Table of Contents

Advertisement

FIAT
500X
®
2 0 1 7
O W N E R ' S M A N U A L

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 500X 2017 and is the answer not in the manual?

Questions and answers

Summary of Contents for Fiat 500X 2017

  • Page 1 FIAT 500X ® 2 0 1 7 O W N E R ’ S M A N U A L...
  • Page 2 VEHICLES SOLD IN CANADA This manual illustrates and describes the operation of With respect to any Vehicles Sold in Canada, the name FCA features and equipment that are either standard or op- US LLC shall be deemed to be deleted and the name FCA tional on this vehicle.
  • Page 3: Introduction 3

    TABLE OF CONTENTS SECTION PAGE INTRODUCTION ............. . . 3 CUSTOMER ASSISTANCE .
  • Page 5: Table Of Contents

    INTRODUCTION CONTENTS INTRODUCTION ..... . .4 VEHICLE MODIFICATIONS/ALTERATIONS . . .6 HOW TO USE THIS MANUAL ... . .4 ROLLOVER WARNING .
  • Page 6: Introduction

    4 INTRODUCTION INTRODUCTION NOTE: After reviewing the owner information, it should be stored in the vehicle for convenient refer- Congratulations on selecting your new vehicle. Be encing and remain with the vehicle when sold. assured that it represents precision workmanship, dis- tinctive styling, and high quality.
  • Page 7: Warnings And Cautions

    INTRODUCTION 5 WARNINGS AND CAUTIONS to your vehicle. If you do not read this entire Owner’s Manual, you may miss important information. Observe This Owner’s Manual contains WARNINGS against all Warnings and Cautions. operating procedures that could result in a collision, bodily injury and/or death.
  • Page 8: Vehicle Modifications/Alterations

    6 INTRODUCTION VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death. ROLLOVER WARNING Utility vehicles have a significantly higher rollover rate than other types of vehicles.
  • Page 9 IF YOU NEED ASSISTANCE ....8 ▫ FIAT Customer Center ....9 ▫...
  • Page 10: Suggestions For Obtaining Service For Your Vehicle

    8 CUSTOMER ASSISTANCE SUGGESTIONS FOR OBTAINING SERVICE FOR IF YOU NEED ASSISTANCE YOUR VEHICLE The manufacturer and its authorized dealer are vitally interested in your satisfaction. We want you to be Prepare For The Appointment happy with our products and services. If you are having warranty work done, be sure to bring the right papers with you, as well as your warranty Warranty service must be done by an authorized dealer.
  • Page 11: Fiat Customer Center

    Customer Service Chrysler International Services LLC P.O. Box 21–8004 Auburn Hills, MI 48321–8004 P.O. Box 191857 Phone: 1-888-242-6342 San Juan 00919-1857 FIAT Canada Customer Center Tel.: (787) 782-5757 P.O. Box 1621 Fax: (787) 782-3345 Windsor, Ontario N9A 4H6 Phone: (800) 465-2001 English / (800) 387-9983 French...
  • Page 12: Customer Assistance For The Hearing Or Speech Impaired (Tdd/Tty)

    10 CUSTOMER ASSISTANCE Customer Assistance For The Hearing Or the manufacturer’s Service Contract National Customer Speech Impaired (TDD/TTY) Hotline at 1-800-521-9922 (Canadian residents, call (800) 465-2001 English / (800) 387-9983 French). To assist customers who have hearing difficulties, the manufacturer has installed special TDD (Telecommuni- The manufacturer will not stand behind any service cation Devices for the Deaf) equipment at its customer contract that is not the manufacturer’s service contract.
  • Page 13: Warranty Information

    CUSTOMER ASSISTANCE 11 If NHTSA receives similar complaints, it may open WARNING! an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and Engine exhaust (internal combustion engines only), remedy campaign.
  • Page 14: Publication Order Forms

    12 CUSTOMER ASSISTANCE PUBLICATION ORDER FORMS Owner’s Manuals To order the following manuals, you may use either the These Owner’s Manuals have been prepared with the website or the phone numbers listed below. Visa, Mas- assistance of service and engineering specialists to tercard, American Express, and Discover orders are acquaint you with specific FCA US LLC vehicles.
  • Page 15 GRAPHICAL TABLE OF CONTENTS CONTENTS FRONT VIEW ......14 INTERIOR......17 REAR VIEW .
  • Page 16: Front View

    14 GRAPHICAL TABLE OF CONTENTS FRONT VIEW Front View 1 — Engine Compartment 4 — Outside Mirrors 2 — Headlights 5 — Doors 3 — Windshield 6 — Wheels...
  • Page 17: Rear View

    GRAPHICAL TABLE OF CONTENTS 15 REAR VIEW Rear View 1 — Rear Lights 2 — Rear Windshield Wiper 3 — Liftgate...
  • Page 18: Instrument Panel

    16 GRAPHICAL TABLE OF CONTENTS INSTRUMENT PANEL Instrument Panel 1 — Air Vents 7 — Upper Switch Bank 13 — Lower Switch Bank 2 — Multifunction Lever 8 — Upper Storage Compartment 14 — Driver Side Knee Air Bag 3 — Instrument Cluster 9 —...
  • Page 19: Interior

    GRAPHICAL TABLE OF CONTENTS 17 INTERIOR Interior Features 1 — Power Window Switches 6 — Seats 2 — Headlight Switch 7 — Climate Controls 3 — Instrument Cluster 8 — Transmission Gear Selector (Automatic/Manual Options) 4 — Uconnect Radio 9 — Electronic Speed Controls 5 —...
  • Page 21 GETTING TO KNOW YOUR VEHICLE CONTENTS ▫ To Exit Remote Start Mode Without Driving The KEYS .......23 Vehicle .
  • Page 22 20 GETTING TO KNOW YOUR VEHICLE ▫ Inside Day/Night Mirror ....57 DOORS ......36 ▫...
  • Page 23 GETTING TO KNOW YOUR VEHICLE 21 ▫ High Beams ......69 ▫ Operating Tips ..... . .95 ▫...
  • Page 24 22 GETTING TO KNOW YOUR VEHICLE ▫ Cargo Area Features ....107 ▫ Ashtray — If Equipped ....115 ▫...
  • Page 25: Keys

    GETTING TO KNOW YOUR VEHICLE 23 KEYS Electronic Key Fob On versions equipped with Keyless Enter-N-Go, the car is equipped with an electronic key fob. The key fob with Remote Control contains a Remote Keyless Entry key fob. The Remote Keyless Entry system allows you to lock or unlock the doors and liftgate or activate the Panic Alarm from distances up to approximately 66 ft (20 m) using a handheld key fob.
  • Page 26: Key Fob Operation

    24 GETTING TO KNOW YOUR VEHICLE Key Fob Operation Unlocking Doors And Liftgate The driver’s door may be unlocked by inserting the vehicle key into the exterior driver’s door lock cylinder. To unlock all the doors, push the interior power door unlock button on the door panel.
  • Page 27: Replacing The Battery In The Key Fob With Remote Control

    GETTING TO KNOW YOUR VEHICLE 25 Locking Doors And Liftgate NOTE: • The current setting can be changed within the instru- The doors may be locked by inserting the vehicle key ment cluster display menu or in the Uconnect Set- into the exterior driver’s door lock cylinder.
  • Page 28: Request For Additional Keys

    26 GETTING TO KNOW YOUR VEHICLE 2. Separating key fob halves requires screw removal (if deterioration. If you touch a battery, clean it with equipped) and gently prying the two halves of the rubbing alcohol. key fob apart with the emergency key. Make sure not to damage the seal during removal.
  • Page 29: General Information

    GETTING TO KNOW YOUR VEHICLE 27 2. This device must accept any interference received, CAUTION! including interference that may cause undesired • Always remove the key fobs from the vehicle and operation. lock all doors when leaving the vehicle unat- NOTE: Changes or modifications not expressly ap- tended.
  • Page 30 28 GETTING TO KNOW YOUR VEHICLE NOTE: If the ignition switch does not change with the The Keyless Push Button Ignition can be placed in the push of a button, the key fob may have a low or dead following positions: battery.
  • Page 31: Remote Starting System - If Equipped

    GETTING TO KNOW YOUR VEHICLE 29 General Information WARNING! (Continued) The following regulatory statement applies to all radio • Allowing children to be in a vehicle unattended is frequency (RF) devices equipped in this vehicle: dangerous for a number of reasons. A child or others could be seriously or fatally injured.
  • Page 32: Remote Start Cancel Message - If Equipped

    30 GETTING TO KNOW YOUR VEHICLE The Remote Starting System also activates the Climate The message will stay active until the ignition is placed Control and (if equipped) the optional heated seats and in the ON/RUN position. optional heated steering wheel depending on tempera- How To Use Remote Start tures outside and inside the car.
  • Page 33: To Enter Remote Start Mode

    GETTING TO KNOW YOUR VEHICLE 31 • For security, power window operation is disabled WARNING! when the vehicle is in the remote start mode. • Do not start or run an engine in a closed garage or To Exit Remote Start Mode Without Driving The confined area.
  • Page 34: Remote Start Comfort Systems - If Equipped

    32 GETTING TO KNOW YOUR VEHICLE Remote Start Comfort Systems — If Equipped This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). When Remote Start is activated, the heated steering Operation is subject to the following two conditions: wheel and driver heated seat features will automati- cally turn on in cold weather.
  • Page 35: General Information

    GETTING TO KNOW YOUR VEHICLE 33 operate the vehicle. The system will not allow the General Information engine to crank if an invalid key fob tries to start the The following regulatory statement applies to all radio engine. frequency (RF) devices equipped in this vehicle: After placing the ignition to the ON/RUN position, if This device complies with Part 15 of the FCC Rules and there is a problem with the system, the vehicle security...
  • Page 36: To Arm The System

    34 GETTING TO KNOW YOUR VEHICLE If something triggers the alarm, the vehicle security To Arm The System alarm will provide the following audible and visible Follow these steps to arm the vehicle security alarm: signals: 1. Make sure the vehicles ignition is cycled to the •...
  • Page 37: To Disarm The System

    GETTING TO KNOW YOUR VEHICLE 35 • Cycle the vehicle ignition system out of the STOP/ NOTE: OFF/LOCK position. • If a second chime is heard after approximately four – For vehicles equipped with Keyless Enter-N-Go, seconds from arming the alarm, disarm the alarm push the Keyless Enter-N-Go START/STOP but- by pushing the unlock button.
  • Page 38: Disabling

    36 GETTING TO KNOW YOUR VEHICLE Disabling To completely disable the alarm (e.g. in the case of long inactivity of the car), lock the doors by turning the vehicle key in the exterior door lock cylinder. NOTE: If the batteries in the key fob discharge in the event of a failure to the system, or to switch off the alarm, place the ignition in the ON/RUN position.
  • Page 39: Central Lock/Unlock

    GETTING TO KNOW YOUR VEHICLE 37 WARNING! CAUTION! • When leaving the vehicle, always remove the key An unlocked car is an invitation. Always remove fob from the vehicle and lock your vehicle. the key from the ignition and lock all doors when •...
  • Page 40: Keyless Enter-N-Go

    38 GETTING TO KNOW YOUR VEHICLE door is open, and the ignition is in the ON/RUN position, a chime will sound as a reminder to remove the key. NOTE: If all of the doors are closed properly, the door locks will lock automatically when the vehicle’s speed exceeds 12 mph (20 km/h).
  • Page 41 GETTING TO KNOW YOUR VEHICLE 39 • If the vehicle is unlocked by the Passive Entry Door Handle, and no door goes ajar within 60 seconds, the vehicle will re-lock and if equipped, the security alarm will arm. • The key fob may not be able to be detected by the vehicle keyless-go system if it is located next to a mobile phone, laptop or other electronic device;...
  • Page 42 40 GETTING TO KNOW YOUR VEHICLE NOTE: All doors will unlock when the front passenger door handle is grabbed regardless of the driver’s door unlock preference setting (“Unlock Driver Door 1st Press” or “Unlock All Doors 1st Press”). To Lock The Vehicle’s Doors And Liftgate With one of the vehicle’s Passive Entry key fob within 5 ft (1.5 m) of the driver or passenger front door handles, push the door handle lock button to lock all four doors.
  • Page 43 GETTING TO KNOW YOUR VEHICLE 41 FOBIK-Safe only executes in vehicles with Passive NOTE: The vehicle will only unlock the doors when a Entry. There are three situations that trigger a FOBIK- valid Passive Entry key fob is detected inside the Safe search in any Passive Entry vehicle: vehicle, and no valid Passive Entry key fob is detected outside the vehicle.
  • Page 44 42 GETTING TO KNOW YOUR VEHICLE WARNING! • Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be severely injured or killed.
  • Page 45 GETTING TO KNOW YOUR VEHICLE 43 To Unlock/Enter The Liftgate NOTE: If “Unlock All Doors 1st Press” is programmed in the instrument cluster display, if equipped, all doors The liftgate Passive Entry unlock feature is built into the will unlock when you push the Electronic Release. If electronic liftgate release.
  • Page 46: Child Locks

    44 GETTING TO KNOW YOUR VEHICLE NOTE: The liftgate Passive Entry lock button will only This device complies with Part 15 of the FCC Rules and lock the liftgate. The liftgate unlock feature is built into with Industry Canada license-exempt RSS standard(s). the electronic liftgate release.
  • Page 47 GETTING TO KNOW YOUR VEHICLE 45 • After engaging the Child-Protection Door Lock sys- tem, always test the door from the inside to make certain it is in the desired position. • For emergency exit with the system engaged, rotate the lock button to the unlocked position, roll down the window, and open the door with the outside door handle.
  • Page 48: Seats

    46 GETTING TO KNOW YOUR VEHICLE SEATS Manual Adjustment Front Seats Seats are a part of the Occupant Restraint System of the vehicle. WARNING! • It is dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed.
  • Page 49 GETTING TO KNOW YOUR VEHICLE 47 reached the desired position. Then, using body pres- Height Adjustment sure, move forward and rearward on the seat to be sure The front driver and passenger seats height can be that the seat adjusters have latched. raised or lowered by using a lever, located on the outboard side of the seat.
  • Page 50: Power Adjustment Front Seats - If Equipped

    48 GETTING TO KNOW YOUR VEHICLE Power Adjustment Front Seats — If Equipped Forward Or Rearward Adjustment The power seat controls are located on the outboard The seat can be adjusted both forward and rearward. side of the seat, close to the floor. Push the seat switch forward or rearward, the seat will move in the direction of the switch.
  • Page 51: Heated Seats - If Equipped

    GETTING TO KNOW YOUR VEHICLE 49 Power Lumbar Adjustment Vehicles Equipped With Remote Start Push the switch forward or rearward to increase or Vehicles equipped with Remote Start, the heated seats decrease the lumbar support. Push the switch upward can be programmed to come on during a Remote Start or downward to raise or lower the lumbar support.
  • Page 52: Rear Seats

    50 GETTING TO KNOW YOUR VEHICLE Rear Seats WARNING! The split rear seat increases the storage of the rear cargo • It is extremely dangerous to ride in a cargo area, area. inside or outside of a vehicle. In a collision, NOTE: people riding in these areas are more likely to be •...
  • Page 53 GETTING TO KNOW YOUR VEHICLE 51 Removing Shelf — If Equipped 2. Lift the rear part of the overhead luggage shelf. Proceed as follows: 3. Clear the pins placed outside of the shelf, and then remove the rear shelf pulling it upwards. 1.
  • Page 54 52 GETTING TO KNOW YOUR VEHICLE 4. Pull the seatback release lever to fold the left or right Proceed as follows: rear seatback completely forward. 1. Remove the rear shelf (if equipped). 2. Fully lower the rear seat head restraints. 3.
  • Page 55: Head Restraints

    GETTING TO KNOW YOUR VEHICLE 53 top of the head restraint is located above the top of your ear. WARNING! • All occupants, including the driver, should not operate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper posi- tions in order to minimize the risk of neck injury in the event of a crash.
  • Page 56: Rear Head Restraints

    54 GETTING TO KNOW YOUR VEHICLE restraint as far as it can go then push the release button WARNING! and adjustment button at the base of each post while • A loose head restraint thrown forward in a colli- pulling the head restraint up. To reinstall the head restraint, put the head restraint posts into the holes and sion or hard stop could cause serious injury or push downward.
  • Page 57: Steering Wheel

    GETTING TO KNOW YOUR VEHICLE 55 To remove the head restraint, raise it as far as it can go WARNING! then push the release button and adjustment button at • A loose head restraint thrown forward in a colli- the base of each post while pulling the head restraint up.
  • Page 58: Heated Steering Wheel - If Equipped

    56 GETTING TO KNOW YOUR VEHICLE WARNING! Do not adjust the steering column while driving. Adjusting the steering column while driving or driving with the steering column unlocked, could cause the driver to lose control of the vehicle. Failure to follow this warning may result in serious injury or death.
  • Page 59: Mirrors

    GETTING TO KNOW YOUR VEHICLE 57 Auto On Comfort — If Equipped behind you can be reduced by moving the lever under the mirror to the night position (toward the rear of the If the external temperature is below 40 °F (5 °C) at each vehicle).
  • Page 60: Outside Mirrors

    58 GETTING TO KNOW YOUR VEHICLE when the dimming feature is activated. The sensor to NOTE: the right of the button does not illuminate. • To adjust the power mirrors, the ignition must be in RUN mode. • Once the mirror is adjusted, rotate the control to the neutral position to avoid accidental movements.
  • Page 61: Heated Mirrors - If Equipped

    GETTING TO KNOW YOUR VEHICLE 59 Folding Mirror BLIND SPOT MONITORING (BSM) — IF EQUIPPED The exterior mirrors are hinged to allow the mirror to pivot forward or rearward to help avoid damage. The The Blind Spot Monitoring (BSM) system uses two mirror has three detent positions: full forward, normal radar-based sensors, located inside the rear bumper and full rearward.
  • Page 62 60 GETTING TO KNOW YOUR VEHICLE vehicle is in any forward gear or REVERSE and enters properly. Do not block the radar sensors located on the stand-by mode when the vehicle is in PARK. rear fascia with foreign objects (bumper stickers, bicycle racks, etc.).
  • Page 63 GETTING TO KNOW YOUR VEHICLE 61 Entering From The Side Vehicles that move into your adjacent lanes from either side of the vehicle. BSM Warning Light The BSM system monitors the detection zone from three different entry points (side, rear, front) while driving to see if an alert is necessary.
  • Page 64 62 GETTING TO KNOW YOUR VEHICLE Entering From The Rear Vehicles that come up from behind your vehicle on either side and enter the rear detection zone with a relative speed of less than 31 mph (50 km/h). Overtaking/Approaching Rear Monitoring Overtaking Traffic If you pass another vehicle slowly with a relative speed less than 15 mph (25 km/h) and the vehicle remains in...
  • Page 65 GETTING TO KNOW YOUR VEHICLE 63 The BSM system is designed not to issue an alert on stationary objects such as guardrails, posts, walls, foli- age, berms, etc. However, occasionally the system may alert on such objects. This is normal operation and your vehicle does not require service.
  • Page 66: Rear Cross Path (Rcp)

    64 GETTING TO KNOW YOUR VEHICLE Rear Cross Path (RCP) 1 mph (2 km/h), to objects moving a maximum of approximately 22 mph (35 km/h), such as in parking lot The Rear Cross Path (RCP) feature is intended to aid the situations.
  • Page 67: Mode Of Operation

    GETTING TO KNOW YOUR VEHICLE 65 Mode Of Operation NOTE: Whenever an audible alert is requested by the BSM system, the radio is also muted. Three selectable modes of operation are available in the Uconnect System. Refer to “Uconnect Settings” in When the system is in RCP, the system will respond “Multimedia”...
  • Page 68: Blind Spot Monitoring Fault Warnings

    66 GETTING TO KNOW YOUR VEHICLE Blind Spot Monitoring Fault Warnings NOTE: Vehicle must be taken to the nearest authorized dealer for service. Sensor Blinded General Information In the case of a sensor blinded: This vehicle has systems that operate on radio fre- •...
  • Page 69: Automatic Lighting - If Equipped

    GETTING TO KNOW YOUR VEHICLE 67 operation of the headlights, side marker lights, daytime Automatic Lighting — If Equipped running lights, fog lights and the dimming of the Light Sensor instrument cluster and interior lighting. The light sensor is equipped with an infrared LED, located on the windshield.
  • Page 70: Daytime Running Lights (Drl) - If Equipped

    68 GETTING TO KNOW YOUR VEHICLE Daytime Running Lights (DRL) — If Equipped NOTE: • The fog lights will operate with the low beam head- The Daytime Running Lights (DRLs) will turn on when lights or parking lights on. Selecting the high beam the engine is started and remain on unless the head- headlights will turn off the fog lights.
  • Page 71: High Beams

    GETTING TO KNOW YOUR VEHICLE 69 turn off the headlights within two minutes. The delay interval begins when the headlight switch is turned off. Headlight Delay Disable The feature is disabled by turning on the headlights, the parking lights or by placing the ignition in RUN mode. If you shut off the lights before the ignition is turned on, they will turn off in the normal manner.
  • Page 72: Turn Signals

    70 GETTING TO KNOW YOUR VEHICLE Turn Signals Move the multifunction lever up or down and the arrows on each side of the instrument cluster flash to show proper operation of the front and rear turn signal lights. When the Daytime Running Lights are on and a turn signal is activated, the Daytime Running Lamp will turn off on the side of the vehicle in which the turn signal is flashing.
  • Page 73 GETTING TO KNOW YOUR VEHICLE 71 NOTE: NOTE: The timing stops once the ignition is placed in the RUN or START mode. • Before exiting the vehicle, make sure that the interior lights are turned off. This will prevent the battery The dome light will turn off under any of the following from discharging once the doors are closed.
  • Page 74 72 GETTING TO KNOW YOUR VEHICLE The dome light timing is disabled when the doors are Lower Glove Compartment Light locked. An interior light is located is the lower glove compart- ment. Illuminated Vanity Mirrors — If Equipped An illuminated vanity mirror is located on each sun This light automatically turn on/off when the glove visor.
  • Page 75: Rear Dome Light - If Equipped

    GETTING TO KNOW YOUR VEHICLE 73 Rear Dome Light — If Equipped Push the switch on the rear dome light once to turn the light on, the light will remain on at all times. Push the switch a second time to turn the light off, the lights will remain off until a door is opened.
  • Page 76: Instrument Panel Dimmer And Ambient Light Control

    74 GETTING TO KNOW YOUR VEHICLE With the parking lights or headlights on, rotate the instrument panel dimmer control upward or down- ward to increase or decrease the brightness of the instrument panel. At the top detent of the instrument panel dimmer, all the interior lights will also illuminate.
  • Page 77: Wipers And Washers

    GETTING TO KNOW YOUR VEHICLE 75 WIPERS AND WASHERS CAUTION! Front Wiper Operation Always remove any buildup of snow that prevents The windshield wiper/washer controls are located on the windshield wiper blades from returning to the the lever on the right side of the steering column. The “park”...
  • Page 78: Rain Sensor - If Equipped

    76 GETTING TO KNOW YOUR VEHICLE If the lever is pulled while the wipers are in the off Rain Sensor — If Equipped position, the wipers will operate for several wipe cycles, This feature senses moisture on the windshield and then turn off.
  • Page 79 GETTING TO KNOW YOUR VEHICLE 77 • Low Ambient Temperature — When the ignition is wiper sensitivity. Setting two can be used if the driver desires more sensitivity. Place the wiper switch in the first turned to RUN, the Rain Sensing system will not off (O) position when not using the system.
  • Page 80: Rear Window Wiper/Washer

    78 GETTING TO KNOW YOUR VEHICLE Rear Window Wiper/Washer NOTE: • As a protective measure, the pump will stop if the The rear wiper/washer controls are located on the lever switch is held for more than 30 seconds. Once the on the right side of the steering column.
  • Page 81: Windshield Wiper De-Icer - If Equipped

    GETTING TO KNOW YOUR VEHICLE 79 minutes. To manually shut the defroster off, push the Windshield Wiper De-Icer — If Equipped button a second time. Your vehicle may be equipped with a Windshield Wiper De-Icer feature that may be activated under the follow- CAUTION! ing conditions: •...
  • Page 82: Climate Controls

    80 GETTING TO KNOW YOUR VEHICLE CLIMATE CONTROLS Air Outlet And Diffuser Locations — Passenger Compartment Center Air Outlets 1 — Air Flow Outlet Adjustment 2 — Adjustable Air Outlet 3 — Air Vane Adjustment Left Side Air Outlets 1 — Fixed Air Outlet 2 —...
  • Page 83: Manual Climate Controls Overview

    GETTING TO KNOW YOUR VEHICLE 81 Manual Climate Controls Overview Right Side Air Outlets 1 — Fixed Air Outlet Manual Climate Controls 2 — Adjustable Air Outlet 3 — Air Vane Adjustment 4 — Air Flow Outlet Adjustment...
  • Page 84 82 GETTING TO KNOW YOUR VEHICLE Manual Climate Control Descriptions Icon Description MAX A/C Setting MAX A/C sets the system for maximum cooling performance. Rotate the temperature con- trol adjust knob counterclockwise to the MAX A/C setting. In MAX A/C, the blower speed and mode position can be adjusted to desired user settings.
  • Page 85 GETTING TO KNOW YOUR VEHICLE 83 Icon Description Front Defrost Mode Air is directed through the windshield and side window demister outlets. Use this mode with maximum blower and temperature settings for best windshield and side window de- frosting. NOTE: The air conditioning compressor operates in Mix or Defrost, even if the Air Condi- tioning (A/C) button is not pushed.
  • Page 86 84 GETTING TO KNOW YOUR VEHICLE Icon Description Panel Mode Panel Mode Air is directed through the outlets in the instrument panel. These outlets can be adjusted to direct airflow. The center instrument panel outlets can be adjusted so that they are directed toward the rear seat passengers for maximum airflow to the rear.
  • Page 87 GETTING TO KNOW YOUR VEHICLE 85 If equipped, push the rear defrost button to activate the CAUTION! defrosting of door mirrors and heated rear window. Failure to follow these cautions can cause damage CAUTION! to the heating elements: • Use care when washing the inside of the rear To avoid causing damage to the rear window de- window.
  • Page 88: Automatic Climate Control Overview

    86 GETTING TO KNOW YOUR VEHICLE System Maintenance Automatic Climate Control Overview In Winter, the Climate Control system must be turned on at least once a month for approximately 10 minutes. Have the system inspected at an authorized dealer before the summer. NOTE: The system uses R-1234yf (refrigerant) which does not pollute the environment in the event of accidental leakage.
  • Page 89 GETTING TO KNOW YOUR VEHICLE 87 Automatic Climate Control Descriptions Icon Description MAX A/C Setting MAX A/C sets the system for maximum cooling performance. Rotate the driver tempera- ture control adjust knob counterclockwise for MAX A/C. Both driver and passenger tem- perature displays will show MAX A/C LO.
  • Page 90 88 GETTING TO KNOW YOUR VEHICLE Icon Description Recirculation Button Push to change the current setting. The LED illuminates when ON. NOTE: • When in Max Defrost mode, the Recirculation button will change the setting to normal Defrost mode. This indicates that you can not enter to this mode due to fogging risk. •...
  • Page 91 GETTING TO KNOW YOUR VEHICLE 89 Icon Description Rear Defrost Button Push the Rear Defrost button to turn on the rear window defroster and the heated outside mirrors (if equipped). An indicator will illuminate when the rear window defroster is on. The rear window defroster automatically turns OFF after 20 minutes.
  • Page 92 90 GETTING TO KNOW YOUR VEHICLE Icon Description Panel Mode Panel Mode Air comes from the outlets in the instrument panel. Each of these outlets can be individu- ally adjusted to direct the flow of air. The air vanes of the center outlets and outboard out- lets can be moved up and down or side to side to regulate airflow direction.
  • Page 93 GETTING TO KNOW YOUR VEHICLE 91 Icon Description Mix Mode Mix Mode Mix Mode is obtained by pressing both the Windshield Mode button and the Floor Mode button, activating them both. Air is directed through the floor, defrost, and side window demister outlets.
  • Page 94 92 GETTING TO KNOW YOUR VEHICLE NOTE: With the compressor off, air cannot be intro- CAUTION! duced to the passenger compartment with a tempera- ture lower than the outside temperature. Under certain Failure to follow these cautions can cause damage environmental conditions, windows could fog rapidly to the heating elements: •...
  • Page 95 GETTING TO KNOW YOUR VEHICLE 93 The Climate Control system carries out the following Selecting the footwell/windshield or only windshield operations: distribution activates the Climate Control system com- pressor and the air recirculation is set to outside air • Turns on the air conditioning compressor when en- intake.
  • Page 96 94 GETTING TO KNOW YOUR VEHICLE Turning Off The Climate Control System System Maintenance Push the ON/OFF button. In Winter, the Climate Control system must be turned on at least once a month for approximately 10 minutes. With the Climate Control system off: Have the system inspected at an authorized dealership •...
  • Page 97: Operating Tips

    GETTING TO KNOW YOUR VEHICLE 95 3. When the system is set up for your comfort level, it NOTE: The system will not automatically sense the is not necessary to change the settings. You will presence of fog, mist or ice on the windshield. Defrost experience the greatest efficiency by simply allowing mode must be manually selected to clear the wind- the system to function automatically.
  • Page 98 96 GETTING TO KNOW YOUR VEHICLE Winter Operation Outside Air Intake To ensure the best possible heater and defroster perfor- Make sure the air intake, located directly in front of the mance, make sure the engine cooling system is func- windshield, is free of obstructions such as leaves.
  • Page 99 GETTING TO KNOW YOUR VEHICLE 97 Operating Tips Chart...
  • Page 100: Windows

    98 GETTING TO KNOW YOUR VEHICLE WINDOWS There are single window controls on each passenger door trim panel, which operate the passenger door Driver’s Door Controls windows. The window controls will operate only when The power window switch is located on the driver’s the ignition is in the ON/RUN or START position.
  • Page 101 GETTING TO KNOW YOUR VEHICLE 99 Auto-Down Feature — If Equipped Auto-Up Feature With Anti-Pinch Protection — If Equipped Push To Activate Auto-Down Feature Lift To Activate Auto-Up Feature The driver and passenger power window switches have an Auto-down feature. Push the switch for half a second Lift and hold the window switch for half a second, and release it;...
  • Page 102: Power Sunroof - If Equipped

    100 GETTING TO KNOW YOUR VEHICLE NOTE: Wind Buffeting • If the window runs into any obstacle during auto- Wind buffeting can be described as the perception of closure, it will reverse direction and then go back pressure on the ears or a helicopter-type sound in the down.
  • Page 103: Opening The Sunroof

    GETTING TO KNOW YOUR VEHICLE 101 WARNING! (Continued) switch. Such entrapment may result in serious injury or death. • In a collision, there is greater risk of being thrown from a vehicle with an open sunroof. You could also be seriously injured or killed. Always fasten your seat belt properly and make sure all passen- gers are properly secured too.
  • Page 104: Closing The Sunroof

    102 GETTING TO KNOW YOUR VEHICLE Closing The Sunroof Sun Shade To close the front panel completely, pull the sunroof The two sun shades are manually operated and can be switch from the open position. The sunroof can be adjusted in any position. stopped in any position by pulling the sunroof switch a Anti-Pinch Safety Device second time while it is closing.
  • Page 105: Power Sunroof Relearn Procedure

    GETTING TO KNOW YOUR VEHICLE 103 Power Sunroof Relearn Procedure As a result of any abnormal behavior of the roof or as a result of an emergency operation, and you must relearn the automatic operation of the sunroof. Proceed as follows: 1.
  • Page 106: Hood

    104 GETTING TO KNOW YOUR VEHICLE HOOD 2. Move to the outside of the vehicle. Opening 3. Push the safety latch release lever toward the pas- senger side of the vehicle. The safety latch is located The hood release lever (to open the primary latch) and behind the center front edge of the hood.
  • Page 107: Closing

    GETTING TO KNOW YOUR VEHICLE 105 Closing 1. Hold up the hood with one hand and with the other hand remove the support rod from its seat and reinsert it into the locking tab. 2. Lower the hood to approximately 12 inches (30 cm) from the engine compartment and drop it.
  • Page 108: Liftgate

    106 GETTING TO KNOW YOUR VEHICLE LIFTGATE interior dome light will turn off automatically by clos- ing the liftgate. Refer to “Interior Lights” in “Getting To The liftgate release function is disabled when the ve- Know Your Vehicle.” hicle is in motion. If the liftgate is left open, the interior dome light will Opening shut off after a few minutes to conserve battery life.
  • Page 109: Closing

    GETTING TO KNOW YOUR VEHICLE 107 3. Insert the screwdriver into the release tab slot to Closing trigger the release tab of the liftgate. Grasp the liftgate closing handle and lower the liftgate. 2 — Release Tab Slot Liftgate Closing Handle NOTE: Before closing the liftgate, make sure to be in possession of the key because the liftgate will be locked automatically.
  • Page 110 108 GETTING TO KNOW YOUR VEHICLE Position 1 (Floor Flush): This position allows you to make the load floor flat for ease of loading/unloading objects from the cargo area. This position also makes it possible to use the space below as another compartment for storing fragile or smaller objects.
  • Page 111 GETTING TO KNOW YOUR VEHICLE 109 Access To Tire Service Kit Or Spare Tire To access the Tire Service Kit or spare tire and container carrier, proceed as follows: 1. Grasp the load floor handle and remove the floor. 2. Pull the tab and lift up on the carpet. Anchoring Of The Load The cargo tie-downs, located on the trim panels around the cargo area floor, should be used to safely secure...
  • Page 112: Internal Equipment

    110 GETTING TO KNOW YOUR VEHICLE Cargo Box — If Equipped INTERNAL EQUIPMENT The cargo area contains a preformed cargo box that can Glove Compartments be used for the storage of objects that allows you to The glove compartments are located on the passenger obtain a uniform level when loading.
  • Page 113: Sun Visors "Slide-On-Rod

    GETTING TO KNOW YOUR VEHICLE 111 Lower Glove Compartment Sun Visors “Slide-On-Rod” To open the lower glove compartment, pull outward on Sun visors are located on both sides of the rearview the latch and lower the glove compartment door. mirror. The visors can be lowered or moved to the side to help block sunlight from entering the windshield or door glass.
  • Page 114: Power Outlets

    112 GETTING TO KNOW YOUR VEHICLE Extendible Sun Visor Power Outlets To extend the sun visor, proceed as follows: The front power outlet is located under the center stack of the instrument panel. It only operates with the 1. Place the sun visor against the door glass by detach- ignition in the RUN position.
  • Page 115: Cigar Lighter - If Equipped

    GETTING TO KNOW YOUR VEHICLE 113 WARNING! CAUTION! (Continued) plugged in long enough, the vehicle’s battery will To avoid serious injury or death: discharge sufficiently to degrade battery life • Only devices designed for use in this type of and/or prevent the engine from starting. outlet should be inserted into any 12 Volt outlet.
  • Page 116 114 GETTING TO KNOW YOUR VEHICLE WARNING! When the cigar lighter is in use it becomes very hot. To avoid serious injury, handle the cigar lighter with care. Always check that the cigar lighter has turned off. CAUTION! Do not connect devices with power higher than 180 Watts (15 Amps) to the socket.
  • Page 117: Ashtray - If Equipped

    GETTING TO KNOW YOUR VEHICLE 115 Ashtray — If Equipped NOTE: Ashtrays can be purchased at an authorized dealer through MOPAR parts. The ashtray is a plastic container that can be placed into one of the cup holders. Front Armrest Handle Ashtray Location Front Armrest The front armrest is located between the front seats.
  • Page 118: Cupholders

    116 GETTING TO KNOW YOUR VEHICLE Cupholders There are two cupholders for the front seat passengers, located in the center console. Storage Compartment Front Cupholders Push the storage handle and lift up the armrest to access the storage compartment. WARNING! Do not operate this vehicle with a console compart- ment lid in the open position.
  • Page 119: Grab Handles

    GETTING TO KNOW YOUR VEHICLE 117 Grab Handles ROOF LUGGAGE RACK — IF EQUIPPED The Grab Handles are located immediately above the Your vehicle may be equipped with a Roof Luggage doors. The rear handles are equipped with hooks for Rack for transporting accessories.
  • Page 120 118 GETTING TO KNOW YOUR VEHICLE WARNING! CAUTION! (Continued) evenly as possible and secure the load appropri- Roof rack cargo must be securely tied down before ately. driving your vehicle. Improperly secured loads may • Long loads, which extend over the windshield, fall off the vehicle, particularly at high speeds, such as wood panels or surfboards, should be resulting in personal injury or property damage.
  • Page 121 GETTING TO KNOW YOUR INSTRUMENT PANEL CONTENTS ▫ Engine Oil Change Reset ....125 INSTRUMENT CLUSTER ....120 ▫...
  • Page 122: Instrument Cluster

    120 GETTING TO KNOW YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER...
  • Page 123: Onboard Diagnostic System (Obd Ii)

    GETTING TO KNOW YOUR INSTRUMENT PANEL 121 1. Speedometer In the normal use of the car, the temperature gauge • Indicates the speed of the car. can move in different directions based on the use of the car. The light comes on, together with a chime 2.
  • Page 124: Onboard Diagnostic System (Obd Ii) Cybersecurity

    122 GETTING TO KNOW YOUR INSTRUMENT PANEL If any of these systems require service, the OBD II to access this information to assist with the diagnosis system will turn on the “Malfunction Indicator Light and service of your vehicle and emissions system. (MIL).”...
  • Page 125: Instrument Cluster Display

    GETTING TO KNOW YOUR INSTRUMENT PANEL 123 INSTRUMENT CLUSTER DISPLAY The display shows the following information, if equipped: Instrument Cluster Display Description The vehicle can be equipped with an instrument cluster ZONE LOCATIONS CONTENT display which offers useful information to the driver. Zone 1 &...
  • Page 126: Instrument Cluster Display Control Buttons

    124 GETTING TO KNOW YOUR INSTRUMENT PANEL • Down Arrow Button Instrument Cluster Display Control Buttons The system allows the driver to select information by Push and release the down arrow button to pushing the following buttons mounted on the steering scroll downward through the main menu and wheel: submenus.
  • Page 127: Engine Oil Change Reset

    GETTING TO KNOW YOUR INSTRUMENT PANEL 125 Engine Oil Change Reset NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not Your vehicle is equipped with an engine oil change reset. If necessary, repeat this procedure. indicator system.
  • Page 128 126 GETTING TO KNOW YOUR INSTRUMENT PANEL • Drive Mode Selector Trip – Auto Mode This instrument cluster display menu item allows you – Sport Mode to view and select information about the Trip Com- puter”: – Traction/All Weather Mode •...
  • Page 129 GETTING TO KNOW YOUR INSTRUMENT PANEL 127 • Trip B – Traction Mode Description – View and change Trip B distance (miles or km). – Temperature – View and change travel time B (hours/minutes/ – All Weather Mode Description seconds). Vehicle Info –...
  • Page 130 128 GETTING TO KNOW YOUR INSTRUMENT PANEL • Notice LaneSense • Bluetooth Displays the song title and a graphic • By selecting this function, you can select the readi- element. ness of LaneSense, choosing between the options • SAT displays the station name and a graphic ele- Near, Medium, or Far.
  • Page 131 GETTING TO KNOW YOUR INSTRUMENT PANEL 129 • Safety and Assistance incoming/on hold, and the management of double calls (first incoming second waiting, etc.). • Lights • Navigation Repetition: Allows you to select “On” or • Doors and Locks “Off”, on the instrument cluster display, information Refer to “Uconnect Settings”...
  • Page 132 130 GETTING TO KNOW YOUR INSTRUMENT PANEL • ParkSense Vol.: A selection of the volume of acoustic Security signals provided by ParkSense. By selecting the item “Security,” you can make the • Auto Wipers: Enabling/disabling the automatic op- following adjustments: eration of wipers in the event of rain.
  • Page 133 GETTING TO KNOW YOUR INSTRUMENT PANEL 131 • Interior Ambient Lights: Increase of decrease the • Sound Horn With Lock: Activate/deactivate the horn brightness of the Interior Ambient Lights. when pushing the lock button on the Remote Keyless Entry. The options are Off, First Press,” and Sec- •...
  • Page 134: Warning And Indicator Lights

    132 GETTING TO KNOW YOUR INSTRUMENT PANEL WARNING AND INDICATOR LIGHTS All active telltales will display first if applicable. The system check menu may appear different based upon The warning/indicator lights switch on in the instru- equipment options and current vehicle status. Some ment panel together with a dedicated message and/or telltales are optional and may not appear.
  • Page 135 GETTING TO KNOW YOUR INSTRUMENT PANEL 133 Seat Belt Reminder Warning Light Red Telltale What It Means Light Seat Belt Reminder Warning Light When the ignition switch is first turned to ON/RUN, this light will turn on for four to eight seconds as a bulb check.
  • Page 136 134 GETTING TO KNOW YOUR INSTRUMENT PANEL The dual brake system provides a reserve braking WARNING! capacity in the event of a failure to a portion of the hydraulic system. A leak in either half of the dual brake Driving a vehicle with the red brake light on is system is indicated by the Brake Warning Light, which dangerous.
  • Page 137 GETTING TO KNOW YOUR INSTRUMENT PANEL 135 Operation of the Brake Warning Light can be checked The light also will turn on when the parking brake is by placing the ignition in the MAR (ACC/ON/RUN) applied with the ignition placed in the MAR (ACC/ position.
  • Page 138 136 GETTING TO KNOW YOUR INSTRUMENT PANEL Coolant Temperature Warning Light Red Telltale What It Means Light Coolant Temperature Warning Light This light warns of an overheated engine condition. If the light turns on while driving, safely pull over and stop the vehicle. If the A/C system is on, turn it off. Also, shift the transmission into NEUTRAL and idle the vehicle.
  • Page 139 GETTING TO KNOW YOUR INSTRUMENT PANEL 137 Electric Power Steering Fail Warning Light — If Equipped Red Telltale What It Means Light Electric Power Steering Fail Warning — If Equipped This light is used to manage the electrical warning of the EPS (Electric Power Steering). Re- fer to “Power Steering”...
  • Page 140 138 GETTING TO KNOW YOUR INSTRUMENT PANEL Red Telltale What It Means Light Do not operate the vehicle until the cause is corrected. This light does not indicate how much oil is in the engine. The engine oil level must be checked under the hood. Transmission Fault Warning Light Red Telltale What It Means...
  • Page 141 GETTING TO KNOW YOUR INSTRUMENT PANEL 139 Vehicle Security Warning Light — If Equipped Red Telltale What It Means Light Vehicle Security Warning Light — If Equipped This light will flash at a fast rate for approximately 15 seconds when the vehicle security alarm is arming, and then will flash slowly until the vehicle is disarmed.
  • Page 142: Yellow Telltale Indicator Lights

    140 GETTING TO KNOW YOUR INSTRUMENT PANEL Yellow Telltale Indicator Lights Low Fuel Indicator Light Yellow Telltale What It Means Light Low Fuel Indicator Light When the fuel level reaches approximately 1.3–1.8 gal (5–7 L) this light will turn on, and remain on until fuel is added.
  • Page 143 GETTING TO KNOW YOUR INSTRUMENT PANEL 141 Yellow Telltale What It Means Light When the engine is running, the MIL may flash to alert serious conditions that could lead to immediate loss of power or severe catalytic converter damage. The vehicle should be ser- viced as soon as possible if this occurs.
  • Page 144 142 GETTING TO KNOW YOUR INSTRUMENT PANEL Wait To Start Light — If Equipped Yellow Telltale What It Means Light Wait To Start Light The “Wait To Start” telltale will illuminate for approximately two seconds when the ignition is turned to the RUN position. It’s duration may be longer based on colder operating condi- tions.
  • Page 145 GETTING TO KNOW YOUR INSTRUMENT PANEL 143 Transmission Temperature Indicator Light Yellow Telltale What It Means Light Transmission Temperature Indicator Light This light indicates that the transmission fluid temperature is running hot. This may occur with severe usage, such as trailer towing. If this light turns on, safely pull over and stop the vehicle.
  • Page 146 144 GETTING TO KNOW YOUR INSTRUMENT PANEL Tire Pressure Monitoring System (TPMS) Warning Light Yellow Telltale What It Means Light Tire Pressure Monitoring System (TPMS) Warning Light The warning light switches on and a message is displayed to indicate that the tire pressure is lower than the recommended value and/or that slow pressure loss is occurring.
  • Page 147 GETTING TO KNOW YOUR INSTRUMENT PANEL 145 Under-inflation also reduces fuel efficiency and tire ensure that the replacement or alternate tires and tread life, and may affect the vehicle’s handling and wheels allow the TPMS to continue to function prop- stopping ability.
  • Page 148 146 GETTING TO KNOW YOUR INSTRUMENT PANEL Stop Light Failure Indicator Light Yellow Telltale What It Means Light Stop Light Failure Indicator Light This light will illuminate if one or more of the stop light bulb fails. The failure relating to this light could be: •...
  • Page 149 GETTING TO KNOW YOUR INSTRUMENT PANEL 147 Service Stop/Start System Indicator Light — If Equipped Yellow Telltale What It Means Light Service Stop/Start System Indicator Light — If Equipped This telltale will turn on to indicate the Stop/Start system is not functioning properly and service is required.
  • Page 150 148 GETTING TO KNOW YOUR INSTRUMENT PANEL Electric Park Brake Fail Light Yellow Telltale What It Means Light Electric Park Brake Fail Warning Light This telltale will turn on to indicate the Electric Park Brake is not functioning properly and that service is required.
  • Page 151 GETTING TO KNOW YOUR INSTRUMENT PANEL 149 Electronic Stability Control (ESC) Indicator Light — If Equipped Yellow Telltale What It Means Light Electronic Stability Control (ESC) Indicator Light The “ESC Indicator Light” in the instrument cluster will come on when the ignition switch is turned to the AVV/START position.
  • Page 152: Green Telltale Indicator Lights

    150 GETTING TO KNOW YOUR INSTRUMENT PANEL Electronic Stability Control (ESC) OFF Indicator Light Yellow Telltale What It Means Light Electronic Stability Control (ESC) OFF Indicator Light This light indicates the Electronic Stability Control (ESC) is off. Green Telltale Indicator Lights Turn Signal Indicator Lights Green Telltale What It Means...
  • Page 153 GETTING TO KNOW YOUR INSTRUMENT PANEL 151 Park/Headlight On Indicator Light Green Telltale What It Means Light Park/Headlight On Indicator Light This indicator will illuminate when the park lights or headlights are turned on. Front Fog Indicator Light — If Equipped Green Telltale What It Means Light...
  • Page 154: White Telltale Indicator Lights

    152 GETTING TO KNOW YOUR INSTRUMENT PANEL White Telltale Indicator Lights Cruise Control On Indicator Light White Telltale What It Means Light Cruise Control On Indicator Light This light will turn on when the cruise control has been enabled by the driver. Blue Telltale Indicator Lights High Beam Indicator Light Blue Telltale...
  • Page 155 SAFETY CONTENTS ▫ Occupant Restraint Systems Features ..162 BRAKE SYSTEM ..... .154 ▫ Important Safety Precautions ... .162 ELECTRONIC BRAKE CONTROL SYSTEM .
  • Page 156: Brake System

    154 SAFETY BRAKE SYSTEM WARNING! (Continued) Your vehicle is equipped with dual hydraulic brake lining wear, and possible brake damage. You systems. If either of the two hydraulic systems loses would not have your full braking capacity in an normal capability, the remaining system will still func- emergency.
  • Page 157: Electronic Brake Force Distribution (Ebd)

    SAFETY 155 Electronic Brake Force Distribution (EBD) braking conditions. The system automatically prevents wheel lock, and enhances vehicle control during brak- This function manages the distribution of the braking ing. torque between the front and rear axles by limiting braking pressure to the rear axle. This is done to prevent The ABS performs a self-check cycle to ensure that the overslip of the rear wheels to avoid vehicle instability, ABS is working properly each time the vehicle is started...
  • Page 158: Anti-Lock Brake Warning Light

    156 SAFETY WARNING! WARNING! (Continued) • The capabilities of an ABS equipped vehicle must • The ABS contains sophisticated electronic equip- never be exploited in a reckless or dangerous ment that may be susceptible to interference manner that could jeopardize the user’s safety or caused by improperly installed or high output the safety of others.
  • Page 159: Brake Assist System (Bas)

    SAFETY 157 Warning Light” does not come on when the ignition WARNING! (Continued) switch is turned to the ON position, have the light nor can it increase the traction afforded by prevail- repaired as soon as possible. ing road conditions. BAS cannot prevent collisions, Brake Assist System (BAS) including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydro-...
  • Page 160 158 SAFETY • Driver door must be closed. WARNING! (Continued) • The vehicle must be on a sufficient grade. attention is always required while driving to main- • The gear selection must match vehicle uphill direc- tain safe control of your vehicle. Failure to follow these warnings can result in a collision or serious tion (i.e., vehicle facing uphill is in forward gear;...
  • Page 161: Traction Control System (Tcs)

    SAFETY 159 4. Start the engine. Limited Differential (BLD), functions similar to a lim- ited slip differential and controls the wheel spin across 5. Rotate the steering wheel slightly more than one-half a driven axle. If one wheel on a driven axle is spinning turn to the left.
  • Page 162 160 SAFETY • Understeer - when the vehicle is turning less than WARNING! appropriate for the steering wheel position. • Electronic Stability Control (ESC) cannot prevent The “ESC Activation/Malfunction Indicator Light” lo- the natural laws of physics from acting on the cated in the instrument cluster will start to flash as soon vehicle, nor can it increase the traction afforded as the ESC system becomes active.
  • Page 163: Electronic Roll Mitigation (Erm)

    SAFETY 161 NOTE: ERM is disabled anytime the ESC is in “Full WARNING! (Continued) Off” mode (if equipped). Refer to “Electronic Stability inflated and unevenly worn tires may also de- Control (ESC)” in this section for a complete explana- grade ESC performance. Any vehicle modifica- tion of the available ESC modes.
  • Page 164: Occupant Restraint Systems

    162 SAFETY maintain vehicle stability. The only notification the Important Safety Precautions driver receives that the feature is active is the torque Please pay close attention to the information in this applied to the steering wheel. section. It tells you how to use your restraint system properly, to keep you and your passengers as safe as NOTE: The DST feature is only meant to help the driver possible.
  • Page 165: Seat Belt Systems

    SAFETY 163 4. Never allow children to slide the shoulder belt WARNING! behind them or under their arm. • Never place a rear-facing child restraint in front of 5. You should read the instructions provided with your an air bag. A deploying passenger front air bag child restraint to make sure that you are using it can cause death or serious injury to a child 12 properly.
  • Page 166 164 SAFETY Enhanced Seat Belt Use Reminder System and the driver or outboard front seat passenger is (BeltAlert) unbuckled (if equipped with outboard front passenger seat BeltAlert) (the outboard front passenger seat Driver And Passenger BeltAlert — If Equipped BeltAlert is not active when the outboard front passen- BeltAlert is a feature intended to remind the ger seat is unoccupied).
  • Page 167 SAFETY 165 when the seat is folded flat (if equipped). It is recom- WARNING! mended that pets be restrained in the rear seat (if • Relying on the air bags alone could lead to more equipped) in pet harnesses or pet carriers that are secured by seat belts, and cargo is properly stowed.
  • Page 168 166 SAFETY WARNING! (Continued) WARNING! (Continued) whether or not an air bag is also provided at their belt as low as possible and keep it snug. • A twisted seat belt may not protect you properly. seating position to minimize the risk of severe injury or death in the event of a crash.
  • Page 169 SAFETY 167 2. The seat belt latch plate is above the back of the front WARNING! (Continued) seat, and next to your arm in the rear seat (for shoulder so that your strongest bones will take vehicles equipped with a rear seat). Grasp the latch the force in a collision.
  • Page 170 168 SAFETY Inserting Latch Plate Into Buckle Positioning The Lap Belt 3. When the seat belt is long enough to fit, insert the 4. Position the lap belt so that it is snug and lies low latch plate into the buckle until you hear a “click.” across your hips, below your abdomen.
  • Page 171 SAFETY 169 Lap/Shoulder Belt Untwisting Procedure Use the following procedure to untwist a twisted lap/ shoulder belt. 1. Position the latch plate as close as possible to the anchor point. 2. At about 6 to 12 in (15 to 30 cm) above the latch plate, grasp and twist the seat belt webbing 180 degrees to create a fold that begins immediately above the latch plate.
  • Page 172 170 SAFETY Adjustable Anchorage Up Adjustable Anchorage Down As a guide, if you are shorter than average, you will NOTE: The adjustable upper shoulder belt anchorage is prefer the shoulder belt anchorage in a lower position, equipped with an Easy Up feature. This feature allows and if you are taller than average, you will prefer the the shoulder belt anchorage to be adjusted in the shoulder belt anchorage in a higher position.
  • Page 173 SAFETY 171 Seat Belts And Pregnant Women WARNING! • Wearing your seat belt incorrectly could make your injuries in a collision much worse. You might suffer internal injuries, or you could even slide out of the seat belt. Follow these instructions to wear your seat belt safely and to keep your passengers safe, too.
  • Page 174 172 SAFETY Seat Belt Pretensioner Switchable Automatic Locking Retractors (ALR) The front seat belt system is equipped with pretension- The seat belts in the passenger seating positions are ing devices that are designed to remove slack from the equipped with a Switchable Automatic Locking Retrac- seat belt in the event of a collision.
  • Page 175 SAFETY 173 the ALR. If the ALR is activated, you will hear a clicking How To Engage The Automatic Locking Mode sound as the seat belt retracts. Allow the webbing to 1. Buckle the combination lap and shoulder belt. retract completely in this case and then carefully pull out only the amount of webbing necessary to comfort- 2.
  • Page 176: Supplemental Restraint Systems (Srs)

    174 SAFETY • Steering Wheel and Column WARNING! (Continued) • Instrument Panel • Do not use the Automatic Locking Mode to re- • Knee Impact Bolsters strain occupants who are wearing the seat belt or children who are using booster seats. The locked •...
  • Page 177 SAFETY 175 • The Air Bag Warning Light remains on after the four The ORC contains a backup power supply system that may deploy the air bag system even if the battery loses to eight-second interval. power or it becomes disconnected prior to deployment. •...
  • Page 178 176 SAFETY Redundant Air Bag Warning Light steering wheel. The passenger front air bag is mounted in the instrument panel, above the glove compartment. If a fault with the Air Bag Warning Light is detected, The words “SRS AIRBAG” or “AIRBAG” are embossed which could affect the Supplemental Re- on the air bag covers.
  • Page 179 SAFETY 177 The first stage inflator is triggered immediately during WARNING! an impact that requires air bag deployment. A low • Being too close to the steering wheel or instru- energy output is used in less severe collisions. A higher energy output is used for more severe collisions.
  • Page 180 178 SAFETY On the other hand, depending on the type and location WARNING! (Continued) of impact, front air bags may deploy in crashes with may damage the air bags and you could be little vehicle front-end damage but that produce a injured because the air bags may no longer be severe initial deceleration.
  • Page 181 SAFETY 179 Knee Impact Bolsters Supplemental Side Air Bags The Knee Impact Bolsters help protect the knees of the Your vehicle is equipped with two types of side air driver and front passenger, and position the front bags: occupants for improved interaction with the front air 1.
  • Page 182 180 SAFETY When the SAB deploys, it opens the seam on the 2. Supplemental Side Air Bag Inflatable Curtains outboard side of the seatback’s trim cover. The inflating (SABICs): Located above the side windows. The trim SAB deploys through the seat seam into the space covering the SABICs is labeled “SRS AIRBAG”...
  • Page 183 SAFETY 181 positioned in the area where the SABICs inflate. Chil- dren are at an even greater risk of injury from a deploying air bag. WARNING! • Do not stack luggage or other cargo up high enough to block the deployment of the SABICs. The trim covering above the side windows where the SABIC and its deployment path are located should remain free from any obstructions.
  • Page 184 182 SAFETY damage by itself is not a good indicator of whether or WARNING! not Side Air Bags should have deployed. • Side Air Bags need room to inflate. Do not lean Side Air Bags are a supplement to the seat belt restraint against the door or window.
  • Page 185 SAFETY 183 side impact deploys the left Side Air Bags only and a The SABICs may help reduce the risk of partial or right side impact deploys the right Side Air Bags only. complete ejection of vehicle occupants through side windows in certain rollover or side impact events.
  • Page 186 184 SAFETY If A Deployment Occurs irritation, rinse the area with cool water. For nose or throat irritation, move to fresh air. If the irritation The front air bags are designed to deflate immediately continues, see your doctor. If these particles settle on after deployment.
  • Page 187 SAFETY 185 Enhanced Accident Response System Enhanced Accident Response System Reset Procedure In the event of an impact, if the communication net- work remains intact, and the power remains intact, After the event occurs, when the system is active, a depending on the nature of the event, the ORC will message regarding fuel cutoff is displayed.
  • Page 188 186 SAFETY Customer Action Customer Will See Customer Action Customer Will See NOTE: Each step MUST BE held for at least two NOTE: Each step MUST BE held for at least two seconds seconds 1. Turn ignition STOP/ 8. Place turn signal in Right turn light is OFF.
  • Page 189 SAFETY 187 If a reset procedure step is not completed within 60 WARNING! (Continued) seconds, then the turn signal lights will blink and the may not function properly if modifications are reset procedure must be performed again in order to be made.
  • Page 190: Child Restraints

    188 SAFETY • Whether or not the driver and passenger safety belts Child Restraints were buckled/fastened; Everyone in your vehicle needs to be buckled up at all • How far (if at all) the driver was depressing the times, including babies and children. Every state in the accelerator and/or brake pedal;...
  • Page 191 SAFETY 189 There are different sizes and types of restraints for NOTE: children from newborn size to the child almost large • For additional information, refer enough for an adult safety belt. Always check the child www.safercar.gov/parents/index.htm or call: 1–888– seat Owner’s Manual to make sure you have the correct 327–4236 seat for your child.
  • Page 192 190 SAFETY Summary Of Recommendations For Restraining Children In Vehicles Child Size, Height, Weight Or Recommended Type Of Child Re- straint Infants and Toddlers Children who are two years old or Either an Infant Carrier or a Con- younger and who have not vertible Child Restraint, facing reached the height or weight limits rearward in the rear seat of the ve-...
  • Page 193 SAFETY 191 The infant carrier is only used rear-facing in the vehicle. Older Children And Child Restraints It is recommended for children from birth until they Children who are two years old or who have outgrown reach the weight or height limit of the infant carrier. their rear-facing convertible child seat can ride forward- Convertible child seats can be used either rear-facing or facing in the vehicle.
  • Page 194 192 SAFETY Children Too Large For Booster Seats WARNING! Children who are large enough to wear the shoulder • Improper installation can lead to failure of an belt comfortably, and whose legs are long enough to infant or child restraint. It could come loose in a bend over the front of the seat when their back is collision.
  • Page 195 SAFETY 193 4. Is the lap part of the belt as low as possible, touching WARNING! the child’s thighs and not their stomach? Never allow a child to put the shoulder belt under 5. Can the child stay seated like this for the whole trip? an arm or behind their back.
  • Page 196 194 SAFETY Recommendations For Attaching Child Restraints Restraint Type Combined Use Any Attachment Method Shown With An “X” Below Weight of the LATCH – Seat Belt Only LATCH – Seat Belt + Top Child + Child Lower Anchors Lower Anchors Tether Anchor Restraint Only...
  • Page 197 SAFETY 195 Lower Anchors And Tethers For CHildren these seating positions, the seat belt must be used with (LATCH) Restraint System the top tether anchorage to install the child restraint. Please see the following table for more information. LATCH Positions For Installing Child Restraints In This Vehicle LATCH Label Your vehicle is equipped with the child restraint an-...
  • Page 198 196 SAFETY Frequently Asked Questions About Installing Child Restraints With LATCH What is the weight limit (child’s 65 lbs (29.5 kg) Use the LATCH anchorage system weight + weight of the child re- until the combined weight of the straint) for using the LATCH an- child and the child restraint is chorage system to attach the child 65 lbs (29.5 kg).
  • Page 199 SAFETY 197 Frequently Asked Questions About Installing Child Restraints With LATCH Can two child restraints be at- Never “share” a LATCH anchorage tached using a common lower with two or more child restraints. LATCH anchorage? If the center position does not have dedicated LATCH lower anchor- ages, use the seat belt to install a child seat in the center position...
  • Page 200 198 SAFETY Locating The LATCH Anchorages Locating The Upper Tether Anchorages The lower anchorages are round bars that are There are tether strap anchorages behind each found at the rear of the seat cushion where it rear seating position located on the back of meets the seatback, below the anchorage the seat.
  • Page 201 SAFETY 199 the end to attach to the top tether anchorage and a way belt, following the instructions below. See the section to tighten the strap after it is attached to the anchorage. “Installing Child Restraints Using The Vehicle Seat Belt”...
  • Page 202 200 SAFETY 5. Tighten all of the straps as you push the child vehicle that the seat belts are not toys and that they restraint rearward and downward into the seat. should not play with them. Remove slack in the straps according to the child restraint manufacturer’s instructions.
  • Page 203 SAFETY 201 Lap/Shoulder Belt Systems For Installing Child WARNING! Restraints In This Vehicle • Improper installation or failure to properly secure a child restraint can lead to failure of the restraint. The child could be badly injured or killed. • Follow the child restraint manufacturer’s direc- tions exactly when installing an infant or child restraint.
  • Page 204 202 SAFETY Frequently Asked Questions About Installing Child Restraints With Seat Belts What is the weight limit (child’s Weight limit of the Child Restraint Always use the tether anchor when weight + weight of the child re- using the seat belt to install a for- straint) for using the Tether Anchor ward facing child restraint, up to with the seat belt to attach a for-...
  • Page 205 SAFETY 203 1. Place the child seat in the center of the seating 6. Try to pull the webbing out of the retractor. If it is position. For some second row seats, you may need locked, you should not be able to pull out any to recline the seat and/or raise the head restraint to webbing.
  • Page 206 204 SAFETY Installing Child Restraints Using The Top Tether 1. Look behind the seating position where you plan to Anchorage: install the child restraint to find the tether anchorage. You may need to move the seat forward to provide WARNING! better access to the tether anchorage.
  • Page 207: Transporting Pets

    SAFETY 205 WARNING! (Continued) • If your vehicle is equipped with a split rear seat, make sure the tether strap does not slip into the opening between the seatbacks as you remove slack in the strap. Transporting Pets Air Bags deploying in the front seat could harm your pet.
  • Page 208: Exhaust Gas

    206 SAFETY WARNING! WARNING! (Continued) • Do not run the engine in a closed garage or in • Do not leave children or animals inside parked confined areas any longer than needed to move vehicles in hot weather. Interior heat build-up your vehicle in or out of the area.
  • Page 209: Safety Checks You Should Make Inside The Vehicle

    SAFETY 207 In addition, inspect the exhaust system each time the illuminate with a single chime when a fault with the vehicle is raised for lubrication or oil change. Replace as Air Bag Warning Light has been detected, it will stay required.
  • Page 210 208 SAFETY WARNING! WARNING! (Continued) • ONLY use the driver’s side floor mat on the An improperly attached, damaged, folded, or driver’s side floor area. To check for interference, stacked floor mat, or damaged floor mat fasteners with the vehicle properly parked with the engine may cause your floor mat to interfere with the off, fully depress the accelerator, the brake, and accelerator, brake, or clutch pedals and cause a loss...
  • Page 211: Periodic Safety Checks You Should Make

    SAFETY 209 Lights WARNING! (Continued) Have someone observe the operation of brake lights • If the vehicle carpet has been removed and re- and exterior lights while you work the controls. Check installed, always properly attach carpet to the turn signal and high beam indicator lights on the floor and check the floor mat fasteners are secure instrument panel.
  • Page 213 STARTING AND OPERATING CONTENTS ▫ Shifting......224 STARTING THE ENGINE ....214 ▫...
  • Page 214 212 STARTING AND OPERATING ▫ Accelerating For Passing ....237 ▫ ParkSense System Usage Precautions ..249 ALL WHEEL DRIVE (AWD) — IF EQUIPPED .238 LANESENSE —...
  • Page 215 STARTING AND OPERATING 213 ▫ CNG And LP Fuel System Modifications ..263 ▫ Shallow Standing Water ....271 ▫ MMT In Gasoline ....263 POWER STEERING .
  • Page 216: Starting The Engine

    214 STARTING AND OPERATING STARTING THE ENGINE Manual Transmission Before starting your vehicle, adjust your seat, adjust the Proceed as follows: inside and outside mirrors, fasten your seat belt, and if 1. Set the Electric Park Brake (EPB) and put the gear present, instruct all other occupants to buckle their seat selector in the NEUTRAL position.
  • Page 217: Tip Start Feature

    STARTING AND OPERATING 215 4. If the engine does not start, place the ignition in the RUN mode, release the accelerator pedal and repeat the OFF mode and wait 10-15 seconds before attempting “Normal Starting” procedure. to restart the engine. WARNING! Tip Start Feature •...
  • Page 218: Cold Weather Operation

    216 STARTING AND OPERATING Extended Park Starting CAUTION! NOTE: Extended Park condition occurs when the ve- To prevent damage to the starter, do not continu- hicle has not been started or driven for at least 30 days. ously crank the engine for more than 25 seconds at 1.
  • Page 219: After Starting - Warming Up The Engine

    STARTING AND OPERATING 217 After Starting — Warming Up The Engine When the ignition is in the OFF mode, the window switches remains active for three minutes. Opening a Proceed as follows: front door will cancel this function. • Travel slowly, letting the engine run at a reduced After severe driving, idle the engine to allow the RPM, without accelerating suddenly.
  • Page 220: Electric Park Brake (Epb)

    218 STARTING AND OPERATING While cruising, brief full-throttle acceleration within the ELECTRIC PARK BRAKE (EPB) limits of local traffic laws contributes to a good break-in. Your vehicle is equipped with an Electric Park Brake Wide-open throttle acceleration in low gear can be System (EPB) that offers simple operation, and some detrimental and should be avoided.
  • Page 221 STARTING AND OPERATING 219 NOTE: The EPB fault lamp will illuminate if the EPB switch is held for longer than 20 seconds in either the released or applied position. The light will extinguish upon releasing the switch. If the Auto Park Brake feature is enabled, the EPB will automatically engage whenever the transmission is placed into PARK, or with a manual transmission, when the ignition switch is in the STOP/OFF position.
  • Page 222 220 STARTING AND OPERATING NOTE: WARNING! (Continued) • When parking on a hill, it is important to turn the • Do not leave the key fob in or near the vehicle (or front wheels toward the curb on a downhill grade in a location accessible to children), and do not and away from the curb on an uphill grade.
  • Page 223: Auto Park Brake

    STARTING AND OPERATING 221 long as engagement is desired. The brake warning lamp deactivated. In this event, urgent service of the EPB could illuminate in case of the hydraulic system is not system is required. Do not rely on the EPB to hold the available.
  • Page 224: Safehold

    222 STARTING AND OPERATING • The driver door is open. SafeHold SafeHold is a safety feature of the EPB system that will SafeHold can be temporarily bypassed by pushing the engage the park brake automatically if the vehicle is left EPB Switch while the driver door is open and the brake unsecured while the ignition switch is in the RUN pedal is pressed.
  • Page 225: Manual Transmission

    STARTING AND OPERATING 223 Service Mode has requirements that must be met in NOTE: A dedicated message will appear in the instru- order to be activated: ment cluster if Brake Service Mode cannot be deacti- vated. • The vehicle must be at a standstill. •...
  • Page 226: Shifting

    224 STARTING AND OPERATING CAUTION! Never drive with your foot resting on the clutch pedal, or attempt to hold the vehicle on a hill with the clutch pedal partially engaged, as this will cause abnormal wear on the clutch. NOTE: During cold weather, you may experience in- creased effort in shifting until the transmission fluid warms up.
  • Page 227: Downshifting

    STARTING AND OPERATING 225 Recommended Vehicle Shift Speeds vehicle speeds listed for acceleration. When heavily loaded or pulling a trailer, these recommended up-shift To utilize your manual transmission efficiently for fuel speeds may not apply. economy and performance, it should be upshifted as listed in the recommended shift speed chart.
  • Page 228: Automatic Transmission

    226 STARTING AND OPERATING Maximum Recommended Downshift Speeds CAUTION! (Continued) speeds to cause engine and clutch damage are CAUTION! significantly lower. • Failure to follow the maximum recommended Failure to follow the maximum recommended downshifting speeds may cause the engine dam- downshifting speeds may cause the engine to over- age and/or damage the clutch, even if the clutch speed and/or damage the clutch disc, even if the...
  • Page 229 STARTING AND OPERATING 227 REVERSE when the vehicle is stopped or moving at low WARNING! (Continued) speeds (refer to Brake/Transmission Shift Interlock • When leaving the vehicle, always make sure the System in this section). Select the DRIVE range for ignition is in the OFF mode, remove the key fob normal driving.
  • Page 230: Gear Selector

    228 STARTING AND OPERATING NOTE: If the gear selector cannot be moved to the CAUTION! (Continued) PARK, REVERSE, or NEUTRAL position (when pushed • Do not shift between PARK, REVERSE, NEU- forward) it is probably in the AutoStick (+/-) position TRAL, or DRIVE when the engine is above idle (beside the DRIVE position).
  • Page 231: Gear Ranges

    STARTING AND OPERATING 229 CAUTION! After selecting any gear range, wait a moment to allow the selected gear to engage before accelerat- ing. This is especially important when the engine is cold. Gear Ranges PARK (P) This range supplements the Electric Park Brake (EPB) by locking the transmission.
  • Page 232 230 STARTING AND OPERATING When exiting the vehicle, always: WARNING! (Continued) • Apply the parking brake. reverse. You could lose control of the vehicle and • Shift the transmission into PARK. hit someone or something. Only shift into gear when the engine is idling normally and your foot •...
  • Page 233 STARTING AND OPERATING 231 • Look at the transmission gear position display and WARNING! (Continued) verify that it indicates the PARK position (P), and is warned not to touch the parking brake, brake not blinking. pedal or the transmission gear selector. •...
  • Page 234 232 STARTING AND OPERATING If the transmission temperature exceeds normal operat- CAUTION! ing limits, the transmission controller may modify the transmission shift schedule, reduce engine torque, Towing the vehicle, coasting, or driving for any and/or expand the range of torque converter clutch other reason with the transmission in NEUTRAL engagement.
  • Page 235 STARTING AND OPERATING 233 and improve overall vehicle performance. This system coming to a stop. After a stop, the driver should can also provide you with more control during passing, manually upshift (+) the transmission as the vehicle city driving, cold slippery conditions, mountain driv- is accelerated.
  • Page 236: Transmission Limp Home Mode

    234 STARTING AND OPERATING AutoStick position at any time without taking your foot In the event of a momentary problem, the transmission off the accelerator pedal. can be reset to regain all forward gears by performing the following steps: WARNING! 1.
  • Page 237: Ignition Park Interlock

    STARTING AND OPERATING 235 Ignition Park Interlock The Speed Control buttons are located on the right side of the steering wheel. Vehicles Equipped With Keyless Enter-N-Go: This vehicle is equipped with an Ignition Park Inter- lock, which requires the transmission to be in PARK before the ignition can be turned to the STOP/OFF mode.
  • Page 238: Activation

    236 STARTING AND OPERATING Activation When the vehicle has reached the desired speed, push the SET (+) or SET (-) button and release. Release the Push the on/off button to activate the Speed Control. accelerator and the vehicle will operate at the selected The cruise indicator light in the instrument cluster speed.
  • Page 239: Accelerating For Passing

    STARTING AND OPERATING 237 The driver’s preferred units can be selected through the The driver’s preferred units can be selected through the Uconnect system if equipped. Refer to ”Uconnect Set- Uconnect system if equipped. Refer to ”Uconnect Set- tings” in “Multimedia” for more information. The tings”...
  • Page 240: All Wheel Drive (Awd) - If Equipped

    238 STARTING AND OPERATING ALL WHEEL DRIVE (AWD) — IF EQUIPPED This feature provides on-demand All-Wheel Drive (AWD). The system is automatic with no driver inputs or additional driving skills required. Under normal driving conditions, the front wheels provide most of the traction.
  • Page 241: Warning Messages

    STARTING AND OPERATING 239 Sport Mode – This mode is designed to increase NOTE: steering feedback to the driver with a slight increase in • Brake Control monitors the information from the effort and changes the transmission shift schedules for forward looking sensors as well as the Electronic more aggressive shifting.
  • Page 242 240 STARTING AND OPERATING could lurch forward, once the brakes release a few When the system determines a collision with the vehicle seconds later. If the Brake Control event stops the in front of you is no longer probable, the warning vehicle completely, the system will hold the vehicle at message will be deactivated.
  • Page 243: Turning Brake Control On Or Off

    STARTING AND OPERATING 241 driver is not braking adequately in the event of a WARNING! potential frontal collision, but maintains the audible and visual warnings. Brake Control is not intended to avoid a collision on its own, nor can Brake Control detect every type Changing the status of the system is only possible with of potential collision.
  • Page 244: Brake Control Limited Warning

    242 STARTING AND OPERATING a more limited and gradual. This setting gives the Service Brake Control Warning driver the maximum possible time of reaction to pre- If the system turns off, and the instrument cluster vent a possible accident. display displays: By changing the option to Near , the system will warn •...
  • Page 245: Precautions While Driving With Brake Control

    STARTING AND OPERATING 243 recover after the vehicle has left these areas. Under rare Precautions While Driving With Brake Control conditions, when the radar is not tracking any vehicles In certain driving conditions, such as: or objects in its path this warning may temporarily •...
  • Page 246 244 STARTING AND OPERATING Driving In The Vicinity Of A Curve Small Vehicles And/Or Not Aligned To The Lane Entering or exiting a large curve, the system could The system is not able to detect the presence of vehicles detect the presence of a vehicle that is in front of the car, that are in front of the car but placed outside the field of but that does not preside in the same lane.
  • Page 247 STARTING AND OPERATING 245 Lane Changing Of Other Vehicles Passing Of Vehicles In An Oncoming Intersection Vehicles that suddenly change lane, while standing in The system could temporarily react to a vehicle that the traffic lane of their car and inside the field of action crossed the range of the radar sensor, in an oncoming of the radar sensor may cause the intervention of the intersection.
  • Page 248: General Information

    246 STARTING AND OPERATING General Information PARKSENSE REAR PARK ASSIST — IF EQUIPPED This vehicle has systems that operate on radio fre- quency that comply with Part 15 of the Federal Com- The ParkSense Rear Park Assist system provides visual munications Commission (FCC) rules and with Indus- and audible indications of the distance between the rear try Canada Standards RSS- GEN/210/220/310.
  • Page 249: Parksense Sensors

    STARTING AND OPERATING 247 ParkSense Sensors Chime The four ParkSense sensors, located in the rear fascia/ By shifting the vehicle in REVERSE and in the case of bumper, monitor the area behind the vehicle that is the presence of a rear obstacle, an acoustic signal that within the sensors’...
  • Page 250: Enabling And Disabling Parksense

    248 STARTING AND OPERATING Detection Distances In general, the car is closest to the obstacle when the display shows only a flashing arc and the chime be- If the sensors detect more obstacles, it is taken into comes continuous. account only what is the shorter distance. The color on the display depends on the distance and Instrument Cluster Display location of the obstacle.
  • Page 251: Service The Rear Park Assist System

    STARTING AND OPERATING 249 ParkSense switch is pushed, and requires service, the display a dedicated message such as PARK ASSIST ParkSense switch LED will blink momentarily, and then UNAVAILABLE WIPE REAR SENSORS the LED will be on. PARKSENSE UNAVAILABLE SERVICE REQUIRED message for as long as the vehicle is in REVERSE.
  • Page 252 250 STARTING AND OPERATING • Clean the Rear ParkSense sensors regularly, taking WARNING! (Continued) care not to scratch or damage them. The sensors must Failure to do so can result in serious injury or not be covered with ice, snow, slush, mud, dirt or death.
  • Page 253: Lanesense - If Equipped

    STARTING AND OPERATING 251 When both lane markings are detected and the driver CAUTION! (Continued) unintentionally drifts out of the lane (no turn signal above or below the sensors will not be detected applied), the LaneSense system provides a haptic warn- when they are in close proximity.
  • Page 254: Turning Lanesense On Or Off

    252 STARTING AND OPERATING Turning LaneSense On Or Off The default status of LaneSense is “off”. The LaneSense button is located on the end of the turn signal stalk, located on the left side of the steering column. To turn the LaneSense system on, push the LaneSense button once.
  • Page 255 STARTING AND OPERATING 253 warnings in the instrument cluster display and a torque warning in the steering wheel if an uninten- tional lane departure occurs. Lane Approached (Flashing Yellow Thick Line, Solid Yellow Thin Line/Flashing Yellow Indicator) NOTE: The LaneSense system operates with the similar behavior for a right lane departure when only the right Lanes Sensed (White Lines/Green Indicator) lane marking has been detected.
  • Page 256: Changing Lanesense Status

    254 STARTING AND OPERATING Lane Sensed (Solid Yellow Thick Line, Solid Yellow Lane Approached (Flashing Yellow Thick Line, Solid Thin Line/Solid Yellow Indicator) Yellow Thin Line/Flashing Yellow Indicator) • When the LaneSense system senses the lane has been NOTE: The LaneSense system operates with the similar approached and is in a lane departure situation, the behavior for a right lane departure.
  • Page 257: Parkview Rear Back Up Camera - If Equipped

    STARTING AND OPERATING 255 NOTE: • When enabled the system operates above 37 mph (60 km/h) and below 112 mph (180 km/h). • Use of the turn signal suppresses the warnings. • The system will not apply torque to the steering wheel whenever a safety system engages.
  • Page 258 256 STARTING AND OPERATING A touchscreen button to disable the camera is available When enabled, fixed guide lines are overlaid on the when the vehicle is not in REVERSE. Display of the image to illustrate the width of the vehicle. camera image after shifting out of REVERSE can be Different colored zones indicate the distance to the rear disabled via Uconnect Settings.
  • Page 259: Tire Pressure Monitoring System (Tpms)

    STARTING AND OPERATING 257 pressure must not exceed the maximum inflation pres- CAUTION! sure molded into the tire sidewall. Refer to “Tires – • To avoid vehicle damage, ParkView should only General Information” in “Maintaining And Caring For Your Vehicle” for information on how to properly be used as a parking aid.
  • Page 260 258 STARTING AND OPERATING may need to be driven for up to 20 minutes above CAUTION! (Continued) 15 mph (24 km/h) in order for the TPMS to receive this operation or sensor damage may result when information. using replacement equipment that is not of the For example, your vehicle may have a recommended same size, type, and/or style.
  • Page 261: Base System

    STARTING AND OPERATING 259 • Driving on a significantly under-inflated tire causes NOTE: It is particularly important for you to check the the tire to overheat and can lead to tire failure. tire pressure in all of the tires on your vehicle regularly Under-inflation also reduces fuel efficiency and tire and to maintain the proper pressure.
  • Page 262 260 STARTING AND OPERATING • The compact spare tire does not have a tire pressure Check TPMS Warnings monitoring sensor. Therefore, the TPMS will not The Tire Pressure Monitoring Telltale Light will flash on monitor the tire pressure in the compact spare tire. and off for 75 seconds and remain on solid when a •...
  • Page 263: General Information

    STARTING AND OPERATING 261 tires. The vehicle may need to be driven for up to 20 FUEL REQUIREMENTS minutes above 15 mph (24 km/h) in order for the 1.4L Turbo Engine TPMS to receive this information. General Information This engine is designed to meet all The following regulatory statement applies to all radio emission regulations and provide frequency (RF) devices equipped in this vehicle:...
  • Page 264: 2.4L Engine

    262 STARTING AND OPERATING 2.4L Engine Reformulated Gasoline Many areas of the country require the use of cleaner All available gasoline engines are burning gasoline referred to as “Reformulated Gaso- designed to meet all emissions regu- line”. Reformulated gasoline contains oxygenates and lations and provide excellent fuel are specifically blended to reduce vehicle emissions and economy and performance when us-...
  • Page 265: E-85 Usage In Non-Flex Fuel Vehicles

    STARTING AND OPERATING 263 • Increased risk for fuel system component corrosion. CAUTION! (Continued) CNG And LP Fuel System Modifications Light” to illuminate. Please observe pump labels as they should clearly communicate if a fuel contains Modifications that allow the engine to run on com- greater than 15% ethanol (E-15).
  • Page 266: Materials Added To Fuel

    264 STARTING AND OPERATING Materials Added To Fuel Fuel System Cautions Besides using unleaded gasoline with the proper octane CAUTION! rating, gasolines that contain detergents, corrosion, and stability additives are recommended. Using gasolines Follow these guidelines to maintain your vehicle’s that have these additives will help improve fuel performance: economy, reduce emissions, and maintain vehicle per-...
  • Page 267: Carbon Monoxide Warnings

    STARTING AND OPERATING 265 NOTE: Intentional tampering with the emissions con- ADDING FUEL trol system can result in civil penalties being assessed The Capless Fuel System uses a flapper placed at the against you. filler pipe of the fuel tank; it opens and closes automati- cally upon insertion/extraction of the fuel nozzle.
  • Page 268 266 STARTING AND OPERATING 2. Insert the fuel nozzle in the filler pipe and proceed Emergency Refueling Procedure with filling the fuel tank. If the vehicle is out of fuel, proceed as follows: 1. Open the liftgate and remove the emergency fuel fill funnel located in the cargo area.
  • Page 269 STARTING AND OPERATING 267 Emergency Fuel Fill Funnel — If Equipped With Full Fueling With Emergency Fuel Fill Funnel Size Spare Tire 4. Remove the emergency fuel fill funnel, and close the 2. Open the fuel door. door. 3. Insert the emergency fuel fill funnel in the filler pipe 5.
  • Page 270: Vehicle Loading

    268 STARTING AND OPERATING (MDH) number is included on this label and indicates WARNING! the Month, Day and Hour of manufacture. The bar code • Do not affix objects/plugs to the end of the filler that appears on the bottom of the label is your VIN. neck other than is provided on the car.
  • Page 271 STARTING AND OPERATING 269 components sometimes specified by purchasers for Loading increased durability does not necessarily increase the The actual total weight and the weight of the front and vehicle’s GVWR. rear of your vehicle at the ground can best be deter- mined by weighing it when it is loaded and ready for Tire Size operation.
  • Page 272: Driving On Slippery Surfaces

    270 STARTING AND OPERATING CAUTION! WARNING! Do not load your vehicle any heavier than the Rapid acceleration on slippery surfaces is danger- GVWR or the maximum front and rear GAWR. If ous. Unequal traction can cause sudden pulling of you do, parts on your vehicle can break, or it can the front wheels.
  • Page 273: Driving Through Water

    STARTING AND OPERATING 271 3. Replace the tires when tread wear indicators first Shallow Standing Water become visible. Although your vehicle is capable of driving through shallow standing water, consider the following Cau- 4. Keep tires properly inflated. tions and Warnings before doing so. 5.
  • Page 274: Power Steering

    272 STARTING AND OPERATING CAUTION! CAUTION! (Continued) • Getting water inside your vehicle’s engine can • Always check the depth of the standing water cause it to lock up and stall out, and cause serious before driving through it. Never drive through internal damage to the engine.
  • Page 275: Trailer Towing

    STARTING AND OPERATING 273 To maintain the New Vehicle Limited Warranty cover- If the “SERVICE POWER STEERING OR age, follow the requirements and recommendations in POWER STEERING ASSIST OFF - SERVICE this manual concerning vehicles used for trailer towing. SYSTEM” message and a steering wheel icon are displayed on the instrument cluster screen, it indi- Common Towing Definitions cates that the vehicle needs to be taken to the dealer for...
  • Page 276 274 STARTING AND OPERATING Gross Combination Weight Rating (GCWR) Frontal Area The GCWR is the total allowable weight of your vehicle The frontal area is the maximum height multiplied by and trailer when weighed in combination. the maximum width of the front of a trailer. Gross Axle Weight Rating (GAWR) Trailer Sway Control —...
  • Page 277 STARTING AND OPERATING 275 Weight-Distributing Hitch WARNING! A weight-distributing system works by applying lever- • An improperly adjusted Weight Distributing age through spring (load) bars. They are typically used Hitch system may reduce handling, stability, for heavier loads to distribute trailer tongue weight to braking performance, and could result in a colli- the tow vehicle’s front axle and the trailer axle(s).
  • Page 278: Trailer Hitch Classification

    276 STARTING AND OPERATING Trailer Hitch Classification The following chart provides the industry standard for the maximum trailer weight a given trailer hitch class can tow and should be used to assist you in selecting the correct trailer hitch for your intended towing con- dition.
  • Page 279: Trailer Towing Weights (Maximum Trailer Weight Ratings)

    STARTING AND OPERATING 277 Trailer Towing Weights (Maximum Trailer Weight 1.4L Turbo Engine & 2.4 FWD Ratings) Trailer towing is not recommended. The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine Max. GTW (Gross Trailer Wt.) Max.
  • Page 280: Towing Requirements

    278 STARTING AND OPERATING Consider the following items when computing the WARNING! weight on the rear axle of the vehicle: Improper towing can lead to a collision. Follow • The tongue weight of the trailer. these guidelines to make your trailer towing as safe •...
  • Page 281 STARTING AND OPERATING 279 WARNING! (Continued) CAUTION! (Continued) in PARK. Always block or chock the trailer This helps the engine and other parts of the wheels. vehicle wear in at the heavier loads. • GCWR must not be exceeded. • Total weight must be distributed between the tow Towing Requirements —...
  • Page 282 280 STARTING AND OPERATING Towing Requirements — Trailer Brakes WARNING! • Do not interconnect the hydraulic brake system or • Do not connect trailer brakes to your vehicle’s vacuum system of your vehicle with that of the hydraulic brake lines. It can overload your brake trailer.
  • Page 283 STARTING AND OPERATING 281 Towing Requirements — Trailer Lights And The electrical connections are all complete to the vehicle Wiring (If Equipped) but you must mate the harness to a trailer connector. Refer to the following illustrations. Whenever you pull a trailer, regardless of the trailer size, stoplights and turn signals on the trailer are NOTE: required for motoring safety.
  • Page 284 282 STARTING AND OPERATING Four-Pin Connector Seven-Pin Connector 1 — Female Pins 4 — Park 1 — Battery 5 — Ground 2 — Male Pin 5 — Left Stop/Turn 2 — Backup Lamps 6 — Left Stop/Turn 3 — Ground 6 —...
  • Page 285: Towing Tips

    STARTING AND OPERATING 283 • To prevent excess heat generation, avoid continuous Towing Tips driving at high RPM. Reduce vehicle speed as nec- Before setting out on a trip, practice turning, stopping, essary to avoid extended driving at high RPM. and backing the trailer in an area located away from Return to a higher gear or vehicle speed when grade heavy traffic.
  • Page 286: Recreational Towing (Behind Motorhome, Etc.)

    284 STARTING AND OPERATING Highway Driving Air Conditioning Reduce speed. Turn off temporarily. RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Towing This Vehicle Behind Another Vehicle WHEELS OFF THE FRONT WHEEL DRIVE ALL-WHEEL DRIVE TOWING CONDITION GROUND (FWD) (AWD) Flat Tow NONE NOT ALLOWED NOT ALLOWED Dolly Tow...
  • Page 287 STARTING AND OPERATING 285 • Release the Electric Park Brake (EPB). Recreational Towing • Cycle the ignition OFF, remove the key fob, and Front-Wheel Drive (FWD) Models release the brake pedal. Recreational towing is allowed ONLY if the front wheels are OFF the ground. This may be accomplished CAUTION! using a tow dolly (front wheels off the ground) or vehicle trailer (all four wheels off the ground).
  • Page 288 286 STARTING AND OPERATING All-Wheel Drive (AWD) Models CAUTION! Recreational towing (with all four wheels on the Towing this vehicle with ANY of its wheels on the ground, or using a towing dolly) is NOT ALLOWED. ground can cause severe transmission and/or power This vehicle may be towed on a flatbed or vehicle trailer transfer unit damage.
  • Page 289 IN CASE OF EMERGENCY CONTENTS ▫ Jack Location/Spare Tire Stowage — If HAZARD WARNING FLASHERS ..289 Equipped ......315 BULB REPLACEMENT .
  • Page 290 288 IN CASE OF EMERGENCY ▫ Rear Tow Eye Installation ....339 TOWING A DISABLED VEHICLE ..334 ▫ Front Wheel Drive (FWD) Models ..335 ENHANCED ACCIDENT RESPONSE SYSTEM (EARS) .
  • Page 291: Hazard Warning Flashers

    IN CASE OF EMERGENCY 289 HAZARD WARNING FLASHERS BULB REPLACEMENT The Hazard Warning flasher switch is located on the General Information switch bank below the radio. • Before you replace a bulb, check the contacts to be sure they are not oxidized. Push the switch to turn on the Hazard Warning Flasher.
  • Page 292: Replacement Bulbs

    290 IN CASE OF EMERGENCY Replacement Bulbs Interior Bulbs Lamps Bulb Number Front Courtesy Light Front Courtesy Lights (Sun Visors) Rear Dome Light (Models Without Retractable Roof) Rear Interior Lights (Models With Retractable Roof) Interior Lights Dome Light (Glove Compartment) Exterior Bulbs Lamps Bulb Number...
  • Page 293: Replacing Exterior Bulbs

    IN CASE OF EMERGENCY 291 Replacing Exterior Bulbs Hi/Lo Beam Light Halogen Headlamps To replace the bulbs proceed as follows: 1. Open the engine compartment and remove the head- lamp bulb cap. Front Lamps 1 — Headlamps 2 — Daytime Running Lamps Headlamp Bulb Cap 3 —...
  • Page 294 292 IN CASE OF EMERGENCY 2. Rotate the headlamp bulb socket counterclockwise then pull outwards. Headlamp Bulb Connector 4. Install the new headlamp bulb making sure it is properly locked. Headlamp Bulb Socket 3. Release the locking tab on the headlamp bulb con- nector and remove the bulb and socket.
  • Page 295 IN CASE OF EMERGENCY 293 5. Install the headlamp bulb and socket; align the tabs Position Lights/Daytime Running Lights/Fog Lights and turn it clockwise making sure it is properly To replace the bulbs proceed as follows: locked. 1. Turn the front wheels completely. 2.
  • Page 296 294 IN CASE OF EMERGENCY 4. Rotate in a counterclockwise direction and remove the bulb and bulb socket. Bulb and Socket Assembly 1 — Bulb Position Light/Daytime Running Light Assembly 2 — Rotate Bulb 1 — DRL Bulb Socket 6. Insert the new bulb by pushing on it and turning it 2 —...
  • Page 297 IN CASE OF EMERGENCY 295 Front Fog Lights To replace the bulbs proceed as follows: 1. Turn the front wheels completely. 2. Use a suitable tool to remove the access door. Fog Light Assembly 4. Rotate the bulb counterclockwise, and then replace the bulb.
  • Page 298 296 IN CASE OF EMERGENCY Side Indicators on External Rear View Mirrors – If Equipped CAUTION! The procedure is described as a guideline. For the replacement of the lamp it is recommended that you contact your authorized dealer. To replace the bulb proceed as follows: 1.
  • Page 299 IN CASE OF EMERGENCY 297 5. Insert the new bulb, making sure that it is locked into To replace the bulbs proceed as follows: place 1. Open the liftgate. 6. Reinstall the socket in to the transparent lens assem- 2. Using a suitable tool remove the tail lamp housing bly.
  • Page 300 298 IN CASE OF EMERGENCY 3. Remove the rear tail lamp, sliding it toward the outside as shown. Rear Lamp Assembly 1 — Screws Tail Lamp Removal 4. Remove the screws and remove the rear tail lamp 5. Replace the bulb as necessary. holder.
  • Page 301 IN CASE OF EMERGENCY 299 9. Secure the rear tail lamp and reconnect the electrical connector. 10. Finally close the liftgate. 3th Stop Lamp The CHMSL is LED. For their replacement see your authorized dealer. License Plate Lights To replace the bulbs proceed as follows: 1.
  • Page 302: Replacing Interior Bulbs

    300 IN CASE OF EMERGENCY Replacing Interior Bulbs Front Courtesy Light To replace the bulbs proceed as follows: 1. Using a suitable tool remove the front courtesy light as shown. License Plate Light 2. Remove the bulbs from the individual side contacts. 3.
  • Page 303 IN CASE OF EMERGENCY 301 2. Release the retainer clips and bulb housing as shown. Front Courtesy Bulb Housing 4. Insert the new bulbs, making sure that they are Front Courtesy Bulb Housing properly locked. 1 — Retaining Clips 2 — Bulb Housing 5.
  • Page 304 302 IN CASE OF EMERGENCY Dome Light Vanity Mirror Dome Light Glove Compartment To replace the bulbs proceed as follows: To replace the bulb proceed as follows: 1. Lift the cover of the mirror and pull out the visor 1. Open the glove compartment. mirror light cover.
  • Page 305 IN CASE OF EMERGENCY 303 Rear Dome Light — Without Retractable Roof Dome Light To replace the bulbs proceed as follows: To replace the bulbs proceed as follows: 1. Using a suitable tool release the lamp assembly at 1. Lower the handle in the direction shown remove the both the ends.
  • Page 306 304 IN CASE OF EMERGENCY 2. Replace the bulb by removing it from the side contacts. Light Cover 3. Close the light cover over the bulb. Bulb 4. Reinstall the dome light in its correct position. 3. Insert the new bulb, locking it between the contacts. WARNING! 4.
  • Page 307: Fuses

    IN CASE OF EMERGENCY 305 WARNING! (Continued) WARNING! (Continued) account the technical characteristics can cause other material. Failure to use proper fuses may malfunctions with the risk of fire. result in serious personal injury, fire and/or prop- • Halogen lamps contain gas under pressure, in the erty damage.
  • Page 308 306 IN CASE OF EMERGENCY Also please be aware that when using power outlets for Fuse Removal extended periods of time with the engine off may result To replace a fuse use the extractor attached to the fuse in vehicle battery discharge. cover (located on the inside of the engine compartment fuse cover.
  • Page 309: Access To The Fuses

    IN CASE OF EMERGENCY 307 Access To The Fuses The fuses are grouped into four controllers located in the engine compartment, under the instrument panel and on the inside of the left side cargo trim panel. Engine Compartment Fuses/Distribution Unit The engine compartment fuse panel is located on the left side of the engine compartment.
  • Page 310 308 IN CASE OF EMERGENCY Mounting Fuse Cover and Locking Screw Proceed as follows: 1. Properly secure the fuse cover to the box, slide completely from top to bottom. 2. Fully depress the screw, using the special screw- driver supplied. 3.
  • Page 311 IN CASE OF EMERGENCY 309 Cavity Maxi Fuse Cartage Fuse Mini Fuse Description – 20 Amp Blue – Controller Power Supply Body Com- puter – 30 Amp Pink – Brake Control Elec- tronics Module 70 Amp Tan – – Electric Power- Assisted Steering 20 Amp Yellow –...
  • Page 312 310 IN CASE OF EMERGENCY Cavity Maxi Fuse Cartage Fuse Mini Fuse Description – – 5 Amp Tan Engine Control Module Power, Au- tomatic Transmis- sion – – 10 Amp Red Supply Primary 15 Amp Blue Loads (1.4L) Supply Primary Loads (2.4L) –...
  • Page 313 IN CASE OF EMERGENCY 311 Cavity Maxi Fuse Cartage Fuse Mini Fuse Description – – 15 Amp Blue Electronic Unit Sup- ply Automatic Transmission – – 30 Amp Green Heated Windshield – If Equipped – 40 Amp Green – Air Conditioning –...
  • Page 314: Body Computer Fuse Center

    312 IN CASE OF EMERGENCY Body Computer Fuse Center The controller is located at the left side of the steering column at the bottom of the instrument panel. For the fuse replacement see your authorized dealer. Body Controller Fuse Cavities...
  • Page 315 IN CASE OF EMERGENCY 313 Cavity Mini Fuse Description 7.5 Amp Brown Fan Air Conditioning, Power Socket 20 Amp Yellow Power Window Front (Passenger Side) 20 Amp Yellow Power Window Front (Driver’s Side) 15 Amp Blue Supply Uconnect System, Air Conditioning, USB Port, Rear lateral ceiling light in case of open roof, EOBD port 10 Amp Red System Power Forward Collision Warning Plus, All Wheel Drive (AWD), IPC,...
  • Page 316: Rear Cargo Fuse/Relay Distribution Unit

    314 IN CASE OF EMERGENCY Rear Cargo Fuse/Relay Distribution Unit Push on the left side of the access door to unhinge and remove. To access the fuses, remove the access door from the left rear panel of the rear cargo area. Rear Cargo Fuse Cavities Access Door Location Cavity...
  • Page 317: Jacking And Tire Changing

    IN CASE OF EMERGENCY 315 JACKING AND TIRE CHANGING Jack Location/Spare Tire Stowage — If Equipped WARNING! The jack and tools are located in the rear storage compartment if equipped, inside a special container. • Do not attempt to change a tire on the side of the vehicle close to moving traffic.
  • Page 318 316 IN CASE OF EMERGENCY 2. Lift the access cover using the load floor handle. 3. Remove the fastener securing the spare tire. Load Floor Handle Spare Tire Fastener...
  • Page 319: Preparations For Jacking

    IN CASE OF EMERGENCY 317 4. Remove the jack, wheel bolt wrench, and wheel WARNING! chocks. A loose tire or jack thrown forward in a collision or hard stop could endanger the occupants of the vehicle. Always stow the jack parts and the spare tire in the places provided.
  • Page 320: Jacking Instructions

    318 IN CASE OF EMERGENCY 5. Turn the ignition to STOP mode. WARNING! (Continued) 6. Chock both the front and rear of the wheel diago- • Never start or run the engine with the vehicle on nally opposite of the jacking posi- a jack.
  • Page 321 IN CASE OF EMERGENCY 319 3. Before raising the vehicle, use the wheel bolt wrench to loosen, but not remove the wheel bolts on the wheel with the flat tire. Turn the wheel bolts coun- terclockwise one turn while the wheel is still on the ground.
  • Page 322 320 IN CASE OF EMERGENCY Jacking Locations Front Jacking Engagement Point Front Jacking Location Rear Jacking Location...
  • Page 323 IN CASE OF EMERGENCY 321 CAUTION! Be sure to mount the spare tire with the valve stem facing outward. The vehicle could be damaged if the spare tire is mounted incorrectly. Rear Jacking Engagement Point 5. Raise the vehicle just enough to remove the flat tire. WARNING! Raising the vehicle higher than necessary can make the vehicle less stable.
  • Page 324: Road Tire Installation

    322 IN CASE OF EMERGENCY NOTE: Refer to “Torque Specifications” in “Technical Data” for the proper lug bolt torque. If in doubt about the • Your vehicle may be equipped with a compact correct tightness, have them checked with a torque spare tire or a limited —...
  • Page 325: Tire Service Kit Storage

    IN CASE OF EMERGENCY 323 6. After 25 miles (40 km) check the wheel bolt torque WARNING! with a torque wrench to ensure that all wheel bolts are properly seated against the wheel. To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully until the vehicle TIRE SERVICE KIT STORAGE has been lowered.
  • Page 326: Tire Service Kit - If Equipped

    324 IN CASE OF EMERGENCY Tire Service Kit — If Equipped Remove the Tire Service Kit from the vehicle, take it out from the bag and place it near the punctured tire. Screw the clear flexible filling tube to the tire valve. WARNING! •...
  • Page 327 IN CASE OF EMERGENCY 325 Insert the power plug into the vehicle power outlet WARNING! (Continued) socket. Start the vehicle engine. • A loose Tire Service Kit thrown forward in a Push the Tire Service Kit power button to the “I” collision or hard stop could endanger the occu- position.
  • Page 328 326 IN CASE OF EMERGENCY WARNING! Tire Service Kit is not a permanent flat tire repair. Have the tire inspected and repaired or replaced after using Tire Service Kit. Do not exceed 65 mph (110 km/h) until the tire is repaired or replaced. Failure to follow this warning can result in injuries that are serious or fatal to you, your passengers, and others around you.
  • Page 329: Jump Starting

    IN CASE OF EMERGENCY 327 JUMP STARTING Preparations For Jump Start If your vehicle has a discharged battery it can be The battery in your vehicle is located in the front of the jump-started using a set of jumper cables and a battery engine compartment, behind the left headlight assem- in another vehicle or by using a portable battery booster bly.
  • Page 330: Jump Starting Procedure

    328 IN CASE OF EMERGENCY 3. If using another vehicle to jump start the battery, WARNING! park the vehicle within the jumper cables reach, set • Take care to avoid the radiator cooling fan when- the parking brake and make sure the ignition is OFF. ever the hood is raised.
  • Page 331 IN CASE OF EMERGENCY 329 Connecting The Jumper Cables 5. Start the engine in the vehicle that has the booster battery, let the engine idle a few minutes, and then 1. Connect the positive (+) end of the jumper cable to start the engine in the vehicle with the discharged the positive (+) post of the discharged vehicle.
  • Page 332: Refueling In Emergency

    330 IN CASE OF EMERGENCY CAUTION! CAUTION! Accessories plugged into the vehicle power outlets Driving with a hot cooling system could damage draw power from the vehicle’s battery, even when your vehicle. If the temperature gauge reads “H,” not in use (i.e., cellular devices, etc.). Eventually, if pull over and stop the vehicle.
  • Page 333: Gear Selector Override

    IN CASE OF EMERGENCY 331 WARNING! You or others can be badly burned by hot engine coolant (antifreeze) or steam from your radiator. If you see or hear steam coming from under the hood, do not open the hood until the radiator has had time to cool.
  • Page 334: Freeing A Stuck Vehicle

    332 IN CASE OF EMERGENCY 4. Push and maintain firm pressure on the brake pedal. FREEING A STUCK VEHICLE If your vehicle becomes stuck in mud, sand or snow, it 5. Insert a small screwdriver or similar tool down into can often be moved using a rocking motion.
  • Page 335 IN CASE OF EMERGENCY 333 NOTE: Push the ESC Off switch (if necessary), to CAUTION! place the Electronic Stability Control (ESC) system in • Racing the engine or spinning the wheels may Partial Off mode, before rocking the vehicle. Refer to “Electronic Brake Control”...
  • Page 336: Towing A Disabled Vehicle

    334 IN CASE OF EMERGENCY TOWING A DISABLED VEHICLE This section describes procedures for towing a disabled vehicle using a commercial towing service. Towing Condi- Wheels OFF FWD MODELS ALL WHEEL DRIVE tion The Ground Flat Tow NONE NOT ALLOWED NOT ALLOWED Wheel Lift Or Rear...
  • Page 337: Front Wheel Drive (Fwd) Models

    IN CASE OF EMERGENCY 335 If you must use the accessories (wipers, defrosters, etc.) Front Wheel Drive (FWD) Models while being towed, the ignition must be in the RUN The manufacturer recommends towing your vehicle position. with all four wheels OFF the ground using a flatbed. NOTE: The Safehold feature will engage the Electric If flatbed equipment is not available, this vehicle must Park Brake whenever the driver’s door is opened (if the...
  • Page 338: Tow Eye Usage - If Equipped

    336 IN CASE OF EMERGENCY CAUTION! • DO NOT tow this vehicle with ANY of its wheels on the ground. Damage to the drivetrain will result. • Front or rear wheel lifts must not be used. Inter- nal damage to the transmission or power transfer unit will occur if a front or rear wheel lift is used when towing.
  • Page 339 IN CASE OF EMERGENCY 337 • Do not use the tow eye to free a stuck vehicle. Refer to “Freeing A Stuck Vehicle” in this section for further information. WARNING! Stand clear of vehicles when pulling with tow eyes. • Do not use a chain with a tow eye. Chains may break, causing serious injury or death.
  • Page 340: Front Tow Eye Installation

    338 IN CASE OF EMERGENCY CAUTION! (Continued) • In compliance with the above conditions, towing with a tow eye must take place with two vehicles (one towing, the other towed) aligned as much as possible along the same center line. Damage to your vehicle may occur if these guidelines are not followed.
  • Page 341: Rear Tow Eye Installation

    IN CASE OF EMERGENCY 339 Rear Tow Eye Installation The rear tow eye receptacle is located behind a access door on the rear bumper fascia. To install the tow eye, open the access door using the vehicle key or a small screwdriver, and thread the tow eye into the receptacle.
  • Page 342: Enhanced Accident Response System (Ears)

    340 IN CASE OF EMERGENCY ENHANCED ACCIDENT RESPONSE SYSTEM EVENT DATA RECORDER (EDR) (EARS) This vehicle is equipped with an Event Data Recorder This vehicle is equipped with an Enhanced Accident (EDR). The main purpose of an EDR is to record data Response System.
  • Page 343 MAINTAINING AND CARING FOR YOUR VEHICLE CONTENTS ▫ Body Lubrication ....360 EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS ......343 ▫...
  • Page 344 342 MAINTAINING AND CARING FOR YOUR VEHICLE ▫ Tire Terminology And Definitions ..384 ▫ Life Of Tire ......395 ▫...
  • Page 345: Emissions Inspection And Maintenance Programs

    MAINTAINING AND CARING FOR YOUR VEHICLE 343 EMISSIONS INSPECTION AND MAINTENANCE NOTE: If you crank or start the engine, you will have to PROGRAMS start this test over. In some localities, it may be a legal requirement to pass 2. As soon as you cycle the ignition to the ON mode, an inspection of your vehicle’s emissions control sys- you will see the “Malfunction Indicator Light (MIL)”...
  • Page 346: Replacement Parts

    344 MAINTAINING AND CARING FOR YOUR VEHICLE OBD II system to update. A recheck with the above test NOTE: Intentional tampering with emissions control routine may then indicate that the system is now ready. systems may void your warranty and could result in civil penalties being assessed against you.
  • Page 347 MAINTAINING AND CARING FOR YOUR VEHICLE 345 Operating Conditions can cause the change oil message Severe Duty All Models to illuminate as early as 3,500 miles (5,600 km) since last Change Engine Oil at 4,000 miles (6,500 km) if the reset.
  • Page 348: Maintenance Chart

    346 MAINTAINING AND CARING FOR YOUR VEHICLE Once A Month Or Before A Long Trip: Maintenance Chart • Check engine oil level. Required Maintenance Intervals • Check windshield washer fluid level. At Every Oil Change Interval As Indicated By Oil •...
  • Page 349 MAINTAINING AND CARING FOR YOUR VEHICLE 347 Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Check tire condition/wear and adjust pressure, if necessary, • • • • • • • • • • • • • • •...
  • Page 350 348 MAINTAINING AND CARING FOR YOUR VEHICLE Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Visually inspect condition of: exterior bodywork, underbody protection, pipes and hoses • • • • • • • (exhaust - fuel system - brakes), rubber elements (boots, sleeves, bushings, etc.).
  • Page 351 MAINTAINING AND CARING FOR YOUR VEHICLE 349 Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Check the front suspension, • • • • • • • tie rods, CV joints and replace if necessary. Visual inspect the condition of •...
  • Page 352 350 MAINTAINING AND CARING FOR YOUR VEHICLE Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Replace spark plugs (2.4L • engine). ** • • • • • Replace engine air filter. # Replace brake fluid every two •...
  • Page 353 MAINTAINING AND CARING FOR YOUR VEHICLE 351 Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Flush and replace the engine coolant at 10 years or • • 150,000 miles (240,000 km) whichever comes first. Replace the timing belt (1.4L •...
  • Page 354 352 MAINTAINING AND CARING FOR YOUR VEHICLE ** The spark plug change is distance based only, yearly WARNING! intervals do not apply. The following are essential to • You can be badly injured working on or around a ensure correct operation and prevent serious damage to the engine: motor vehicle.
  • Page 355: Engine Compartment - 1.4L Turbo Engine

    MAINTAINING AND CARING FOR YOUR VEHICLE 353 ENGINE COMPARTMENT — 1.4L TURBO ENGINE 1 — Air Cleaner Filter 4 — Brake Fluid Reservoir 7 — Washer Fluid Reservoir 2 — Engine Oil Dipstick 5 — Battery 8 — Coolant Pressure Bottle Cap 3 —...
  • Page 356: Engine Compartment - 2.4L Engine

    354 MAINTAINING AND CARING FOR YOUR VEHICLE ENGINE COMPARTMENT — 2.4L ENGINE 1 — Engine Air Cleaner Filter 4 — Brake Fluid Reservoir 7 — Washer Fluid Reservoir 2 — Engine Oil Dipstick 5 — Battery 8 — Coolant Pressure Bottle Cap 3 —...
  • Page 357: Engine Oil

    MAINTAINING AND CARING FOR YOUR VEHICLE 355 to check the engine oil level is approximately five CAUTION! minutes after a fully warmed engine is shut off. Do not • Failure to properly maintain your vehicle or per- check oil level before starting the engine after it has sat overnight.
  • Page 358 356 MAINTAINING AND CARING FOR YOUR VEHICLE Change Engine Oil Engine Oil Viscosity (SAE Grade) — 1.4L Turbo Engine The oil change indicator system will remind you that it is time to take your vehicle in for scheduled mainte- Mopar SAE 5W-40 synthetic engine oil is recommended nance.
  • Page 359: Engine Oil Filter

    MAINTAINING AND CARING FOR YOUR VEHICLE 357 dyes) to the engine oil. Engine oil is an engineered Engine Air Cleaner Filter product and its performance may be impaired by Refer to the “Maintenance Schedule” for the proper supplemental additives. maintenance intervals. Disposing Of Used Engine Oil And Oil Filters WARNING! Care should be taken in disposing of used engine oil...
  • Page 360: Maintenance-Free Battery

    358 MAINTAINING AND CARING FOR YOUR VEHICLE Maintenance-Free Battery WARNING! (Continued) Your vehicle is equipped with a maintenance-free bat- • The battery in this vehicle has a vent hose that tery. You will never have to add water, nor is periodic should not be disconnected and should only be maintenance required.
  • Page 361 MAINTAINING AND CARING FOR YOUR VEHICLE 359 include cleaning of the condenser fins and a perfor- CAUTION! mance test. Drive belt tension should also be checked at this time. Do not use chemical flushes in your air condition- ing system as the chemicals can damage your air WARNING! conditioning components.
  • Page 362: Body Lubrication

    360 MAINTAINING AND CARING FOR YOUR VEHICLE Body Lubrication soft cloth and a mild nonabrasive cleaner. This will remove accumulations of salt, waxes, or road film, and Locks and all body pivot points, including such items as help reduce streaking and smearing. seat tracks, door hinge pivot points and rollers, liftgate, tailgate, decklid, sliding doors and hood hinges, should Operation of the wipers on dry glass for long periods...
  • Page 363 MAINTAINING AND CARING FOR YOUR VEHICLE 361 To enable the Service Position Strategy, the wipers must NOTE: When turning the ignition ON, the blades will be in the Park position before placing the ignition in the go into the parking position. OFF mode.
  • Page 364: Adding Washer Fluid

    362 MAINTAINING AND CARING FOR YOUR VEHICLE 4. Install the wiper blade and firmly push the wiper WARNING! blade until it snaps into place. Commercially available windshield washer sol- Rear Wiper Blade Removal/Installation vents are flammable. They could ignite and burn 1.
  • Page 365 MAINTAINING AND CARING FOR YOUR VEHICLE 363 WARNING! CAUTION! (Continued) condition. In the event of engine malfunction, • Exhaust gases can injure or kill. They contain particularly involving engine misfire or other carbon monoxide (CO), which is colorless and apparent loss of performance, have your vehicle odorless.
  • Page 366: Cooling System

    364 MAINTAINING AND CARING FOR YOUR VEHICLE To minimize the possibility of catalytic converter dam- WARNING! (Continued) age: pressure cap when the radiator or coolant bottle is • Do not shut off the engine or interrupt the ignition, hot. when the transmission is in gear and the vehicle is in •...
  • Page 367 MAINTAINING AND CARING FOR YOUR VEHICLE 365 flushed and refilled with fresh engine coolant (anti- CAUTION! freeze). Check the front of the A/C condenser for any • Mixing of engine coolant (antifreeze) other than accumulation of bugs, leaves, etc. If dirty, clean by gently spraying water from a garden hose vertically specified Organic Additive Technology (OAT) engine coolant (antifreeze), may result in engine...
  • Page 368 366 MAINTAINING AND CARING FOR YOUR VEHICLE Adding Coolant that meets the requirements of FCA Material Stan- dard MS.90032 and distilled water. Use higher con- Your vehicle has been built with an improved engine centrations (not to exceed 70%) if temperatures below coolant (OAT coolant conforming to MS.90032) that −34°F (−37°C) are anticipated.
  • Page 369 MAINTAINING AND CARING FOR YOUR VEHICLE 367 If HOAT and OAT coolant are mixed in an emer- WARNING! (Continued) gency, have a authorized dealer drain, flush, and • Do not use a pressure cap other than the one refill with OAT coolant (conforming to MS.90032) as specified for your vehicle.
  • Page 370: Brake System

    368 MAINTAINING AND CARING FOR YOUR VEHICLE • If frequent engine coolant (antifreeze) additions are As long as the engine operating temperature is satisfac- tory, the coolant bottle need only be checked once a required, the cooling system should be pressure month.
  • Page 371 MAINTAINING AND CARING FOR YOUR VEHICLE 369 NOTE: If your vehicle is equipped with a manual WARNING! transmission, the brake fluid reservoir supplies fluid to both the brake system and the clutch release system. Riding the brakes can lead to brake failure and The two systems are separated in the reservoir, and a possibly a collision.
  • Page 372: Manual Transmission - If Equipped

    370 MAINTAINING AND CARING FOR YOUR VEHICLE WARNING! (Continued) CAUTION! original factory installed hydraulic master cylin- Use of improper brake fluids will affect overall der reservoir. clutch system performance. Improper brake fluids • To avoid contamination from foreign matter or may damage the clutch system resulting in loss of moisture, use only new brake fluid or fluid that clutch function and the ability to shift the transmis-...
  • Page 373: Automatic Transmission - If Equipped

    MAINTAINING AND CARING FOR YOUR VEHICLE 371 Frequency Of Fluid Change CAUTION! Under normal operating conditions, the fluid installed Using a transmission fluid other than the manufac- at the factory will give satisfactory lubrication for the turer’s recommended fluid may cause deterioration life of the vehicle.
  • Page 374: Appearance Care And Protection From

    372 MAINTAINING AND CARING FOR YOUR VEHICLE Fluid Level Check Routine fluid and filter changes are not required. How- ever, change the fluid and filter if the fluid becomes The fluid level is preset at the factory and does not contaminated (with water, etc.), or if the transmission is require adjustment under normal operating conditions.
  • Page 375 MAINTAINING AND CARING FOR YOUR VEHICLE 373 • Avoid using abrasive compounds and power buffing What Causes Corrosion? that may diminish the gloss or thin out the paint Corrosion is the result of deterioration or removal of finish. paint and protective coatings from your vehicle. The most common causes are: CAUTION! •...
  • Page 376 374 MAINTAINING AND CARING FOR YOUR VEHICLE • If you detect any stone chips or scratches in the paint, Your wheels are susceptible to deterioration caused by touch them up immediately. The cost of such repairs salt, sodium chloride, magnesium chloride, calcium is considered the responsibility of the owner.
  • Page 377 MAINTAINING AND CARING FOR YOUR VEHICLE 375 prevent damage to the wheels. Mopar Wheel Treatment Dark Vapor Or Black Satin Chrome Wheels or Mopar Chrome Cleaner or their equivalent is recom- mended or select a non-abrasive, non-acidic cleaner for CAUTION! aluminum or chrome wheels.
  • Page 378 376 MAINTAINING AND CARING FOR YOUR VEHICLE • For grease stains, apply Mopar Multi-Purpose leather conditioner is not required to maintain the Cleaner to a clean, damp cloth and remove stain. Use original condition. a fresh, damp towel to remove soap residue. WARNING! •...
  • Page 379 MAINTAINING AND CARING FOR YOUR VEHICLE 377 Cleaning Headlights When cleaning the rear view mirror, spray cleaner on the towel or cloth that you are using. Do not spray Your vehicle has plastic headlights that are lighter and cleaner directly on the mirror. less susceptible to stone breakage than glass headlights.
  • Page 380 378 MAINTAINING AND CARING FOR YOUR VEHICLE Cleaning Plastic Instrument Cluster Lenses Replace the belts if they appear frayed or worn or if the buckles do not work properly. The lenses in front of the instruments in this vehicle are molded in clear plastic.
  • Page 381: Raising The Vehicle

    MAINTAINING AND CARING FOR YOUR VEHICLE 379 RAISING THE VEHICLE The vehicle lifting points on the vehicle are marked on side skirts with symbols ( see example shown). In the case where it is necessary to raise the vehicle, go to an authorized dealer or service station.
  • Page 382: Tire Safety Information

    380 MAINTAINING AND CARING FOR YOUR VEHICLE TIRE SAFETY INFORMATION NOTE: • P (Passenger) — Metric tire sizing is based on U.S. Tire Markings design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designa- tion.
  • Page 383 MAINTAINING AND CARING FOR YOUR VEHICLE 381 • Temporary spare tires are designed for temporary • High flotation tire sizing is based on U.S. design emergency use only. Temporary high pressure com- standards and it begins with the tire diameter pact spare tires have the letter “T”...
  • Page 384 382 MAINTAINING AND CARING FOR YOUR VEHICLE EXAMPLE: Service Description: 95 = Load Index – A numerical code associated with the maximum load a tire can carry H = Speed Symbol – A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions –...
  • Page 385: Tire Identification Number (Tin)

    MAINTAINING AND CARING FOR YOUR VEHICLE 383 Tire Identification Number (TIN) tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the TIN is The TIN may be found on one or both sides of the tire; not found on the outboard side, then you will find it on however, the date code may only be on one side.
  • Page 386: Tire Terminology And Definitions

    384 MAINTAINING AND CARING FOR YOUR VEHICLE Tire Terminology And Definitions Term Definition B-Pillar The vehicle B-Pillar is the structural member of the body located behind the front door. Cold tire inflation pressure is defined as the tire pressure after Cold Tire Inflation Pressure the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after sitting for a minimum of three...
  • Page 387 MAINTAINING AND CARING FOR YOUR VEHICLE 385 WARNING! • Overloading of your tires is dangerous. Overload- ing can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. •...
  • Page 388 386 MAINTAINING AND CARING FOR YOUR VEHICLE Tire And Loading Information Placard Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tire size, and cold tire inflation pressures specified on the Tire and Load- ing Information placard in “Vehicle Loading”...
  • Page 389 MAINTAINING AND CARING FOR YOUR VEHICLE 387 Steps For Determining Correct Load Limit— Consult this manual to determine how this reduces the available cargo and luggage load capacity of your (1) Locate the statement “The combined weight of vehicle. occupants and cargo should never exceed XXX kg or XXX lbs.”...
  • Page 390 388 MAINTAINING AND CARING FOR YOUR VEHICLE WARNING! Overloading of your tires is dangerous. Overload- ing can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them.
  • Page 391: Tires - General Information

    MAINTAINING AND CARING FOR YOUR VEHICLE 389 TIRES — GENERAL INFORMATION WARNING! (Continued) Tire Pressure • Overinflated or underinflated tires can affect ve- hicle handling and can fail suddenly, resulting in Proper tire inflation pressure is essential to the safe and loss of vehicle control.
  • Page 392: Tire Inflation Pressures

    390 MAINTAINING AND CARING FOR YOUR VEHICLE • Inspect tires for signs of tire wear or visible damage. Fuel Economy Underinflated tires will increase tire rolling resistance CAUTION! resulting in higher fuel consumption. After inspecting or adjusting the tire pressure, Tread Wear always reinstall the valve stem cap.
  • Page 393: Tire Pressures For High Speed Operation

    MAINTAINING AND CARING FOR YOUR VEHICLE 391 Example: If garage temperature = 68°F (20°C) and the WARNING! outside temperature = 32°F (0°C) then the cold tire inflation pressure should be increased by 3 psi (21 kPa), High speed driving with your vehicle under maxi- which equals 1 psi (7 kPa) for every 12°F (7°C) for this mum load is dangerous.
  • Page 394: Tire Types

    392 MAINTAINING AND CARING FOR YOUR VEHICLE Tire Repair the tire sidewall. Use all season tires only in sets of four; failure to do so may adversely affect the safety and If your tire becomes damaged, it may be repaired if it handling of your vehicle.
  • Page 395: Run Flat Tires - If Equipped

    MAINTAINING AND CARING FOR YOUR VEHICLE 393 Snow Tires Run Flat Tires — If Equipped Some areas of the country require the use of snow tires Run Flat tires allow you the capability to drive 50 miles during the Winter. Snow tires can be identified by a (80 km) at 50 mph (80 km/h) after a rapid loss of “mountain/snowflake”...
  • Page 396: Tire Spinning

    394 MAINTAINING AND CARING FOR YOUR VEHICLE Tread Wear Indicators CAUTION! Tread wear indicators are in the original equipment Because of the reduced ground clearance, do not tires to help you in determining when your tires should take your vehicle through an automatic car wash be replaced.
  • Page 397: Life Of Tire

    MAINTAINING AND CARING FOR YOUR VEHICLE 395 tread is worn to the tread wear indicators, the tire WARNING! (Continued) should be replaced. Refer to “Replacement Tires” in this follow this warning can result in sudden tire fail- section for further information. ure.
  • Page 398 396 MAINTAINING AND CARING FOR YOUR VEHICLE See the Tire Sizing Chart example found in the “Tire WARNING! (Continued) Safety Information” section of this manual for more unpredictable handling and stress to steering and information relating to the Load Index and Speed suspension components.
  • Page 399: Tire Chains (Traction Devices)

    MAINTAINING AND CARING FOR YOUR VEHICLE 397 TIRE CHAINS (TRACTION DEVICES) CAUTION! Use of traction devices require sufficient tire-to-body To avoid damage to your vehicle or tires, observe clearance. Follow these recommendations to guard the following precautions: against damage. • Because of restricted traction device clearance •...
  • Page 400: Department Of Transportation Uniform Tire Quality Grades

    398 MAINTAINING AND CARING FOR YOUR VEHICLE DEPARTMENT OF TRANSPORTATION UNIFORM Traction Grades TIRE QUALITY GRADES The Traction grades, from highest to lowest, are AA, The following tire grading categories were estab- A, B, and C. These grades represent the tire’s ability lished by the National Highway Traffic Safety Ad- to stop on wet pavement, as measured under con- ministration.
  • Page 401: Tire Rotation Recommendations

    MAINTAINING AND CARING FOR YOUR VEHICLE 399 tires must meet under the Federal Motor Vehicle Refer to the “Maintenance Plan” in this section for the Safety Standard No. 109. Grades B and A represent proper maintenance intervals. The reasons for any rapid higher levels of performance on the laboratory test or unusual wear should be corrected prior to rotation wheel, than the minimum required by law.
  • Page 402: Storing The Vehicle

    400 MAINTAINING AND CARING FOR YOUR VEHICLE STORING THE VEHICLE If the vehicle should remain stationary for more than a month, observe the following precautions: • Park your vehicle in a covered, dry and possibly airy location the windows open slightly. •...
  • Page 403 MAINTAINING AND CARING FOR YOUR VEHICLE 401 across dirty surfaces. Do not use plastic sheeting CAUTION! which will not allow the evaporation of moisture present on the surface of the vehicle. Before removal of the positive and negative termi- nals to the battery, wait at least a minute with •...
  • Page 405 TECHNICAL DATA CONTENTS VEHICLE IDENTIFICATION NUMBER ..404 FLUIDS, LUBRICANTS, AND GENUINE PARTS ......408 WHEEL AND TIRE TORQUE ▫...
  • Page 406: Vehicle Identification Number

    404 TECHNICAL DATA VEHICLE IDENTIFICATION NUMBER The chassis number (VIN) and stamped on the plate illustrated in, located on the left front corner of the instrument panel cover, visible from the outside vehicle through the windshield. Vehicle Identification Number (VIN) The stamp includes: •...
  • Page 407: Torque Specifications

    TECHNICAL DATA 405 Torque Specifications Lug Nut/Bolt Torque **Lug Nut/ Lug Nut/ Bolt Size Bolt Socket Size 89 Ft-Lbs (120 N·m) M12 x 1.25 x 17 mm 25.5 **Use only your authorized dealer recommended lug nuts/bolts and clean or remove any dirt or oil before tightening.
  • Page 408 406 TECHNICAL DATA Tighten the lug nuts/bolts in a star pattern until each After 25 miles (40 km) check the lug nut/bolt torque to nut/bolt has been tightened twice. be sure that all the lug nuts/bolts are properly seated against the wheel. WARNING! To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully until the vehicle...
  • Page 409: Fluid Capacities

    TECHNICAL DATA 407 FLUID CAPACITIES Metric Fuel (Approximate) 1.4L Turbo/2.4L Engine 12.7 Gallons 48 Liters Engine Oil With Filter 1.4L Turbo Engine (SAE 5W-40 Synthetic, API Certified) 4.0 Quarts 3.8 Liters 2.4L Engine (SAE 0W-20, API Certified) 5.5 Quarts 5.2 Liters Cooling System * 1.4L Turbo Engine (Mopar Antifreeze/Engine Coolant 10 5.5 Quarts...
  • Page 410: Fluids, Lubricants, And Genuine Parts

    408 TECHNICAL DATA FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant We recommend you use Mopar Antifreeze/Coolant 10 Year/ 150,000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of FCA Material Stan- dard MS.90032.
  • Page 411: Chassis

    TECHNICAL DATA 409 Chassis Component Fluid, Lubricant, or Genuine Part Manual Transmission – If Equipped We recommend you use Mopar C Series Manual & Dual Dry Clutch Transmission Fluid. Automatic Transmission – If Equipped Use only Mopar ZF 8&9 Speed ATF Automatic Trans- mission Fluid, or equivalent.
  • Page 413 MULTIMEDIA CONTENTS ▫ Regulatory And Safety Information ..447 CYBERSECURITY..... .412 UCONNECT SETTINGS ....413 VOICE RECOGNITION QUICK TIPS .
  • Page 414: Cybersecurity

    412 MULTIMEDIA CYBERSECURITY WARNING! Your vehicle may be a connected vehicle and may be • It is not possible to know or to predict all of the equipped with both wired and wireless networks. possible outcomes if your vehicle’s systems are These networks allow your vehicle to send and receive breached.
  • Page 415: Uconnect Settings

    MULTIMEDIA 413 NOTE: UCONNECT SETTINGS • FCA or your dealer may contact you directly regard- The Uconnect system uses a combination of buttons on ing software updates. the touchscreen and buttons on the faceplate located on the center of the instrument panel that allow you to •...
  • Page 416 414 MULTIMEDIA Uconnect 5.0 Buttons On The Touchscreen And Buttons Uconnect 6.5 NAV Buttons On The Touchscreen And On The Faceplate Buttons On The Faceplate 1 — Uconnect Buttons On The Touchscreen 1 — Uconnect Buttons On The Touchscreen 2 — Uconnect Buttons On The Faceplate 2 —...
  • Page 417: Buttons On The Faceplate

    MULTIMEDIA 415 Buttons On The Faceplate Uconnect system allows you to access programmable features that may be equipped such as Display, Buttons on the faceplate are located below, and beside Units, Voice, Clock & Date, Safety/Assistance, the Uconnect system in the center of the instrument Lights, Doors &...
  • Page 418 416 MULTIMEDIA Display After pressing the “Display” button on the touchscreen, the following settings will be available: Setting Name Selectable Options Display Mode Auto Manual Brightness – Language English Español Français Touchscreen Beep Units After pressing the “Units” button on the touchscreen, you may select each unit of measure independently displayed in the instrument cluster display.
  • Page 419 MULTIMEDIA 417 After pressing the “Custom” button with “Units” on the touchscreen, you may select from the following menu items: Setting Name Selectable Options Distance Fuel Consumption MPG (US) MPG (UK) L/100 km km/L Pressure Temperature °C °F Voice After pressing the “Voice” button on the touchscreen, the following settings will be available: Setting Name Selectable Options...
  • Page 420 418 MULTIMEDIA Clock & Date After pressing the “Clock & Date” button on the touch- screen, the following settings will be available: Setting Name Selectable Options Set Time & Format 12 hour 24 hour NOTE: Press the corresponding arrow above and below the current time to adjust, then select “AM” or “PM.” Show Time Status Set Date Up Arrow Button...
  • Page 421 MULTIMEDIA 419 Safety/Assistance After pressing the “Safety/Assistance” button on the touchscreen, the following settings will be available: Setting Name Selectable Options ParkView Backup Cam- era Delay — If Equipped NOTE: When the vehicle is shifted out of REVERSE (with camera delay turned off), the rear camera mode is exited and the navigation or audio screen appears again.
  • Page 422 420 MULTIMEDIA Setting Name Selectable Options NOTE: When this feature is enabled, fixed (static) grid lines are overlaid on the Rear Backup Camera image to illustrate the width of the vehicle. Forward Collision Near Warning-Plus (FCW+) — If Equipped NOTE: The Front Collision Warning (FCW+) feature can be set to Far, or set to Near. The default status of FCW+ is the Far setting.
  • Page 423 MULTIMEDIA 421 Setting Name Selectable Options Front ParkSense Volume Medium High — If Equipped Rear ParkSense Volume Medium High — If Equipped Rear ParkSense Braking Assist — If Equipped NOTE: When this feature is selected, the park assist system will detect objects located behind the vehicle and utilize autonomous braking to stop the vehicle.
  • Page 424 422 MULTIMEDIA Setting Name Selectable Options Blind Spot Alert — If Lights Lights & Chime Equipped NOTE: • When this feature is selected, the Blind Spot Alert feature can be set to Off, Lights or Lights and Chime. The Blind Spot Alert feature can be activated in Lights mode. When this mode is selected, the Blind Spot Monitor (BSM) system is activated and will only show a visual alert in the outside mirrors.
  • Page 425 MULTIMEDIA 423 Lights After pressing the “Lights” button on the touchscreen, the following settings will be available: Setting Name Selectable Options Headlight Sensitiv- NOTE: The greater the sensitivity set, the less the external light variation required to turn on the lights (e.g. with a set- ting on level 3 at sunset the headlights turn on earlier than in levels 1 and 2).
  • Page 426 424 MULTIMEDIA Setting Name Selectable Options Cornering Lights Flash Lights With Lock — If Equipped Doors & Locks After pressing the “Doors & Locks” button on the touchscreen, the following settings will be available: Setting Name Selectable Options Auto Door Locks NOTE: When this feature is selected, all doors will lock automatically when the vehicle reaches a speed of 12 mph (20 km/h).
  • Page 427 MULTIMEDIA 425 Setting Name Selectable Options Passive Entry Remote Door Unlock/ Driver Door Unlock NOTE: When “Driver” is selected, only the driver’s door will unlock on the first push of the key fob unlock button, you must push the key fob unlock button twice to unlock the passenger’s doors. When “All” is selected, all of the doors will unlock on the first press of the key fob unlock button.
  • Page 428 426 MULTIMEDIA Audio After pressing the “Audio” button on the touchscreen, the following settings will be available: Setting Name Selectable Options Equalizer – NOTE: Bass/Mid/Treble allow you to simply slide your finger up or down to change the setting as well as press directly on the desired setting.
  • Page 429 MULTIMEDIA 427 Phone/Bluetooth After pressing the “Phone/Bluetooth” button on the touchscreen, the following settings will be available: Setting Name Selectable Options Paired Phones This feature shows which phones are paired to the Phone/Bluetooth sys- tem. For further information, refer to the Uconnect Owner’s Manual Supplement SiriusXM Setup —...
  • Page 430 428 MULTIMEDIA Setting Name Selectable Options Channel Skip Channel Skip NOTE: SiriusXM can be programmed to designate a group of channels that are the most desirable to listen to or to exclude undesirable channels while scanning. To make your selection, press the “Channel Skip” button on the touchscreen, select the channels you would like to skip.
  • Page 431 MULTIMEDIA 429 Restore Settings After pressing the “Restore Settings” button on the touchscreen, the following settings will be available: Setting Name Selectable Options Restore Settings Cancel NOTE: When this feature is selected, it will reset all settings to their default settings. To restore the settings to their de- fault setting, press the “Restore Settings”...
  • Page 432: Customer Programmable Features - Uconnect

    430 MULTIMEDIA Customer Programmable Features — Uconnect When making a selection, press the button on the 6.5 NAV Settings touchscreen to enter the desired mode. Once in the desired mode, press and release the preferred setting Press the Settings button to display the menu setting and make your selection.
  • Page 433 MULTIMEDIA 431 Display After pressing the “Display” button on the touchscreen, the following settings will be available: Setting Name Selectable Options Display Mode Auto Manual NOTE: When Day or Night is selected for the Display Mode, the usage of the Parade Mode feature will cause the radio to activate the Display Brightness Day control even though the headlights are on.
  • Page 434 432 MULTIMEDIA Units After pressing the “Units” button on the touchscreen, you may select each unit of measure independently displayed in the instrument cluster display. The follow- ing selectable units of measure are listed below: Setting Name Selectable Options Metric NOTE: When US is selected, Distance is set on miles, Fuel Consumption is set on MPG (US), Pressure is set on psi, and Temperature is set on °F.
  • Page 435 MULTIMEDIA 433 Voice After pressing the “Voice” button on the touchscreen, the following settings will be available: Setting Name Selectable Options Voice Response Length Brief Detailed Show Command List Always With Help Never Clock After pressing the “Clock” button on the touchscreen, the following settings will be available: Setting Name Selectable Options...
  • Page 436 434 MULTIMEDIA Safety & Driving Assistance After pressing the “Safety & Driving Assistance” button on the touchscreen, the following settings will be avail- able: Setting Name Selectable Options Forward Collision Near Medium Warning-Plus (FCW+) — If Equipped NOTE: The Front Collision Warning (FCW+) feature can be set to Far, Medium, or Near. The default status of FCW+ is the Far setting.
  • Page 437 MULTIMEDIA 435 Setting Name Selectable Options LaneSense Warning — If Early Late Equipped NOTE: When this feature is selected, it sets the distance at which the steering wheel will provide feedback for potential lane departures. LaneSense Strength — If Medium High Equipped NOTE: When this feature is selected, it sets the strength of the steering wheel feedback for potential lane depar-...
  • Page 438 436 MULTIMEDIA Setting Name Selectable Options NOTE: • When this feature is selected, the Blind Spot Alert feature can be set to Off, Lights or Lights and Chime. The Blind Spot Alert feature can be activated in Lights mode. When this mode is selected, the Blind Spot Monitor (BSM) system is activated and will only show a visual alert in the outside mirrors.
  • Page 439 MULTIMEDIA 437 Setting Name Selectable Options ParkView Backup Cam- era Delay NOTE: When the vehicle is shifted out of REVERSE (with camera delay turned off), the rear camera mode is exited and the navigation or audio screen appears again. When the vehicle is shifted out of REVERSE (with camera delay turned on), the rear view image will be displayed for up to 10 seconds after shifting out of “RE- VERSE”...
  • Page 440 438 MULTIMEDIA Lights After pressing the “Lights” button on the touchscreen, the following settings will be available. Setting Name Selectable Options Headlight Sensitiv- NOTE: The greater the sensitivity set, the less the external light variation required to turn on the lights (e.g. with a set- ting on level 3 at sunset the headlights turn on earlier than in levels 1 and 2).
  • Page 441 MULTIMEDIA 439 Setting Name Selectable Options Flash Lights With Lock — If Equipped Headlights With Wipers — If Equipped Doors & Locks After pressing the “Doors & Locks” button on the touchscreen, the following settings will be available: Setting Name Selectable Options Auto Door Lock NOTE: When this feature is selected, all doors will lock automatically when the vehicle reaches a speed of...
  • Page 442 440 MULTIMEDIA Setting Name Selectable Options Remote Door Unlock Driver NOTE: This feature will allow you to program your remote door locks to open “All” or only the “Driver” with the first push of the key fob or grabbing the Passive Entry door handle. Passive Entry NOTE: This feature allows you to lock and unlock the vehicles door(s) without having to press the key fob lock or unlock buttons.
  • Page 443 MULTIMEDIA 441 Engine Off Options After pressing the “Engine Off Options” button on the touchscreen, the following settings will be available: Setting Name Selectable Options Radio Off Delay 0 MIN 20 MIN Headlight Off Delay — If – Equipped NOTE: When this feature is selected, the driver can choose to have the headlights remain on for 0, 30, 60, or 90 seconds when exiting the vehicle.
  • Page 444 442 MULTIMEDIA Setting Name Selectable Options Speed Adjusted Volume Surround Sound — If Equipped Loudness — If Equipped AUX Volume Off- set — If Equipped Auto-On Radio Recall Last NOTE: The Radio automatically turns on when vehicle is in run or will recall whether it was on or off at last ignition off.
  • Page 445 MULTIMEDIA 443 SiriusXM Setup — If Equipped After pressing the “SiriusXM Setup” button on the touchscreen, the following settings will be available: Setting Name Selectable Options SXM Tune Start NOTE: The “Tune Start” feature begins playing the current song from the beginning when you tune to a music channel using one of the twelve presets, so you can enjoy the complete song.
  • Page 446 444 MULTIMEDIA Setting Name Selectable Options Subscription Information Subscription Info NOTE: New vehicle purchasers or lessees will receive a free limited time subscription to SiriusXM Satellite Radio with your radio. Following the expiration of the free services, it will be necessary to access the information on the Subscription Information screen to re-subscribe.
  • Page 447: Uconnect Radios

    MULTIMEDIA 445 Clear Personal Data After pressing the “Clear Personal Data Settings” but- ton on the touchscreen, the following settings will be available: Setting Name Selectable Options Clear Personal Data NOTE: When this feature is selected, it will remove personal data including Bluetooth devices and presets. UCONNECT RADIOS For detailed information about your Uconnect radio, refer to your Uconnect Owner’s Manual Supplement.
  • Page 448: Steering Wheel Audio Controls

    446 MULTIMEDIA Located below the heating ventilation and air condi- STEERING WHEEL AUDIO CONTROLS tioning controls is the front USB port and AUX jack. The remote sound system controls are located at the rear of the steering wheel. Reach behind the wheel to Refer to the Uconnect Owner’s Manual Supplement for access the switches.
  • Page 449: Radio Operation

    MULTIMEDIA 447 AUX/Media Player, etc.) and can also be used to If you push the switch up or down twice, it plays the select/enter an item while scrolling through menu. second track; three times, it will play the third, etc. The left-hand control is a rocker-type switch with a RADIO OPERATION AND MOBILE DEVICES pushbutton in the center.
  • Page 450 448 MULTIMEDIA The internal wireless radio operates within guidelines NOTE: found in radio frequency safety standards and recom- • This equipment has been tested and found to comply mendations, which reflect the consensus of the scientific with the limits for a Class B digital device, pursuant community.
  • Page 451: Voice Recognition Quick Tips

    MULTIMEDIA 449 VOICE RECOGNITION QUICK TIPS Introducing Uconnect Start using Uconnect Voice Recognition with these helpful quick tips. It provides the key Voice Commands and tips you need to know to control your Uconnect 5.0 or 6.5 NAV system. Uconnect 6.5 NAV Key Features: •...
  • Page 452: Get Started

    450 MULTIMEDIA Get Started All you need to control your Uconnect system with your voice are the buttons on your steering wheel. 1. Visit UconnectPhone.com to check mobile device and feature compatibility and to find phone pair- ing instructions. 2. Reduce background noise. Wind and passenger con- versations are examples of noise that may impact recognition.
  • Page 453: Basic Voice Commands

    MULTIMEDIA 451 Basic Voice Commands The basic Voice Commands below can be given at any point while using your Uconnect system. Push the VR button . After the beep, say • Cancel to stop a current voice session. • Help to hear a list of suggested Voice Commands. •...
  • Page 454: Media

    452 MULTIMEDIA TIP: At any time, if you are not sure of what to say or want to learn a Voice Command, press the VR button and say “Help.” The system will provide you with a list of commands. Uconnect 6.5A NAV Radio Media Uconnect offers connections via USB Port, Bluetooth and Auxiliary Ports (If Equipped).
  • Page 455: Phone

    MULTIMEDIA 453 • Play artist Beethoven; Play album Greatest Hits; Play song Moonlight Sonata; Play genre Classical. TIP: Press the Browse button on the touchscreen to see all of the music on your iPod or USB device. Your Voice Command must match exactly how the artist, album, song and genre information is displayed.
  • Page 456: Voice Text Reply

    454 MULTIMEDIA • Call back (call previous incoming phone number). TIP: When providing a Voice Command, push the Phone button and say “Call,” then pronounce the name exactly as it appears in your phone book. When a contact has multiple phone numbers, you can say “Call John Smith work.”...
  • Page 457: Navigation (6.5 Nav)

    MULTIMEDIA 455 1. To enter a destination, push the VR button . After PRE-DEFINED VOICE TEXT REPLY RESPONSES the beep, say: Yes. Stuck in traffic. See you later. • For the 6.5 NAV Uconnect System, say: “Navigate Start without I’ll be late. to 800 Chrysler Drive Auburn Hills, Michigan.”...
  • Page 458: Siri Eyes Free - If Equipped

    456 MULTIMEDIA Siri Eyes Free — If Equipped Getting Started Siri lets you use your voice to send text messages, select Ensure Siri is enabled On Your iPhone. media, place phone calls and much more. Siri uses your natural language to understand what you mean and will respond back to confirm your requests.
  • Page 459 MULTIMEDIA 457 2. After the double beep, begin speaking to Siri. Examples of Siri commands and questions: • Play Rolling Stones • Send text message to John • Read text message from Sarah • Take me to the nearest coffee shop NOTE: •...
  • Page 460: General Information

    458 MULTIMEDIA General Information Additional Information This device complies with FCC rules Part 15 and © 2016 FCA US LLC. All rights reserved. Mopar and Industry Canada RSS-210. Operation is subject to the Uconnect are registered trademarks and Mopar Owner following two conditions: Connect is a trademark of FCA US LLC.
  • Page 461 INDEX...
  • Page 462 460 INDEX About Your Brakes ..... . .154 Air Pressure, Tires......390 Adding Engine Coolant (Antifreeze) .
  • Page 463 INDEX 461 Axle Lubrication ......409 Chains, Tire ......397 Changing A Flat Tire .
  • Page 464 462 INDEX Clutch Fluid ......369 Daytime Running Lights ....68 Coin Holder .
  • Page 465 INDEX 463 Electronic Roll Mitigation ....161 Oil Filter ......357 Traction Control System .
  • Page 466 464 INDEX Fluid Leaks ......209 General Maintenance..... .354 Fluids, Lubricants And Genuine Parts .
  • Page 467 INDEX 465 Holder, Coin......115 Keyless Entry ......38 Holder, Cup .
  • Page 468 466 INDEX Light Bulbs ......209 Tire Pressure Monitoring (TPMS) ...144 Lights .
  • Page 469 INDEX 467 Mirrors ....... .57 Oil Pressure Light ......137 Heated .
  • Page 470 468 INDEX Radio Operation ......447 Replacement Tires ......395 Rain Sensitive Wiper System .
  • Page 471 INDEX 469 Seat Belt Maintenance .....378 Service Contract ......10 Seat Belt Reminder .
  • Page 472 470 INDEX Steering Wheel Audio Controls ....446 Jacking ......315, 379 Steering Wheel Mounted Sound System Controls .
  • Page 473 INDEX 471 Traction Control ......159 Passive Entry Programming ....439 Trailer Towing .
  • Page 474 472 INDEX Wind Buffeting..... . .100, 102 Window Fogging ......96 Windows .
  • Page 475 INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this The antenna cable should be as short as practical and vehicle’s electronic system to provide immunity to radio routed away from the vehicle wiring when possible. Use frequency signals. Mobile two-way radios and telephone only fully shielded coaxial cable.
  • Page 476 17FB-126-AB ©2016 FCA US LLC. All Rights Reserved. FIAT is a registered trademark of FCA Group Second Edition First Edition Marketing S.p.A., used under license by FCA US LLC. Printed in U.S.A.

Table of Contents

Save PDF