional details. NOTE: All-Wheel Drive (AWD) Models CAUTION!

  • Page 199: Driving Tips

    STARTING AND OPERATING DRIVING TIPS Traction Driving Through Water When driving on wet or slushy roads, it is possible Driving through water more than a few inches/ Driving On Slippery Surfaces for a wedge of water to build up between the tire centimeters deep will require extra caution to Information in this section will aid in safe and road surface.
  • Page 200 STARTING AND OPERATING Shallow Standing Water CAUTION! CAUTION! (Continued) Although your vehicle is capable of driving Always check the depth of the standing water Driving through standing water may cause   through shallow standing water, consider the before driving through it. Never drive through damage to your vehicle’s drivetrain compo- following Cautions and Warnings before doing so.

  • Page 201: In Case Of Emergency

    IN CASE OF EMERGENCY HAZARD WARNING FLASHERS BULB REPLACEMENT NOTE: Lens fogging can occur under certain atmo- The Hazard Warning flashers switch is located General Information spheric conditions. This will usually clear as on the switch bank below the radio. atmospheric conditions change to allow the Before you replace a bulb, check the contacts ...

  • Page 202: Replacement Bulbs

    IN CASE OF EMERGENCY Replacement Bulbs Interior Lamps Lamp Name Lamp Number Front Courtesy Light Front Courtesy Lights (Sun Visors) Rear Dome Light (Models Without Retractable Roof) Rear Interior Lights (Models With Retractable Roof) Interior Lights Dome Light (Glove Compartment) Exterior Lamps Lamp Name Lamp Number...

  • Page 203: Replacing Exterior Bulbs

    IN CASE OF EMERGENCY Exterior Lamps Lamp Name Lamp Number Turn Indicators WY21W Center High Mounted Stop Lamp (CHMSL) LED (Serviced At An Authorized Dealer) Reverse P21W License Plate Lamp Replacing Exterior Bulbs Hi/Lo Beam Light Halogen 2. Rotate the headlamp bulb socket counter- clockwise then pull outwards.
  • Page 204 IN CASE OF EMERGENCY 3. Release the locking tab on the headlamp Side Marker bulb connector and remove the bulb and Side marker lights are LED-type. For replacing socket. these bulbs, contact an authorized dealer Front Direction Indicator Lamp To replace the bulbs proceed as follows: 1.
  • Page 205 IN CASE OF EMERGENCY 3. Turn the bulb and bulb holder assembly Fog Lights (Halogen) 4. Replace the bayonet-fitted bulb. counterclockwise and then remove it To replace the bulbs proceed as follows: sliding it outwards. 1. Turn the front wheels completely. 4.
  • Page 206 IN CASE OF EMERGENCY Side Indicators on External Rear View Mirrors – 2. Remove the transparent lens assembly as Rear Tail Lamps If Equipped shown. 3. Remove the bulb socket and bulb from the CAUTION! transparent lens assembly by rotating the The procedure is described as a guideline.
  • Page 207 IN CASE OF EMERGENCY 3th Stop Lamp 4. Locate faulty bulb and press slightly and turn at the same time: counterclockwise to The CHMSL is LED. For their replacement see extract; clockwise to install. an authorized dealer. 5. Reposition the bulb holder assembly in the Reversing Light &...

  • Page 208: Replacing Interior Bulbs

    IN CASE OF EMERGENCY 3. Insert the new bulbs, and ensure that they 2. Release the retainer clips and bulb are properly locked between the contacts. housing as shown. 4. Reinstall the license plate lens. NOTE: If removal the license plate lens using a suitable tool, be sure to cover the tip of the suitable with a cloth so no damage is done to the lenses or the vehicle paint.
  • Page 209 IN CASE OF EMERGENCY Dome Light Vanity Mirror Dome Light Glove Compartment Rear Dome Light — Without Retractable Roof To replace the bulbs proceed as follows: To replace the bulb proceed as follows: To replace the bulbs proceed as follows: 1.
  • Page 210 IN CASE OF EMERGENCY Dome Light Interior Cargo Lights To replace the bulbs proceed as follows: To replace the bulbs proceed as follows: 1. Lower the handle in the direction shown 1. Open the luggage compartment and remove the dome light assembly. remove the dome light.

  • Page 211: Fuses

    IN CASE OF EMERGENCY FUSES General Information WARNING! The fuses protect electrical systems against Before proceeding with the replacement of  WARNING! excessive current. the lamp wait for the exhaust pipes are cool: When replacing a blown fuse, always use an When a device does not work, you must check DANGER OF BURNS! ...

  • Page 212: Access To The Fuses

    IN CASE OF EMERGENCY Fuse Removal Engine Compartment Fuses/Distribution Unit To replace a fuse use the extractor attached to the fuse cover (located on the inside of the The engine compartment fuse panel is located engine compartment fuse cover.) on the left side of the engine compartment. Fuse Panel And Cover Location 1 —...
  • Page 213 IN CASE OF EMERGENCY Removing Fuse Cover and Locking Screw Mounting Fuse Cover and Locking Screw Proceed as follows: Proceed as follows: 1. Slowly turn the screw counterclockwise. 1. Properly secure the fuse cover to the box, slide completely from top to bottom. 2.
  • Page 214 IN CASE OF EMERGENCY Cavity Maxi Fuse Cartage Fuse Mini Fuse Description – – 15 Amp Blue Pump Power "After run" AGS Supply 40 Amp Orange – – Brake Control Module Pump – – 5 Amp Tan Engine Control Module Power, Automatic Transmission –...

  • Page 215: Body Computer Fuse Center

    IN CASE OF EMERGENCY Body Computer Fuse Center The controller is located at the left side of the steering column at the bottom of the instrument panel. For the fuse replacement see an authorized dealer. Body Controller Fuse Cavities...
  • Page 216 IN CASE OF EMERGENCY Cavity Mini Fuse Description 7.5 Amp Brown Fan Air Conditioning, Power Socket 20 Amp Yellow Power Window Front (Passenger Side) 20 Amp Yellow Power Window Front (Driver’s Side) 15 Amp Blue Supply Uconnect System, Air Conditioning, USB Port, Rear lateral ceiling light in case of open roof, EOBD port 10 Amp Red System Power Forward Collision Warning Plus, All Wheel Drive (AWD), IPC, Central stack switches,...

  • Page 217: Rear Cargo Fuse/Relay Distribution Unit

    IN CASE OF EMERGENCY Rear Cargo Fuse/Relay Distribution Unit Push on the left side of the access door to unhinge and remove. To access the fuses, remove the access door from the left rear panel of the rear cargo area. Rear Cargo Fuse Cavities Access Door Location Cavity...

  • Page 218: Jacking And Tire Changing

    IN CASE OF EMERGENCY JACKING AND TIRE CHANGING Jack Location/Spare Tire Stowage — If Equipped WARNING! The jack and tools are located in the rear storage compartment if equipped, inside a Do not attempt to change a tire on the side of ...

  • Page 219: Preparations For Jacking

    IN CASE OF EMERGENCY 4. Remove the jack, wheel bolt wrench, and 4. Place the gear selector into PARK (P). WARNING! wheel chocks (if equipped). 5. Turn the ignition to STOP mode. A loose tire or jack thrown forward in a collision or hard stop could endanger the 6.

  • Page 220: Jacking Instructions

    IN CASE OF EMERGENCY Jacking Instructions 1. Remove the spare tire, jack, and wheel bolt WARNING! (Continued) wrench. WARNING! If working on or near a roadway, be extremely  2. If equipped with wheels where the center careful of motor traffic. Carefully follow these tire changing warnings cap covers the wheel bolts, use the wheel To assure that spare tires, flat or inflated, are...
  • Page 221 IN CASE OF EMERGENCY 4. Place the jack underneath the lift area that is closest to the flat tire. Turn the jack screw clockwise to firmly engage the jack saddle with the lift area of the sill flange, centering the jack saddle inside the cutout in the sill cladding.

  • Page 222: Road Tire Installation

    IN CASE OF EMERGENCY 7. Mount the spare tire. 8. Install the wheel bolts with the threaded WARNING! end of the wheel bolt toward the wheel. CAUTION! Lightly tighten the wheel bolts. A loose tire or jack thrown forward in a collision or hard stop could endanger the Be sure to mount the spare tire with the WARNING!

  • Page 223: Tire Service Kit - If Equipped

    IN CASE OF EMERGENCY TIRE SERVICE KIT — IF EQUIPPED 4. Finish tightening the wheel bolts. Push Tire Service Kit Components And Operation down on the wrench while at the end of the Tire Service Kit Storage handle for increased leverage. Tighten the wheel bolts in a star pattern until each The Tire Service Kit is located in the rear storage wheel bolt has been tightened twice.

  • Page 224: Tire Service Kit Usage Precautions

    IN CASE OF EMERGENCY 2. Insert the power plug into the vehicle WARNING! WARNING! power outlet socket. Start the vehicle engine. Tire Service Kit is not a permanent flat tire The metal end fitting from Power Plug may repair. Have the tire inspected and repaired get hot after use, so it should be handled 3.

  • Page 225: Replacing The Sealant

    IN CASE OF EMERGENCY JUMP STARTING Replacing The Sealant WARNING! (Continued) NOTE: If your vehicle has a discharged battery it can be Keep Tire Service Kit away from open flames  Replace the sealant canister prior to the expira- jump started using a set of jumper cables and a or heat source.

  • Page 226: Preparations For Jump Start

    IN CASE OF EMERGENCY Preparations For Jump Start Jump Starting Procedure WARNING! (Continued) The battery in your vehicle is located in the front WARNING! Remove any metal jewelry such as rings,  of the engine compartment, behind the left watch bands and bracelets that could make headlight assembly.

  • Page 227: If Your Engine Overheats

    IN CASE OF EMERGENCY IF YOUR ENGINE OVERHEATS 4. Connect the opposite end of the negative (-) 2. Disconnect the opposite end of the nega- jumper cable to a good engine ground tive (-) jumper cable from the negative (-) In any of the following situations, you can (exposed metal part of the discharged post of the booster battery.

  • Page 228: Gear Selector Override

    IN CASE OF EMERGENCY GEAR SELECTOR OVERRIDE NOTE: There are steps that you can take to slow down If a malfunction occurs and the gear selector an impending overheat condition: cannot be moved out of the PARK position, you If your Air Conditioner (A/C) is on, turn it off. The ...

  • Page 229: Freeing A Stuck Vehicle

    IN CASE OF EMERGENCY Use the least amount of accelerator pedal pres- CAUTION! sure that will maintain the rocking motion without spinning the wheels or racing the engine. Racing the engine or spinning the wheels  may lead to transmission overheating and Shifts between DRIVE and REVERSE can only be failure.

  • Page 230: Towing A Disabled Vehicle

    IN CASE OF EMERGENCY TOWING A DISABLED VEHICLE This section describes procedures for towing a disabled vehicle using a commercial towing service. Towing Condition Wheels OFF The Ground ALL WHEEL DRIVE Flat Tow NONE NOT ALLOWED Wheel Lift Or Dolly Tow Rear NOT ALLOWED Front...

  • Page 231: Tow Eye Usage - If Equipped

    IN CASE OF EMERGENCY Tow Eye Usage — If Equipped WARNING! CAUTION! (Continued) Your vehicle is equipped with a tow eye that can Stand clear of vehicles when pulling with tow The tow eye must not be used to move the ...

  • Page 232: Enhanced Accident Response System (Ears)

    IN CASE OF EMERGENCY ENHANCED ACCIDENT RESPONSE SYSTEM Insert the wheel bolt wrench handle through the Rear Tow Eye Installation eye and tighten, refer to “Jacking And Tire The rear tow eye receptacle is located behind a (EARS) Changing” in this section for further informa- access door on the rear bumper fascia.

  • Page 233: Servicing And Maintenance

    SERVICING AND MAINTENANCE SCHEDULED MAINTENANCE An authorized dealer will reset the oil change Severe Duty — All Models indicator message after completing the sched- Change Engine Oil at 4,000 miles (6,500 km) if Your vehicle is equipped with an automatic oil uled oil change.

  • Page 234: Maintenance Plan

    SERVICING AND MAINTENANCE Maintenance Plan At Every Oil Change Interval As At Every Oil Change Interval As Required Maintenance Intervals Indicated By Oil Change Indicator Indicated By Oil Change Indicator System: System: At Every Oil Change Interval As Inspect brake pads, shoes, rotors, drums, Inspect engine air filter if using in dusty or Indicated By Oil Change Indicator and hoses.
  • Page 235 SERVICING AND MAINTENANCE Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Check operation of lighting system • • • • • • • • • • • • • • • (headlamps, direction indicators, hazard warning lights, luggage compartment, passenger compartment, glove compartment, instrument panel warning lights, etc.).
  • Page 236 SERVICING AND MAINTENANCE Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Visually inspect condition of: • • • • • • • • exterior bodywork, underbody protection, pipes and hoses (exhaust - fuel system - brakes), rubber elements (boots, sleeves, bushings, etc.).
  • Page 237 SERVICING AND MAINTENANCE Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Inspect the CV/Universal joints. • • • • • • • • • • • • • • • Visual inspect the condition of the • accessory drive belt.
  • Page 238 SERVICING AND MAINTENANCE Mileage or time passed (whichever comes first) Or Years: Or Kilometers: • • • • • • • Replace engine air filter. Replace brake fluid every two years. • • • • • • • Replace cabin filter. ○...

  • Page 239: Heavy Duty Use Of The Vehicle

    SERVICING AND MAINTENANCE Heavy Duty Use Of The Vehicle WARNING! Change engine oil at 4,000 miles (6,500 km) or You can be badly injured working on or  350 hours of engine run time if the vehicle is around a motor vehicle. Do only service work operated in a dusty and off road environment or for which you have the knowledge and the is operated predominately at idle or only very...

  • Page 240: Engine Compartment

    SERVICING AND MAINTENANCE ENGINE COMPARTMENT 1.3L Turbo Engine 1 — Brake Fluid Reservoir Cap 5 — Engine Coolant Pressure Cap 2 — Battery 6 — Engine Coolant Reservoir 3 — Power Distribution Center (Fuses) 7 — Oil Fill Cap/Engine Oil Dipstick 4 —...

  • Page 241: Checking Oil Level

    SERVICING AND MAINTENANCE Checking Oil Level Adding 1 quart (1.0 liters) of oil when the reading is at the low end of the dipstick range To ensure proper engine lubrication, the engine will raise the oil level to the high end of the oil must be maintained at the correct level.

  • Page 242: Maintenance-Free Battery

    SERVICING AND MAINTENANCE DEALER SERVICE Maintenance-Free Battery CAUTION! Your vehicle is equipped with a mainte- An authorized dealer has the qualified service It is essential when replacing the cables on  nance-free battery. You will never have to add personnel, special tools, and equipment to the battery that the positive cable is attached water, nor is periodic maintenance required.

  • Page 243: Engine Oil

    SERVICING AND MAINTENANCE Engine Oil oil filler cap also states the recommended Disposing Of Used Engine Oil And Oil Filters engine oil viscosity grade for your engine. Care should be taken in disposing of used Change Engine Oil engine oil and oil filters from your vehicle. Used Lubricants which do not have both the engine Refer to “Scheduled Servicing”...

  • Page 244: Engine Air Cleaner Filter

    SERVICING AND MAINTENANCE Engine Air Cleaner Filter Accessory Drive Belt Inspection Refer to the “Maintenance Plan” in this section WARNING! for the proper maintenance intervals. Do not attempt to inspect an accessory drive  NOTE: belt with vehicle running. Be sure to follow the “Severe Duty Conditions” When working near the radiator cooling fan, maintenance interval if applicable.

  • Page 245: Air Conditioner Maintenance

    SERVICING AND MAINTENANCE Some conditions can be caused by a faulty A/C Air Filter WARNING! (Continued) component such as a belt pulley. Belt pulleys See an authorized dealer for service. should be carefully inspected for damage and The air conditioning system contains refrig- ...

  • Page 246: Windshield Wiper Blades

    SERVICING AND MAINTENANCE Windshield Wiper Blades The wiper blades and wiper arms should be To have a correct activation of strategy, the inspected periodically, not just when wiper Service Position command (antipanic) must be Clean the rubber edges of the wiper blades and performance problems are experienced.

  • Page 247: Exhaust System

    SERVICING AND MAINTENANCE Front Wiper Blade Removal/Installation Rear Wiper Blade Removal/Installation tioned parts. Open seams or loose connections could permit exhaust fumes to seep into the 1. Lift the front wiper arm upward to raise the 1. Carefully lift the rear wiper arm upward to passenger compartment.

  • Page 248: Cooling System

    SERVICING AND MAINTENANCE NOTE: Cooling System CAUTION! Intentional tampering with emissions control WARNING! The catalytic converter requires the use of systems can result in civil penalties being  unleaded fuel only. Leaded gasoline will assessed against you. You or others can be badly burned by hot ...
  • Page 249 SERVICING AND MAINTENANCE Engine Coolant Checks If the engine coolant (antifreeze) is dirty or Do not use water alone or alcohol-based engine  contains visible sediment, have an authorized coolant (antifreeze) products. Do not use addi- Check the engine coolant (antifreeze) protection tional rust inhibitors or antirust products, as they dealer clean and flush with OAT coolant (anti- every 12 months (before the onset of freezing...
  • Page 250 SERVICING AND MAINTENANCE Please review these recommendations for NOTE: WARNING! using Organic Additive Technology (OAT) engine It is the owner's responsibility to maintain the  coolant (antifreeze) that meets the require- Do not open hot engine cooling system.  proper level of protection against freezing Never add engine coolant (antifreeze) when ments of FCA Material Standard MS.90032.

  • Page 251: Brake System

    SERVICING AND MAINTENANCE Coolant Level If an examination of your engine compartment Do not change the thermostat for Summer or  shows no evidence of radiator or hose leaks, Winter operation. If replacement is ever neces- The coolant expansion bottle provides a quick sary, install ONLY the correct type thermostat.
  • Page 252 SERVICING AND MAINTENANCE Use only manufacturer's recommended brake Brake Master Cylinder WARNING! (Continued) fluid. Refer to “Fluid And Lubricants” in “Tech- The fluid level in the master cylinder should be nical Specifications” for further information. Overfilling the brake fluid reservoir can result ...

  • Page 253: Automatic Transmission

    SERVICING AND MAINTENANCE Automatic Transmission Special Additives malfunction, visit an authorized dealer immedi- ately to have the transmission fluid level The manufacturer strongly recommends Selection Of Lubricant checked. Operating the vehicle with an against using any special additives in the trans- It is important to use the proper transmission improper fluid level can cause severe transmis- mission.

  • Page 254: Raising The Vehicle

    SERVICING AND MAINTENANCE RAISING THE VEHICLE European — Metric tire sizing is based on Euro- Tire Markings  pean design standards. Tires designed to this In the case where it is necessary to raise the standard have the tire size molded into the vehicle, go to an authorized dealer or service sidewall beginning with the section width.
  • Page 255 SERVICING AND MAINTENANCE Tire Sizing Chart EXAMPLE: Example Size Designation: P215/65R15XL 95H, 215/65R15 96H, LT235/85R16C, T145/80D18 103M, 31x10.5 R15 LT P = Passenger car tire size based on US design standards, or "..blank.." = Passenger car tire based on European design standards, or LT = Light truck tire based on US design standards, or T or S = Temporary spare tire or 31 = Overall diameter in inches (in)
  • Page 256 SERVICING AND MAINTENANCE EXAMPLE: H = Speed Symbol A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions  The maximum speed corresponding to the speed symbol should only be achieved under specified operating conditions (i.e., tire pressure, vehicle loading, ...
  • Page 257 SERVICING AND MAINTENANCE EXAMPLE: ABCD = Code used by the tire manufacturer (one to four digits) 03 = Number representing the week in which the tire was manufactured (two digits) 03 means the 3rd week  01 = Number representing the year in which the tire was manufactured (two digits) 01 means the year 2001 ...
  • Page 258 SERVICING AND MAINTENANCE This placard tells you important information Tire Loading And Tire Pressure about the: NOTE: The proper cold tire inflation pressure is listed on 1. Number of people that can be carried in the driver’s side B-Pillar or the rear edge of the the vehicle.
  • Page 259 SERVICING AND MAINTENANCE (4) The resulting figure equals the avail- For further information on GAWRs, vehicle Metric Example For Load Limit loading, and trailer towing, refer to “Vehicle able amount of cargo and luggage load For example, if “XXX” amount equals 635 kg Loading”...
  • Page 260 SERVICING AND MAINTENANCE...

  • Page 261: Tires - General Information

    SERVICING AND MAINTENANCE Safety Both underinflation and overinflation affect the WARNING! stability of the vehicle and can produce a feeling WARNING! Overloading of your tires is dangerous. of sluggish response or over responsiveness in Overloading can cause tire failure, affect the steering.
  • Page 262 SERVICING AND MAINTENANCE Ride Comfort And Vehicle Stability Inflation pressures specified on the placard are Tire Pressures For High Speed Operation always “cold tire inflation pressure”. Cold tire The manufacturer advocates driving at safe Proper tire inflation contributes to a comfort- inflation pressure is defined as the tire pressure speeds and within posted speed limits.
  • Page 263 SERVICING AND MAINTENANCE Radial Ply Tires Run Flat Tires — If Equipped Tire Spinning Run Flat tires allow you the capability to drive When stuck in mud, sand, snow, or ice condi- WARNING! 50 miles (80 km) at 50 mph (80 km/h) after a tions, do not spin your vehicle's wheels above Combining radial ply tires with other types of tires rapid loss of inflation pressure.
  • Page 264 SERVICING AND MAINTENANCE NOTE: Tread Wear Indicators Life Of Tire Wheel Valve Stem must be replaced as well when Tread wear indicators are in the original equip- The service life of a tire is dependent upon installing new tires due to wear and tear in ment tires to help you in determining when your varying factors including, but not limited to: existing tires.

  • Page 265: Tire Types

    SERVICING AND MAINTENANCE It is recommended to replace the two front tires Summer Or Three Season Tires — If Equipped WARNING! (Continued) or two rear tires as a pair. Replacing just one tire Summer tires provide traction in both wet and can seriously affect your vehicle’s handling.

  • Page 266: Spare Tires - If Equipped

    SERVICING AND MAINTENANCE Spare Tires — If Equipped Snow Tires Compact Spare Tire — If Equipped Some areas of the country require the use of The compact spare is for temporary emergency NOTE: snow tires during the Winter. Snow tires can be use only.
  • Page 267 SERVICING AND MAINTENANCE Inflate collapsible tire only after the wheel is Full Size Spare — If Equipped WARNING! properly installed to the vehicle. Inflate the The full size spare is for temporary emergency Compact and collapsible spares are for collapsible tire using the electric air pump use only.

  • Page 268: Wheel And Wheel Trim Care

    SERVICING AND MAINTENANCE chemicals used to melt ice or control dust on WARNING! CAUTION! dirt roads. Use a soft cloth or sponge and mild Limited use spares are for emergency use soap to wipe away promptly. Do not use harsh Do not use scouring pads, steel wool, a only.

  • Page 269: Tire Chains (Traction Devices)

    SERVICING AND MAINTENANCE Dark Vapor Chrome, Black Satin Chrome, or WARNING! CAUTION! (Continued) Low Gloss Clear Coat Wheels Using tires of different size and type (M+S, Do not drive for a prolonged period on dry  CAUTION! Snow) between front and rear axles can pavement.

  • Page 270: Department Of Transportation Uniform

    SERVICING AND MAINTENANCE DEPARTMENT OF TRANSPORTATION Refer to the “Maintenance Plan” in this section for the proper maintenance intervals. The UNIFORM TIRE QUALITY GRADES reasons for any rapid or unusual wear should be corrected prior to rotation being performed. The following tire grading categories The suggested Front Wheel Drive (FWD) rotation were established by the National method is the “forward cross”...

  • Page 271: Traction Grades

    SERVICING AND MAINTENANCE STORING THE VEHICLE significantly from the norm due to varia- its ability to dissipate heat, when tested tions in driving habits, service practices, under controlled conditions on a speci- If the vehicle should remain stationary for more and differences in road characteristics fied indoor laboratory test wheel.

  • Page 272: Bodywork

    SERVICING AND MAINTENANCE BODYWORK Cover the vehicle with an appropriate cover NOTE:  taking care not to damage the painted surface When the vehicle has not been started or driven Protection From Atmospheric Agents by dragging across dirty surfaces. Do not use for at least 30 days, an Extended Park Start plastic sheeting which will not allow the evapo- Procedure is required to start the vehicle.

  • Page 273: Body And Underbody Maintenance

    SERVICING AND MAINTENANCE What Causes Corrosion? To minimize the possibility of scratching the CAUTION! lenses and reducing light output, avoid wiping Corrosion is the result of deterioration or with a dry cloth. To remove road dirt, wash with Do not use abrasive or strong cleaning mate- ...

  • Page 274: Interiors

    SERVICING AND MAINTENANCE INTERIORS If your vehicle is damaged due to a collision or  WARNING! similar cause that destroys the paint and Seats And Fabric Parts protective coating, have your vehicle repaired A frayed or torn belt could rip apart in a as soon as possible.

  • Page 275: Leather Parts

    SERVICING AND MAINTENANCE Cleaning Plastic Instrument Cluster Lenses soaking your leather upholstery with any liquid. Glass Surfaces Please do not use polishes, oils, cleaning fluids, The lenses in front of the instruments in this All glass surfaces should be cleaned on a solvents, detergents, or ammonia-based vehicle are molded in clear plastic.

  • Page 276: Technical Specifications

    TECHNICAL SPECIFICATIONS IDENTIFICATION DATA BRAKE SYSTEM Vehicle Identification Number Your vehicle is equipped with dual hydraulic brake systems. If either of the two hydraulic The Vehicle Identification Number (VIN) is systems loses normal capability, the remaining stamped on the plate illustrated , located on the system will still function.

  • Page 277: Wheel And Tire Torque Specifications

    TECHNICAL SPECIFICATIONS WHEEL AND TIRE TORQUE SPECIFICATIONS After 25 miles (40 km) check the lug nut/bolt torque to be sure that all the lug nuts/bolts are Proper lug nut/bolt torque is very important to properly seated against the wheel. ensure that the wheel is properly mounted to WARNING! the vehicle.

  • Page 278: Reformulated Gasoline

    TECHNICAL SPECIFICATIONS While operating on gasoline with an octane Materials Added To Fuel Gasoline/Oxygenate Blends number of 87, hearing a light knocking sound Besides using unleaded gasoline with the Some fuel suppliers blend unleaded gasoline from the engine is not a cause for concern. proper octane rating, gasolines that contain with oxygenates such as ethanol.

  • Page 279: Do Not Use E-85 In Non-Flex Fuel Vehicles

    TECHNICAL SPECIFICATIONS Do Not Use E-85 In Non-Flex Fuel Vehicles CNG And LP Fuel System Modifications gasoline may not be indicated on the gasoline pump; therefore, you should ask your gasoline Non-Flex Fuel Vehicles (FFV) are compatible Modifications that allow the engine to run on retailer whether the gasoline contains MMT.

  • Page 280: Carbon Monoxide Warnings

    TECHNICAL SPECIFICATIONS Carbon Monoxide Warnings CAUTION! (Continued) WARNING! (Continued) WARNING! The use of fuel additives, which are now Guard against carbon monoxide with proper   being sold as octane enhancers, is not maintenance. Have the exhaust system Carbon monoxide (CO) in exhaust gases is recommended.

  • Page 281: Fluid Capacities

    TECHNICAL SPECIFICATIONS FLUID CAPACITIES Metric Fuel (Approximate) 1.3L Turbo Engine 12.7 Gallons 48 Liters Engine Oil With Filter 1.3L Turbo Engine (SAE 0W-30 SN PLUS Synthetic, API Certified) 4.8 Quarts 4.5 Liters Cooling System * 1.3L Turbo Engine (Mopar Antifreeze/Engine Coolant 10 Year/150,000 Mile Formula) 8.8 Quarts 8.3 Liters * Includes heater and coolant recovery bottle filled to MAX level.

  • Page 282: Chassis

    TECHNICAL SPECIFICATIONS Chassis Component Fluid, Lubricant, or Genuine Part Automatic Transmission Use only Mopar ZF 8&9 Speed ATF Automatic Transmission Fluid, or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. Power Transfer Unit (PTU) We recommended you use Mopar Front Axle/PTU Synthetic Axle Lubricant SAE 75W-90 (API GL-5).

  • Page 283: Multimedia

    MULTIMEDIA CYBERSECURITY NOTE: WARNING! FCA US LLC or your dealer may contact you  Your vehicle may be a connected vehicle and It is not possible to know or to predict all of  directly regarding software updates. may be equipped with both wired and wireless the possible outcomes if your vehicle’s networks.

  • Page 284: Uconnect Settings

    MULTIMEDIA UCONNECT SETTINGS NOTE: or press the X button on the touchscreen to close out of the settings screen. Pressing the Up Only one touchscreen area may be selected at  Customer Programmable Features — or Down Arrow button on the right side of the a time.
  • Page 285 MULTIMEDIA Display After pressing the Display button on the touchscreen, the following settings will be available: Setting Name Selectable Options Display Mode Auto Manual NOTE: When Auto or Manual is selected for the Display Mode, the usage of the Parade Mode feature will cause the radio to activate the Display Brightness control even though the headlights are on.
  • Page 286 MULTIMEDIA Custom  When “Custom” is selected, you may select each unit of measurement independently displayed in the instrument cluster display, and navigation system. Setting Name Selectable Options Distance Fuel Consumption L/100 km km/L Pressure Temperature °C °F Voice After pressing the Voice button on the touchscreen, the following settings will be available: Setting Name Selectable Options Voice Response Length...
  • Page 287 MULTIMEDIA Setting Name Selectable Options Time Format 12 hrs 24 hrs NOTE: Within the “Set Time and Format” setting, press the corresponding Arrow buttons on the touchscreen to adjust to the correct time. Show Time In Status Set Date (MM/DD/YY) NOTE: This feature allows you to set the date, month, and year using the + and - buttons.
  • Page 288 MULTIMEDIA Setting Name Selectable Options Brake Control Sensitivity — If Near Equipped NOTE: The “Full Brake Control System Sensitivity” setting determines at what relative distance the vehicle directly in front of you needs to be at before the system warns you of a possible collision, based on the option selected. “Far” gives you the most amount of reaction time, whereas “Near” gives you the least amount of reaction time, based on the distance between the two vehicles.
  • Page 289 MULTIMEDIA Setting Name Selectable Options Blind Spot Assist — If Equipped Lights Lights + Chime NOTE: When the “Blind Spot Assist” feature is selected, the Blind Spot Monitor (BSM) system is activated and shows a visual alert in the outside mirrors, or it shows a visual alert in the outside mirrors and sounds an audible alert when the turn signal is on.
  • Page 290 MULTIMEDIA Mirrors — If Equipped After pressing the Mirrors button on the touchscreen, the following settings will be available: Setting Name Selectable Options Auto Folding Side Mirrors Brakes After pressing the Brakes button on the touchscreen, the following settings will be available: Setting Name Selectable Options Brake Service...
  • Page 291 MULTIMEDIA Setting Name Selectable Options High Beam Control — If Equipped Daytime Running Lights NOTE: When the “Daytime Running Lights” feature is selected, the daytime running lights can be turned On or Off. This feature is only available if allowed by law in the country of the vehicle purchase.
  • Page 292 MULTIMEDIA Setting Name Selectable Options Horn With Lock — If Equipped 1st Press 2nd Press Horn With Remote Start — If Equipped Keyless Entry — If Equipped NOTE: This features allows you to lock and unlock the vehicle’s door(s) without having to press the key fob lock or unlock buttons. Remote Door Unlock —...
  • Page 293 MULTIMEDIA Auto-On Comfort — If Equipped After pressing the Auto-On Comfort button on the touchscreen, the following settings will be available: Setting Name Selectable Options Auto-On Driver Heated Seat & Remote Start All Starts Steering Wheel With Vehicle Start — If Equipped NOTE: When this feature is selected the driver’s heated seat and heated steering wheel will automatically turn ON when temperatures are below 40°F (4.4°C).
  • Page 294 MULTIMEDIA Setting Name Selectable Options Loudness — If Equipped NOTE: This feature improves sound quality at lower volumes when enabled. Auto Play Auto-On Radio Recall Last NOTE: The radio automatically turns on when vehicle is in ON/RUN or will recall whether it was on or off at last ignition OFF. Engine Off Options After pressing the Engine Off Options button on the touchscreen, the following settings will be available: Setting Name...
  • Page 295 MULTIMEDIA Phone/Bluetooth® WARNING! Any voice commanded system should be used only in safe driving conditions following all applicable laws. Your attention should be focused on safely operating the vehicle. Failure to do so may result in a collision causing serious injury or death. After pressing the Phone/Bluetooth®...
  • Page 296 MULTIMEDIA SiriusXM® Setup — If Equipped After pressing the SiriusXM® Setup button on the touchscreen, the following settings will be available: Setting Name Selectable Options Tune Start NOTE: The “Tune Start” feature begins playing the current song from the beginning when you tune to a music channel using one of the 12 presets, so you can enjoy the complete song.
  • Page 297 MULTIMEDIA Restore Settings To Default After pressing the Restore Settings button on the touchscreen, the following settings will be available: Setting Name Selectable Options Restore Settings Cancel NOTE: When this feature is selected, it will reset Display, Clock, Audio, and Radio Settings to their default. Clear Personal Data After pressing the Clear Personal Data settings button on the touchscreen, the following settings will be available: Setting Name...

  • Page 298: Safety And General Information

    MULTIMEDIA SAFETY AND GENERAL INFORMATION Stop use immediately if a problem occurs. NOTE:  Failure to do so may cause injury or damage to Many features of this system are speed depen- Safety Guidelines the product. Return it to an authorized dealer dent.

  • Page 299: Uconnect 4/4 Nav With 7-Inch Display

    MULTIMEDIA UCONNECT 4/4 NAV WITH 7-INCH Care And Maintenance 2. Media Touchscreen Press the Media button on the touch- DISPLAY screen to access media sources such as: Do not press the touchscreen with any hard or  USB Device, AUX, and Bluetooth® as long Introduction sharp objects (pen, USB stick, jewelry, etc.), as the requested media is present.

  • Page 300: Radio Mode

    MULTIMEDIA 7. Trip 2. Press and hold, then drag the selected App The radio is equipped with the following modes: to replace an existing shortcut in the main  Press the Trip button on the display to view menu bar. the car’s trip information.
  • Page 301 MULTIMEDIA Tune/Scroll Control after passing through the entire band two times, Direct Tune the radio will stop at the station where it began. When the audio system is turned on, the sound Press the Tune button on the touchscreen will be set at the same volume level as last Fast Seek Up located at the bottom of the radio screen.
  • Page 302 MULTIMEDIA Preset Selection From List SiriusXM® All Access Package Setting The Presets The Presets are available for all Radio Modes, A Preset can be selected by pressing any of the All satellite radio equipped vehicles come with a and are activated by pressing any of the six listed Presets, or by pushing the ENTER/ one year trial to the SiriusXM®...
  • Page 303 MULTIMEDIA SiriusXM® services require subscriptions, sold If the screen shows Acquiring Signal, you might When in Satellite mode: separately after the 12-month trial included with the have to change the vehicle’s position in order to The SXM button on the touchscreen is high- ...
  • Page 304 MULTIMEDIA Forward The maximum number of favorites that can be Replay stored in the Radio is 50. The replay function provides a means to store Each press of the FW button on the touchscreen and replay up to 22 minutes of music audio and forwards the content in steps of five seconds.
  • Page 305 MULTIMEDIA Channel List selected, the Radio tunes to the station stored Alert Settings in the Preset, and returns to the main Radio Press the Channel List, or Genre, to display all Press the Alert Setting tab at the top of the screen.
  • Page 306 MULTIMEDIA Remove Selection Balance & Fade Equalizer — If Equipped Press the Remove Selection tab at the top of the screen. Press the Delete All button on the touch- screen to delete all of the Selections or press the trash can icon next to the Selection to be deleted.
  • Page 307 MULTIMEDIA AUX Volume Offset Auto Play Auto On Radio Press the AUX Volume Offset button on the touchscreen to activate the AUX Volume Offset screen. The AUX Volume Offset is adjusted by pressing of the + and – buttons. This alters the AUX input audio volume.

  • Page 308: Media Mode

    MULTIMEDIA Media Mode side of the screen. The center of the browse Info window shows items and it’s sub-functions, Press the Info button on the touchscreen to USB/iPod® Mode which can be scrolled by pressing the Up and display the current track information. Press the Overview Down buttons to the right.
  • Page 309 MULTIMEDIA AUX Mode Media Mode Overview Press the Media button on the touchscreen to select the desired audio source: AUX. AUX (Auxiliary Mode) is entered by inserting an AUX device using a cable with a 3.5 mm audio Audio jack into the AUX port or by pressing the AUX Refer to Radio Mode in this section for adjusting button on the left side of the display.
  • Page 310 MULTIMEDIA Tracks Android Auto™ is a feature of your Uconnect NOTE: system, and your Android™ 5.0 (Lollipop), or Be sure to use the factory-provided USB cable If the Bluetooth® device supports this feature, higher, powered smartphone with a data plan, that came with your phone, as aftermarket press the Tracks button on the touchscreen to that allows you to project your smartphone and...
  • Page 311 MULTIMEDIA NOTE: You can also touch the Navigation icon in NOTE: To use Android Auto™, make sure you are in an Android Auto™ to access Google Maps™. If you are using the built-in Uconnect navigation area with cellular coverage. Android Auto™ may system, and you try and start a new route using NOTE: use cellular data and your cellular coverage is...
  • Page 312 MULTIMEDIA For further information on the navigation NOTE: function, please refer to https:// To see the metadata for the music playing support.google.com/android https:// through Android Auto™, select the Uconnect support.google.com/androidauto/. System’s media screen. For further information refer to https:// Android Auto™ Music support.google.com/androidauto.
  • Page 313 MULTIMEDIA Apple CarPlay® Integration NOTE: Feature availability depends on your carrier and mobile phone manufacturer. Some Apple CarPlay® features may or may not be available in every region and/or language. Uconnect works seamlessly with Apple CarPlay®, the smarter, more secure way to use your iPhone®...
  • Page 314 MULTIMEDIA Apple CarPlay® Phone Apple CarPlay® Maps With Apple CarPlay®, push and hold To use your Apple® Maps for naviga- the Voice Recognition button on the tion on your Uconnect system, launch steering wheel to activate a Siri voice Apple CarPlay®, and push and hold the recognition session.
  • Page 315 MULTIMEDIA If you are using the built-in Uconnect navigation Apple CarPlay® Apps AutoShow  system, and you try and start a new route using To use a compatible app with Apple CarPlay®, AutoShow is a feature of the Uconnect system Apple CarPlay®, via voice or any other method, you must have the compatible app downloaded, that automatically launches and displays...

  • Page 316: Phone Mode

    MULTIMEDIA Multiple Devices Connecting To The Uconnect Phone Mode 14 —Mobile Phone Battery Life System 15 — Do Not Disturb Overview 16 — Reply with Text Message It is possible to have multiple devices * — Conference Call feature only available on GSM connected to the Uconnect system.
  • Page 317 MULTIMEDIA Redialing last dialed numbers (“Redial”). Listen to music on your Bluetooth® device via   WARNING! the touchscreen. Calling back the last incoming call number  ALWAYS drive safely with your hands on the (“Call Back”). Pairing up to 10 phones/audio devices for easy ...
  • Page 318 MULTIMEDIA Uconnect Phone Button For each feature explanation in this section, Phone Operation  only the compound command form of the voice The Uconnect Phone button on your steering Operation command is given. You can also break the wheel is used to get into the phone mode and Voice commands can be used to operate the commands into parts and say each part of the make calls, show recent, incoming, outgoing...
  • Page 319 MULTIMEDIA The system handles multiple inputs in the same Cancel Command NOTE: phrase or sentence such as “make a phone At any prompt, after the beep, you can say You must have Bluetooth® enabled on your  call” and “to Kelly Smith.” For multiple inputs in “Cancel”...
  • Page 320 MULTIMEDIA 4. Search for available devices on your select Uconnect and accept the connec- audio device Bluetooth® screen, and the Bluetooth® enabled mobile phone. tion request. Uconnect system will reconnect to the Bluetooth® device. Press the Settings button on your mobile ...
  • Page 321 MULTIMEDIA NOTE: 5. Search for available devices on your Connecting To A Particular Mobile Phone Or Audio Device After Pairing For phones which are not made a favorite, the Bluetooth® enabled audio device. When phone priority is determined by the order in which prompted on the device, enter the PIN Uconnect Phone will automatically connect to shown on the Uconnect screen.
  • Page 322 MULTIMEDIA 3. Select the Phone or the Audio Device that number to display the options pop-up. In the Making A Phone Or Audio Device A Favorite you want to disconnect. pop-up select “Add to Favorites.” 1. Press the Phone button on the touch- 4.
  • Page 323 MULTIMEDIA A maximum of 5,000 contact names with four Phone Call Features Dial By Saying A Number  numbers per contact will be downloaded and The following features can be accessed through 1. Push the VR button on your steering wheel updated every time a phone is connected to the Uconnect Phone if the feature(s) are avail- to begin.
  • Page 324 MULTIMEDIA If your vehicle has two or three buttons on the Call Controls Answer Or Ignore An Incoming Call — No Call Currently In Progress steering wheel (VR, Phone Send, and Phone The touchscreen allows you to control the End) push the VR button to send a touch-tone When you receive a call on your mobile phone, following call features: and say “Send 1234#”...
  • Page 325 MULTIMEDIA Do Not Disturb NOTE: Join Calls With Do Not Disturb, you can disable notifica- When two calls are in progress (one active and Reply with text message is not compatible with  tions from incoming calls and texts, allowing one on hold), press the Join Calls button on the iPhones®.
  • Page 326 MULTIMEDIA Call Continuation Advanced Phone Connectivity Things You Should Know About Your Uconnect Phone Call continuation is the progression of a phone Transfer Call To And From Mobile Phone call on the Uconnect Phone after the vehicle Voice Command The Uconnect Phone allows ongoing calls to be ignition has been switched to OFF.
  • Page 327 MULTIMEDIA Far End Audio Performance Bluetooth® Communication Link WARNING! Audio quality is maximized under: Mobile phones have been found to lose connec- ALWAYS drive safely with your hands on the tion to the Uconnect Phone. When this happens, Low-To-Medium Blower Setting ...

  • Page 328: Navigation Mode - If Equipped

    MULTIMEDIA Navigation Mode — If Equipped Press My Places to select from a list of saved them in distance. The distance to the next direc-  destinations, including the saved Home, Work, tion is displayed at the top of the screen, and Navigation Main Menu and Recent destinations.
  • Page 329 MULTIMEDIA NOTE: Change Route Type Avoid Blocked Road Pressing the More button, the three dot icon, next Press this button on the touchscreen to change Press this button on the touchscreen to select a to the Navigate button, the steering wheel icon, the current routes type to one of the below road you wish to avoid on your route that is brings up the options to add the destination to...
  • Page 330 MULTIMEDIA Add To My Routes Home Parking From the Navigation Main Menu, press the Press this button on the touchscreen to add the Press this button on the touchscreen to navi- Parking button on the touchscreen to bring up a current route to the list of save routes in the My gate to the saved Home destination.

  • Page 331: Steering Wheel Audio Controls

    MULTIMEDIA STEERING WHEEL AUDIO CONTROLS Appearance when a faster route is available, which type of route it should plan when setting one (i.e. fastest, Press this button on the touchscreen to adjust The remote sound system controls are located shortest, most eco-friendly, or to avoid interstate the appearance settings of the navigation at the rear of the steering wheel.

  • Page 332: Radio Operation

    MULTIMEDIA USB/MEDIA PLAYER CONTROL — IF The left-hand control is a rocker-type switch with a push-button in the center. The function of the EQUIPPED left-hand control is different depending on which mode you are in. Located below the heating ventilation and air The following describes the left-hand control conditioning controls is the front USB ports.

  • Page 333: Regulatory And Safety Information

    MULTIMEDIA Regulatory And Safety Information The following regulatory statement applies to all La operación de este equipo está sujeta a las Radio Frequency (RF) devices equipped in this siguientes dos condiciones: USA/CANADA vehicle: 1. es posible que este equipo o dispositivo no Exposure to Radio Frequency Radiation This device complies with Part 15 of the FCC cause interferencia perjudicial y...

  • Page 334: Uconnect Voice Recognition Quick Tips

    MULTIMEDIA If this equipment does cause harmful interfer- Get Started 5. You can interrupt the help message or  ence to radio or television reception, which can system prompts by pushing the VR or All you need to control your Uconnect system be determined by turning the equipment off Phone button and saying a Voice with your voice are the buttons on your steering...

  • Page 335: Basic Voice Commands

    MULTIMEDIA Basic Voice Commands Radio Media The basic Voice Commands below can be given Use your voice to quickly get to the AM, FM or Uconnect offers connections via USB and at any point while using your Uconnect system. SiriusXM® Satellite Radio stations you would Bluetooth®.

  • Page 336: Phone

    MULTIMEDIA TIP: Push the VR Button on the steering wheel. After Navigation (4 NAV) — If Equipped Press the Browse button on the touchscreen to the beep, say one of the following commands: The Uconnect navigation feature helps you save see all of the music on your USB device.

  • Page 337: Siri® Eyes Free - If Equipped

    MULTIMEDIA Siri® Eyes Free — If Equipped Using Do Not Disturb Auto reply with text message is only available  on phones that support Bluetooth® Messaging Siri lets you use your voice to send text With Do Not Disturb, you can disable notifica- Access Profile (MAP).

  • Page 338: Apple Carplay® - If Equipped

    MULTIMEDIA natural voice commands, to use a list of your Apple CarPlay® — If Equipped Siri, which recognizes natural voice commands smartphone’s features: to use a list of your iPhone’s® features: NOTE: Maps Phone   Feature availability depends on your carrier and mobile phone manufacturer.

  • Page 339: General Information

    MULTIMEDIA General Information 2. l'utilisateur de l'appareil doit accepter tout Additional Information brouillage radioélectrique subi, même si le The following regulatory statement applies to all © 2019 FCA US LLC. All rights reserved. Mopar brouillage est susceptible d'en comprom- Radio Frequency (RF) devices equipped in this and Uconnect are registered trademarks and ettre le fonctionnement.

  • Page 340: Customer Assistance

    CUSTOMER ASSISTANCE SUGGESTIONS FOR OBTAINING SERVICE Be Reasonable With Requests This is why you should always talk to an autho- rized dealer service manager first. Most matters FOR YOUR VEHICLE If you list a number of items and you must have can be resolved with this process.

  • Page 341: Fca Us Llc Customer Center

    CUSTOMER ASSISTANCE FCA US LLC Customer Center Customer Assistance For The Hearing Or vehicle delivery date. If you have any questions about the service contract, call the manufac- Speech Impaired (TDD/TTY) P.O. Box 21–8004 turer's Service Contract National Customer To assist customers who have hearing difficul- Auburn Hills, MI 48321–8004 Hotline at 1-800-521-9922 (Canadian resi- ties, the manufacturer has installed special...

  • Page 342: Warranty Information

    CUSTOMER ASSISTANCE REPORTING SAFETY DEFECTS To contact NHTSA, you may call the WARNING! Vehicle Safety Hotline toll free at In The 50 United States And Washington, D.C. Engine exhaust (internal combustion 1-888-327-4236 (TTY: 1-800-424-9153); engines only), some of its constituents, and If you believe that your vehicle has a or go to http://www.safercar.gov;...

  • Page 343: Publication Order Forms

    CUSTOMER ASSISTANCE PUBLICATION ORDER FORMS Diagnostic Procedure Manuals Owner's Manuals Diagnostic Procedure Manuals are filled with These Owner's Manuals have been prepared To order the following manuals, you may use diagrams, charts and detailed illustrations. with the assistance of service and engineering either the website or the phone numbers listed These practical manuals make it easy for specialists to acquaint you with specific FCA US...

  • Page 344: Index

    INDEX ........53 ....148 Air Conditioning Automatic Transmission ........274 ......55 ......251 About Your Brakes Air Conditioning Filter Adding Fluid ... 160 .....54 ...... 251 Adaptive Cruise Control (ACC) (Cruise Control) Air Conditioning, Operating Tips Fluid And Filter Change ....247 ..........242 ........
  • Page 345 B-Pillar Location ........256 Child Restraints Cooling System ........246 Brake Assist System ........91 Booster Seats ........129 Adding Coolant (Antifreeze) ....247 Brake Control System, Electronic ....91 Child Seat Installation ......136 Coolant Level ........249 Brake Fluid .......... 280 How To Stow An unused ALR Seat Belt ...134 Cooling Capacity ......
  • Page 346 ......139 Dipsticks Emergency, In Case Of Exhaust System ........239 .....199 ........35 Oil (Engine) Hazard Warning Flasher Exterior Lighting ......228 ........216 .........35 Disabled Vehicle Towing Jacking Exterior Lights ........223 Disposal Jump Starting ....248 ........225 Antifreeze (Engine Coolant) Overheating ......
  • Page 347 Fuel ........... 275 Adding ........... 186 Hazard Ignition ..........12 Additives ........276 Driving Through Flowing, Rising, Or Shallow Switch ..........12 Clean Air ......... 276 Standing Water ........197 Inside Rearview Mirror ....... 32 Ethanol .......... 276 Hazard Warning Flashers ......199 Instrument Cluster Gasoline...
  • Page 348 ..........141 Keyless Enter-N-Go Lights Locks ......... 20 ...........140 ......... 19 Enter The Trunk Air Bag Automatic Door ....20 ......35 ......105 Lock The Vehicle’s Doors Automatic Headlights Low Tire Pressure System ........20 ........79 ........243 Passive Entry Brake Warning Lubrication, Body ....20 ........
  • Page 349 Overheating, Engine ........225 Rear Window Defroster ......42 New Vehicle Break-In Period ....... 144 Owner’s Manual (Operator Manual) ....7 Rear Wiper/Washer ........42 Recreational Towing ....... 196 Reformulated Gasoline ......276 Occupant Restraints ........ 108 Paint Care ..........270 Refrigerant .......... 243 Octane Rating, Gasoline (Fuel) ....
  • Page 350 ...........25 ........264 Seats Spare Tires ...... 140 ........25 ......... 279 Safety Checks Inside Vehicle Adjustment Spark Plugs ....141 ........25 Safety Checks Outside Vehicle Rear Folding Specifications ......340 .......25 ........ 279 Safety Defects, Reporting Seatback Release Fuel (Gasoline) ......252 ..........25 ..........
  • Page 351 Sway Control, Trailer ........ 190 Load Capacity ........256 Trailer Towing ........189 System, Remote Starting ......13 Pressure Monitoring System Cooling System Tips ......195 (TPMS) ........84 Hitches .......... 191 Quality Grading ........268 Minimum Requirements ....192 Telescoping Steering Column ......31 Radial ..........261 Trailer And Tongue Weight...
  • Page 352 ....317 ........322 Uconnect Phone Receiving A Call ........322 ......199 Answer Or Ignore An Incoming Call — Recent Calls Warning Flashers, Hazard ....322 ......321 ... 82 Call Currently In Progress To Remove A Favorite Warning Lights (Instrument Cluster Descriptions) ......
  • Page 355 It is always the driver’s responsibility to comply with all local laws. This Owner’s Manual has been prepared to help you get acquainted with your new FIAT brand vehicle and to provide a convenient reference source for ®...
  • Page 356 (U.S.) or fiatcanada.com/en (Canada) ©2019 FCA US LLC. All Rights Reserved. FIAT is a registered trademark of FCA Group Marketing S.p.A., used under license by FCA US LLC. App Store is a registered trademark of Apple Inc. Google Play Store is a registered trademark of Google.

Table of Contents