Fiat 500X 2019 Owner's Manual

page of 468

/ 468
Contents
Table of Contents
Bookmarks

Table of Contents

Quick Links

Download this manual

FIAT

500X

2 0 1 9

O W N E R ' S M A N U A L

Table of Contents

Chapters

Table of Contents

Summary of Contents for Fiat 500X 2019

Page 1 ® FIAT 500X 2 0 1 9 O W N E R ’ S M A N U A L...
Page 2 VEHICLES SOLD IN CANADA This manual illustrates and describes the operation of With respect to any Vehicles Sold in Canada, the name features and equipment that are either standard or op- FCA US LLC shall be deemed to be deleted and the name tional on this vehicle.
Page 3 TABLE OF CONTENTS SECTION PAGE INTRODUCTION ..............3 GRAPHICAL TABLE OF CONTENTS .
Page 5: Table Of Contents
INTRODUCTION CONTENTS INTRODUCTION ......4 ROLLOVER WARNING .....5 HOW TO USE THIS MANUAL .
Page 6: Introduction
4 INTRODUCTION INTRODUCTION This Owner’s Manual describes all versions of this vehicle. Options and equipment dedicated to specific markets or Dear Customer, versions are not expressly indicated in the text. Therefore, Congratulations on selecting your new vehicle. Be assured you should only consider the information which is related that it represents precision workmanship, distinctive styl- to the trim level, engine, and version that you have ing, and high quality.
Page 7: Rollover Warning
INTRODUCTION HOW TO USE THIS MANUAL manner, all vehicles can go out of control. Because of the higher center of gravity, if this vehicle is out of control it Essential Information may roll over while some other vehicles may not. Consult the Table of Contents to determine which section Do not attempt sharp turns, abrupt maneuvers, or other contains the information you desire.
Page 8: Warnings And Cautions
6 INTRODUCTION VEHICLE MODIFICATIONS/ALTERATIONS belts could cut the highway death toll by 10,000 or more each year and could reduce disabling injuries by two million annually. In a rollover crash, an unbelted person is WARNING! significantly more likely to die than a person wearing a seat Any modifications or alterations to this vehicle could belt.
Page 9 GRAPHICAL TABLE OF CONTENTS CONTENTS FRONT VIEW ......8 INSTRUMENT PANEL .....10 REAR VIEW .
Page 10: Graphical Table Of Contents
8 GRAPHICAL TABLE OF CONTENTS FRONT VIEW Front View 1 — Engine Compartment 4 — Exterior Mirrors 2 — Headlights 5 — Doors 3 — Windshield 6 — Wheels...
Page 11: Rear View
GRAPHICAL TABLE OF CONTENTS 9 REAR VIEW Rear View 1 — Rear Lights 2 — Rear Windshield Wiper 3 — Liftgate...
Page 12: Instrument Panel
10 GRAPHICAL TABLE OF CONTENTS INSTRUMENT PANEL Instrument Panel 1 — Multifunction Lever 6 — Uconnect System 2 — Instrument Cluster Display Controls 7 — Upper Switch Panel 3 — Instrument Cluster 8 — Climate Controls 4 — Speed Controls 9 —...
Page 13: Interior
GRAPHICAL TABLE OF CONTENTS 11 INTERIOR Interior Features 1 — Door Locks 5 — Gear Selector 2 — Door Handles 6 — Upper Glove Compartment 3 — Window Switches 7 — Lower Glove Compartment 4 — Seats...
Page 15 GETTING TO KNOW YOUR VEHICLE CONTENTS ▫ Remote Start Windshield Wiper De–Icer And Rear KEYS ....... . .17 Defrost Activation —...
Page 16 14 GETTING TO KNOW YOUR VEHICLE ▫ Central Lock/Unlock .....32 MIRRORS ......52 ▫...
Page 17 GETTING TO KNOW YOUR VEHICLE 15 ▫ Front Fog Lights — If Equipped ... . .58 WINDOWS ......86 ▫...
Page 18 16 GETTING TO KNOW YOUR VEHICLE ▫ Cigar Lighter — If Equipped ....103 INTERNAL EQUIPMENT ....99 ▫...
Page 19: Keys
GETTING TO KNOW YOUR VEHICLE 17 KEYS Key Fob With Remote Control The key fob with Remote Control contains a Remote Keyless Entry feature. The Remote Keyless Entry system allows you to lock or unlock the doors and liftgate or activate the Panic Alarm from distances up to approxi- mately 66 ft (20 m) using a handheld key fob.
Page 20 18 GETTING TO KNOW YOUR VEHICLE To Unlock The Doors And Liftgate NOTE: If the vehicle is equipped with Passive Entry, refer to “Keyless Enter-N-Go — Passive Entry” located in Push and release the unlock button on the key fob once to “Doors”...
Page 21 GETTING TO KNOW YOUR VEHICLE 19 Replacing The Battery In The Key With Remote Control The recommended replacement battery is one CR2032 battery. NOTE: • Perchlorate Material — special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate for fur- ther information. • Do not touch the battery terminals that are on the back housing or the printed circuit board.
Page 22 20 GETTING TO KNOW YOUR VEHICLE 2. Separate the key fob halves using the tip of the emer- gency key, a #2 flat blade screwdriver, or a coin and gently pry the two halves of the key fob apart. Make sure not to damage the seal during removal.
Page 23 GETTING TO KNOW YOUR VEHICLE 21 Request For Additional Key Fobs NOTE: Only key fobs that are programmed to the vehicle electronics can be used to start and operate the vehicle. Once a key fob is programmed to a vehicle, it cannot be programmed to any other vehicle.
Page 24: Ignition Switch
22 GETTING TO KNOW YOUR VEHICLE General Information NOTE: If the ignition switch does not change with the push of a button, the key fob may have a low or dead The following regulatory statement applies to all radio battery. In this situation, a back up method can be used to frequency (RF) devices equipped in this vehicle: operate the ignition switch.
Page 25 GETTING TO KNOW YOUR VEHICLE 23 The push button ignition can be placed in the following WARNING! (Continued) positions: • Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others • The engine is stopped. could be seriously or fatally injured.
Page 26: Remote Starting System - If Equipped
24 GETTING TO KNOW YOUR VEHICLE REMOTE STARTING SYSTEM — IF EQUIPPED All of the following conditions must be met before the engine will remote start: • Gear Selector in PARK This system uses the key fob to start the engine conveniently from outside the vehicle while still •...
Page 27: Remote Start Cancel Message - If Equipped
GETTING TO KNOW YOUR VEHICLE 25 To Enter Remote Start Mode WARNING! (Continued) Push and release the Remote Start button on the key fob (CO) which is odorless and colorless. Carbon Monox- twice within five seconds. The vehicle doors will lock, the ide is poisonous and can cause serious injury or death turn signals will flash twice, and the horn will chirp twice.
Page 28: To Exit Remote Start Mode And Drive The Vehicle
26 GETTING TO KNOW YOUR VEHICLE Remote Start Windshield Wiper De–Icer And Rear NOTE: To avoid unintentional shut downs, the system will Defrost Activation — If Equipped disable the one time push of the remote start button for two seconds after receiving a valid remote start request. When remote start is active and the outside ambient To Exit Remote Start Mode And Drive The Vehicle temperature is less than 40°F (4.4°C), the Windshield Wiper...
Page 29: Sentry Key
GETTING TO KNOW YOUR VEHICLE 27 NOTE: Changes or modifications not expressly approved indicates that someone used an invalid key fob to start the by the party responsible for compliance could void the engine. Either of these conditions will result in the engine user’s authority to operate the equipment.
Page 30: Replacement Keys
28 GETTING TO KNOW YOUR VEHICLE Replacement Keys General Information The following regulatory statement applies to all radio NOTE: Only key fobs that are programmed to the vehicle frequency (RF) devices equipped in this vehicle: electronics can be used to start and operate the vehicle. Once a key fob is programmed to a vehicle, it cannot be This device complies with Part 15 of the FCC Rules and programmed to any other vehicle.
Page 31: Vehicle Security Alarm - If Equipped
GETTING TO KNOW YOUR VEHICLE 29 VEHICLE SECURITY ALARM — IF EQUIPPED • Push the lock button on the exterior Passive Entry Door Handle with a valid key fob available in the same The vehicle security alarm monitors the vehicle doors, exterior zone (refer to Doors in Getting To Know hood, liftgate, and the Keyless Enter-N-Go —...
Page 32: Disabling
30 GETTING TO KNOW YOUR VEHICLE • The vehicle security alarm remains armed during lift- Disabling gate entry. If someone enters the vehicle through the To completely disable the alarm (e.g. in the case of long liftgate and opens any door, the alarm will sound. inactivity of the car), lock the doors by turning the vehicle •...
Page 33 GETTING TO KNOW YOUR VEHICLE 31 WARNING! (Continued) • Never leave children alone in a vehicle, or with access to an unlocked vehicle. • Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured.
Page 34: Getting To Know Your Vehicle
32 GETTING TO KNOW YOUR VEHICLE Central Lock/Unlock The doors can also be locked and unlocked with the Keyless Enter-N-Go (Passive Entry) system if equipped. A power door lock switch is located on each of the front For further information, refer to “Keyless Enter-N-Go” in door trim panels.
Page 35 GETTING TO KNOW YOUR VEHICLE 33 • If the vehicle is unlocked by the Passive Entry Door Handle, and no door goes ajar within 60 seconds, the vehicle will re-lock and if equipped, the security alarm will arm. • The key fob may not be detected by the vehicle passive entry system if it is located next to a mobile phone, laptop, or other electronic device;...
Page 36 34 GETTING TO KNOW YOUR VEHICLE To Unlock From The Passenger Side With a valid Passive Entry key fob within 5 ft (1.5 m) of the passenger door handle, grab the front passenger door handle to unlock all four doors and the liftgate automati- cally.
Page 37 GETTING TO KNOW YOUR VEHICLE 35 Preventing Inadvertent Locking Of Passive Entry Key Fob In Vehicle (FOBIK-Safe) To minimize the possibility of unintentionally locking a Passive Entry key fob inside your vehicle, the Passive Entry system is equipped with an automatic door unlock feature. FOBIK-Safe only executes in vehicles with Passive Entry.
Page 38 36 GETTING TO KNOW YOUR VEHICLE NOTE: The vehicle will only unlock the doors when a valid Passive Entry key fob is detected inside the vehicle, and no valid Passive Entry key fob is detected outside the vehicle. The vehicle will not unlock the doors when any of the following conditions are met: •...
Page 39 GETTING TO KNOW YOUR VEHICLE 37 WARNING! • Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be severely injured or killed.
Page 40 38 GETTING TO KNOW YOUR VEHICLE While the vehicle is moving, if the liftgate is closed Activation/Deactivation Of Keyless Enter-N-Go properly, it will lock automatically when the vehicle Keyless Enter-N-Go can be activated or deactivated reaches a speed of 12.5 mph (20 km/h) or over. This feature through the instrument cluster display or through the can be disabled using the instrument cluster.
Page 41: Child Locks
GETTING TO KNOW YOUR VEHICLE 39 Child Locks NOTE: • When the child lock system is engaged, the door can To provide a safer environment for small children riding in only be opened by using the outside door handle even the rear seats, the rear doors are equipped with a Child- though the inside door lock is in the unlocked position.
Page 42: Seats
40 GETTING TO KNOW YOUR VEHICLE SEATS Manual Adjustment (Front Seats) Seats are a part of the Occupant Restraint System of the WARNING! vehicle. • Adjusting a seat while the vehicle is moving is WARNING! dangerous. The sudden movement of the seat could cause you to lose control.
Page 43: Manual Adjustment (Rear Seats)
GETTING TO KNOW YOUR VEHICLE 41 While sitting in the seat, lift up on the bar and move the Height Adjustment seat forward or rearward. Release the bar once you have The front driver and passenger seats height can be raised reached the desired position.
Page 44 42 GETTING TO KNOW YOUR VEHICLE Manual Folding Second Row Seat Removing Shelf — If Equipped The manual folding split rear seat increases the storage of Proceed as follows: the rear cargo area. 1. Disconnect the two links that support the shelf at the NOTE: eyelets.
Page 45 GETTING TO KNOW YOUR VEHICLE 43 4. The rear shelf can be stored in the cargo area, or behind the front seatbacks. Partial Enlargement Of Cargo Area Enlargement of the left side of the cargo area allows you to carry a single passenger on the right side of the rear seat, while the enlargement of the right side allows you to carry two passengers.
Page 46 44 GETTING TO KNOW YOUR VEHICLE Seatback Repositioning NOTE: If interference from the cargo area prevents the seatback from fully locking, you will have difficulty return- ing the seat to its proper position. 1. Move the safety belts to the seat belt guides on the top edge of the seat to ensure the seatbacks properly latch.
Page 47: Power Adjustment Front Seats - If Equipped
GETTING TO KNOW YOUR VEHICLE 45 Power Adjustment Front Seats — If Equipped Forward Or Rearward Adjustment The power seat controls are located on the outboard side of The seat can be adjusted both forward and rearward. Push the seat, close to the floor. the seat switch forward or rearward, the seat will move in the direction of the switch.
Page 48: Heated Seats - If Equipped
46 GETTING TO KNOW YOUR VEHICLE Heated Seats — If Equipped Recline Adjustment Push the seat recliner switch forward or rearward, the The heated seat switches are located on the instrument seatback will move in the direction of the switch. Release panel.
Page 49: Head Restraints
GETTING TO KNOW YOUR VEHICLE 47 HEAD RESTRAINTS Auto On Comfort — If Equipped If the external temperature is below 40 °F (4.4 °C) at each Head restraints are designed to reduce the risk of injury by start-up of the vehicle the heated seat functionality of the restricting head movement in the event of a rear impact.
Page 50: Front Adjustment
48 GETTING TO KNOW YOUR VEHICLE Front Adjustment Rear Adjustment Your vehicle is equipped with driver and passenger head Your vehicle is equipped with two outboard head restraints restraints. and one center head restraint for its rear passengers. The rear head restraints can be raised or lowered. When the To raise the head restraint, pull upward on the head center seat is being occupied, the head restraint should be restraint.
Page 51: Front Removal
GETTING TO KNOW YOUR VEHICLE 49 Front Removal To remove the head restraint recline the backrest of the seat to avoid interference with the roof. Raise the head restraint as far as it can go then push the release button and adjustment button at the base of each post while pulling the head restraint up.
Page 52: Rear Removal
50 GETTING TO KNOW YOUR VEHICLE Rear Removal STEERING WHEEL Tilt/Telescoping Steering Column To remove the head restraint, raise it as far as it can go then push the release button and adjustment button at the base This feature allows you to tilt the steering column upward of each post while pulling the head restraint up.
Page 53: Heated Steering Wheel - If Equipped
GETTING TO KNOW YOUR VEHICLE 51 To unlock the steering column, push the tilt/telescoping steering wheel can shut off early or may not turn on lever downward (toward the floor). To tilt the steering when the steering wheel is already warm. The heated column, move the steering wheel upward or downward as steering wheel control button is located on the center of desired.
Page 54: Mirrors
52 GETTING TO KNOW YOUR VEHICLE MIRRORS Electrochromic Mirror — If Equipped Inside Day/Night Mirror This mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or off by The mirror can be adjusted up, down, left, and right. The pushing the button at the base of the mirror.
Page 55: Outside Mirrors
GETTING TO KNOW YOUR VEHICLE 53 Outside Mirrors • Once the mirror is adjusted, rotate the control to the neutral position to avoid accidental movements. To receive maximum benefit, adjust the outside mirror(s) to • The power mirror switches will remain active for up to center on the adjacent lane of traffic with a slight overlap of the view obtained on the inside mirror.
Page 56: Folding Mirror
54 GETTING TO KNOW YOUR VEHICLE Folding Mirror ignition in the ON/RUN position, and for three minutes after the ignition is turned OFF. This feature will disable if The exterior mirrors are hinged to allow the mirror to pivot either front door is opened. forward or rearward to help avoid damage.
Page 57: Heated Mirrors - If Equipped
GETTING TO KNOW YOUR VEHICLE 55 • If the exterior mirrors were auto-folded, they will unfold when the ignition is turned ON. • If the exterior mirrors were manually folded, they will not automatically unfold. The Automatic Power Folding Mirrors feature can be activated/deactivated through the Uconnect Settings.
Page 58: Daytime Running Lights (Drl) - If Equipped
56 GETTING TO KNOW YOUR VEHICLE The DRLs will be disabled during turn signal operation and resume operation when the turn signal operation has ended. High Beams To turn on the high beam headlights, push the turn signal lever forward (toward the front of the vehicle) and an indicator will illuminate in the cluster.
Page 59: Flash-To-Pass
GETTING TO KNOW YOUR VEHICLE 57 Flash-To-Pass The timing of the headlights is adjustable between 0, 30, 60 and 90 seconds. Refer to “Uconnect Settings” in “Multime- You can signal another vehicle with your headlights by dia” for further information. lightly pulling the multifunction lever toward you.
Page 60: Front Fog Lights - If Equipped
58 GETTING TO KNOW YOUR VEHICLE • If the ignition is turned OFF with the fog lights on, they If you shut off the lights before the ignition is turned on, they will turn off in the normal manner. will remain on when the ignition is turned back ON. Turn Signals NOTE: The lights must be turned off within two minutes of placing the ignition in STOP mode to activate this...
Page 61: Interior Lights
GETTING TO KNOW YOUR VEHICLE 59 When the vehicle is unlocked, the low beam headlights, parking lights, and sidemarkers will turn on for 25 sec- onds. Once a door is opened, the lights will remain on for an additional ten seconds, then automatically turn off. The lights can also be turned off by: •...
Page 62 60 GETTING TO KNOW YOUR VEHICLE NOTE: The dome light will turn off under any of the following conditions: • Before exiting the vehicle, make sure that the interior • The dome light is disabled when the ignition is placed in lights are turned off.
Page 63 GETTING TO KNOW YOUR VEHICLE 61 Rear Dome Light — If Equipped Push the switch on the rear dome light once to turn the light on, the light will remain on at all times. Push the switch a second time to turn the light off, the lights will remain off until a door is opened.
Page 64 62 GETTING TO KNOW YOUR VEHICLE With the parking lights or headlights on, rotate the instru- Vehicles With Retractable Roof ment panel dimmer control upward or downward to For vehicles equipped with a retractable roof, there are two increase or decrease the brightness of the instrument panel. interior lights located below the grab handles of the rear At the top detent of the instrument panel dimmer, all the doors.
Page 65: Cargo Area Lights
GETTING TO KNOW YOUR VEHICLE 63 Cargo Area Lights WIPERS AND WASHERS Front Wiper Operation An interior light is located on the left side panel in the cargo area. The windshield wiper/washer controls are located on the This light automatically turn on/off when the liftgate is lever on the right side of the steering column.
Page 66 64 GETTING TO KNOW YOUR VEHICLE CAUTION! WARNING! Always remove any buildup of snow that prevents the Sudden loss of visibility through the windshield could windshield wiper blades from returning to the “park” lead to a collision. You might not see other vehicles or position.
Page 67: Rain Sensor - If Equipped
GETTING TO KNOW YOUR VEHICLE 65 Rain Sensor — If Equipped This feature senses moisture on the windshield and auto- matically activates the wipers for the driver. The feature is especially useful for road splash or overspray from the windshield washers of the vehicle ahead. Rotate the end of the multifunction lever to one of two settings to activate this feature.
Page 68 66 GETTING TO KNOW YOUR VEHICLE • The Rain Sensing feature may not function properly Remote Start Mode Inhibit — On vehicles equipped with when ice, or dried salt water is present on the wind- Remote Starting system, Rain Sensing wipers are not shield.
Page 69: Rear Window Wiper/Washer
GETTING TO KNOW YOUR VEHICLE 67 Rear Window Wiper/Washer If the lever is pushed while the wiper is in the off position, the wiper will operate for several wipe cycles, then turn off. The rear wiper/washer controls are located on the lever on the right side of the steering column.
Page 70: Windshield Wiper De-Icer - If Equipped
68 GETTING TO KNOW YOUR VEHICLE • Activation By Remote Start Operation — When Remote CAUTION! Start is active and the outside ambient temperature is less than 40° F (4.4° C), the Windshield Wiper De-Icer Failure to follow these cautions can cause damage to will be enabled.
Page 71: Air Outlet And Diffuser Locations - Passenger Compartment
GETTING TO KNOW YOUR VEHICLE 69 Air Outlet And Diffuser Locations — Passenger Compartment Center Air Outlets 1 — Air Flow Outlet Adjustment 2 — Adjustable Air Outlet 3 — Air Vane Adjustment Left Side Air Outlets 1 — Fixed Air Outlet 2 —...
Page 72: Manual Climate Controls Overview
70 GETTING TO KNOW YOUR VEHICLE Manual Climate Controls Overview Right Side Air Outlets 1 — Fixed Air Outlet Manual Climate Controls 2 — Adjustable Air Outlet 3 — Air Vane Adjustment 4 — Air Flow Outlet Adjustment...
Page 73 GETTING TO KNOW YOUR VEHICLE 71 Manual Climate Control Descriptions Icon Description MAX A/C Setting MAX A/C sets the system for maximum cooling performance. Rotate the temperature control adjust knob counterclockwise to the MAX A/C setting. In MAX A/C, the blower speed and mode position can be adjusted to desired user settings.
Page 74 72 GETTING TO KNOW YOUR VEHICLE Icon Description Front Defrost Mode Air is directed through the windshield and side window demister outlets. Use this mode with maximum blower and temperature settings for best windshield and side window defrosting. NOTE: The air conditioning compressor operates in Mix or Defrost, even if the Air Condition- ing (A/C) button is not pushed.
Page 75 GETTING TO KNOW YOUR VEHICLE 73 Icon Description Panel Mode Panel Mode Air is directed through the outlets in the instrument panel. These outlets can be adjusted to di- rect airflow. The center instrument panel outlets can be adjusted so that they are directed to- ward the rear seat passengers for maximum airflow to the rear.
Page 76: Introduction
74 GETTING TO KNOW YOUR VEHICLE Rear Window Defrosting Air Recirculation Push and release the rear window defrost button to turn Push and release the Air Recirculation button so that the the function on/off. LED is on, to enter recirculation mode. It is recommended to turn the internal air recirculation on while standing in traffic Activation of this function is indicated by the rear defrost or in tunnels to prevent the introduction of polluted air.
Page 77: Automatic Climate Control Overview
GETTING TO KNOW YOUR VEHICLE 75 Automatic Climate Control Overview System Maintenance In Winter, the Climate Control system must be turned on at least once a month for approximately ten minutes. Have the system inspected at an authorized dealer before the summer.
Page 78 76 GETTING TO KNOW YOUR VEHICLE Icon Description A/C Button Push the A/C Control Button to change the current setting. The indicator illuminates when the A/C is ON. Pushing the AUTO control button will cause the A/C operation to change to AUTO mode and the A/C indicator will turn off.
Page 79 GETTING TO KNOW YOUR VEHICLE 77 Icon Description MAX Defrost Button Push the MAX Defrost button to change the current airflow setting to Defrost mode. The indica- tor illuminates when this feature is on. Performing this function will cause the automatic climate controls to change to manual mode.
Page 80 78 GETTING TO KNOW YOUR VEHICLE Icon Description Blower Control Knob Blower control is used to regulate the amount of air forced through the climate system. Adjust- ing the blower will cause the automatic mode to change to manual operation. The speeds can be selected by rotating the Blower Control adjustment knob.
Page 81 GETTING TO KNOW YOUR VEHICLE 79 Icon Description Bi-Level Mode Bi-Level Mode Bi-Level Mode is obtained by pressing both the Panel Mode button and the Floor Mode button, activating them both. Air comes from the instrument panel outlets and floor outlets. A slight amount of air is directed through the defrost and side window demister outlets.
Page 82 80 GETTING TO KNOW YOUR VEHICLE Climate Control System Compressor In MAX A/C, the blower speed and mode position can be adjusted to desired user settings. Pressing other settings Push the A/C Control button to activate/deactivate the will cause the MAX A/C operation to switch to the selected compressor (activation is indicated by the LED on the setting and MAX A/C to exit.
Page 83 GETTING TO KNOW YOUR VEHICLE 81 When the function is activated, the AUTO button LED CAUTION! turns off. With the function activated, the only possible To avoid causing damage to the rear window defroster manual adjustments are pushing the A/C control button, heating filaments do not affix stickers or other objects adjusting the fan speed and turning the heated rear win- to the inside of the rear glass.
Page 84 82 GETTING TO KNOW YOUR VEHICLE To restart the Climate Control system in fully automatic NOTE: mode, push the AUTO button. • For Manual Climate Controls, if the system is in Mix, Floor or Defrost Mode, the A/C can be turned off, but System Maintenance the A/C system shall remain active to prevent fogging of In Winter, the Climate Control system must be turned on at...
Page 85 GETTING TO KNOW YOUR VEHICLE 83 Recirculation 2. Adjust the temperature you would like the system to maintain, by adjusting the driver, and passenger tem- In cold weather, use of Recirculation mode may lead to peratures. Once the desired temperature is displayed, excessive window fogging.
Page 86: Operating Tips
84 GETTING TO KNOW YOUR VEHICLE Operating Tips Window Fogging Vehicle windows tend to fog on the inside in mild, rainy, NOTE: Refer to the chart at the end of this section for and/or humid weather. To clear the windows, select De- suggested control settings for various weather conditions.
Page 87 GETTING TO KNOW YOUR VEHICLE 85 Outside Air Intake Operating Tips Chart Make sure the air intake, located directly in front of the windshield, is free of obstructions, such as leaves. Leaves collected in the air intake may reduce airflow, and if they enter the plenum, they could plug the water drains.
Page 88: Windows
86 GETTING TO KNOW YOUR VEHICLE WINDOWS There are single window controls on each passenger door trim panel, which operate the passenger door windows. Driver’s Door Controls The window controls will operate only when the ignition is The power window switch is located on the driver’s door in the ON/RUN or START position.
Page 89 GETTING TO KNOW YOUR VEHICLE 87 Auto-Down Feature — If Equipped Auto-Up Feature With Auto-Reverse Protection — If Equipped Push To Activate Auto-Down Feature Lift To Activate Auto-Up Feature The driver and passenger power window switches have an Auto-Down feature. Push the switch for half a second and The driver and front passenger power window switches release it;...
Page 90 88 GETTING TO KNOW YOUR VEHICLE NOTE: To enable the passenger window controls, push and release the window lockout button again, and the indicator light • If the window runs into any obstacle during auto- on the button will turn off. closure, it will reverse direction and then go back down.
Page 91: Sunroof - If Equipped
GETTING TO KNOW YOUR VEHICLE 89 windows open, open the front and rear windows together to minimize the buffeting. If the buffeting occurs with the sunroof open, adjust the sunroof opening to minimize the buffeting or open any window. SUNROOF — IF EQUIPPED The sunroof has two glass panels (the front one is opera- tional and the rear one fixed) and is equipped with two manual operated sun blinds, front and rear.
Page 92: Opening The Sunroof
90 GETTING TO KNOW YOUR VEHICLE Closing The Sunroof WARNING! (Continued) To close the front panel completely, pull the sunroof switch while operating the power sunroof switch. Such from the open position. The sunroof can be stopped in any entrapment may result in serious injury or death. position by pulling the sunroof switch a second time while •...
Page 93: Anti Pinch Protect Feature
GETTING TO KNOW YOUR VEHICLE 91 Anti Pinch Protect Feature This feature will detect an obstruction in the opening of the sunroof during Express Close operation. If an obstruction in the path of the sunroof is detected, the sunroof will automatically retract.
Page 94: Power Sunroof Relearn Procedure
92 GETTING TO KNOW YOUR VEHICLE Power Sunroof Relearn Procedure HOOD Opening As a result of any abnormal behavior of the roof or as a result of an emergency operation, and you must relearn the The hood release lever (to open the primary latch) and automatic operation of the sunroof.
Page 95 GETTING TO KNOW YOUR VEHICLE 93 3. Push the safety latch release lever toward the passenger side of the vehicle. The safety latch is located behind the center front edge of the hood. Hood Prop System 1 — Locking Tab 2 —...
Page 96: Closing
94 GETTING TO KNOW YOUR VEHICLE Closing LIFTGATE The liftgate release function is disabled when the vehicle is 1. Hold up the hood with one hand and with the other in motion. hand remove the support rod from its seat and reinsert it into the locking tab.
Page 97 GETTING TO KNOW YOUR VEHICLE 95 When opening the door, the turn signal lights will flash 2. Using the supplied screwdriver (located under cargo twice and the interior dome light will illuminate. The floor in tool kit), remove the yellow tab from the liftgate interior dome light will turn off automatically by closing latching mechanism.
Page 98: Closing
96 GETTING TO KNOW YOUR VEHICLE Closing Cargo Area Features Grasp the liftgate closing handle and lower the liftgate. Cargo Load Floor — If Equipped The vehicle is equipped with a load floor that can be adjusted as needed. Position 1 (Floor Flush): This position allows you to make the load floor flat for ease of loading/unloading objects from the cargo area.
Page 99 GETTING TO KNOW YOUR VEHICLE 97 Access To The Loading Floor To access the double load compartment, proceed as fol- lows: 1. Lift up on the Load Floor Handle. Cargo Area Storage CAUTION! The load floor must be arranged in a central position with respect to cargo area.
Page 100 98 GETTING TO KNOW YOUR VEHICLE Access To Tire Service Kit Or Spare Tire Cargo Box — If Equipped To access the Tire Service Kit or spare tire and container The cargo area contains a preformed cargo box that can be carrier, proceed as follows: used for the storage of objects that allows you to obtain a uniform level when loading.
Page 101: Internal Equipment
GETTING TO KNOW YOUR VEHICLE 99 INTERNAL EQUIPMENT To close the compartment door, push downward on the door’s surface to latch the door closed. Storage Lower Glove Compartment Glove Compartments To open the lower glove compartment, pull outward on the The glove compartments are located on the passenger side latch and lower the glove compartment door.
Page 102 100 GETTING TO KNOW YOUR VEHICLE Front Armrest The front armrest is located between the front seats. The armrest can be adjusted by moving it in the direction indicated by the arrows. Storage Compartment Push the storage handle and lift up the armrest to access the storage compartment.
Page 103: Cupholders
GETTING TO KNOW YOUR VEHICLE 101 Cupholders To move the sun visor against the driver or passenger door glass, remove the sun visor from the hook and turn it There are two cupholders for the front seat passengers, toward the side window. located in the center console.
Page 104: Power Outlets
102 GETTING TO KNOW YOUR VEHICLE Power Outlets Extendible Sun Visor To extend the sun visor, proceed as follows: There is one 12 Volt (13 Amp) power outlet in this vehicle, located under the HVAC controls. This power outlet can 1.
Page 105: Cigar Lighter - If Equipped
GETTING TO KNOW YOUR VEHICLE 103 Cigar Lighter — If Equipped NOTE: • Do not exceed the maximum power of 160 Watts This is located on the instrument panel, below the climate (13 Amps) at 12 Volts. If the 160 Watt (13 Amp) power controls.
Page 106: Ashtray - If Equipped
104 GETTING TO KNOW YOUR VEHICLE Ashtray — If Equipped Grab Handles The Grab Handles are located immediately above the NOTE: Ashtrays can be purchased at an authorized dealer doors. The rear handles are equipped with hooks for dress through Mopar parts. hangers.
Page 107: Roof Luggage Rack - If Equipped
GETTING TO KNOW YOUR VEHICLE 105 ROOF LUGGAGE RACK — IF EQUIPPED Do not use the sunroof when using the crossbars. Your vehicle may be equipped with a Roof Luggage Rack WARNING! for transporting accessories. Cargo must be securely tied down before driving your Crossbars should always be used whenever cargo is placed vehicle.
Page 108 106 GETTING TO KNOW YOUR VEHICLE CAUTION! (Continued) • Travel at reduced speeds and turn corners carefully when carrying large or heavy loads on the roof rack. Wind forces, due to natural causes or nearby truck traffic, can add sudden upward loads. This is espe- cially true on large flat loads and may result in damage to the cargo or your vehicle.
Page 109 GETTING TO KNOW YOUR INSTRUMENT PANEL CONTENTS ▫ Yellow Indicator Lights ....129 INSTRUMENT CLUSTER ....108 ▫...
Page 110: Instrument Cluster
108 GETTING TO KNOW YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER Instrument Cluster NOTE: The illumination of the graphics on the instrument cluster may vary according to the version (Monocolor or Color display).
Page 111: Instrument Cluster Descriptions
GETTING TO KNOW YOUR INSTRUMENT PANEL 109 Instrument Cluster Descriptions 4. Engine Coolant Temperature • The temperature gauge in the instrument cluster dis- 1. Speedometer play displays the temperature of the engine coolant • Indicates the speed of the car. and starts providing indications when the coolant 2.
Page 112: Instrument Cluster Display
110 GETTING TO KNOW YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DISPLAY Your vehicle may be equipped with an instrument cluster display, which offers useful information to the driver. With the ignition in the STOP/OFF position, opening/closing of a door will activate the display for viewing, and display the total miles, or kilometers, in the odometer.
Page 113: Mapping And Reconfigurable Zone Display - If Equipped
GETTING TO KNOW YOUR INSTRUMENT PANEL 111 Mapping And Reconfigurable Zone Display — • Push the up arrow button to scroll upward through the If Equipped main menus and submenus (Speedometer, Vehicle Info, Driver Assist, Fuel Economy, Trip, Audio, Messages, Screen Set Up).
Page 114: Engine Oil Change Reset
112 GETTING TO KNOW YOUR INSTRUMENT PANEL To reset the oil change indicator system (after performing ZONE LOCATIONS CONTENT the scheduled maintenance), refer to the following proce- Zone 4 Audio Information dure. Browsing Arrows Display Menu Titles 1. Turn the ignition switch to the ON position (do not start the engine).
Page 115 GETTING TO KNOW YOUR INSTRUMENT PANEL 113 • Messages Instrument Cluster Display Menu/Submenu Items • Settings The Menu is composed of the following items: • Speedometer – Display – Units • Trip – Clock & Date – Instantaneous Info – Security –...
Page 116 114 GETTING TO KNOW YOUR INSTRUMENT PANEL • Trip A • Sport Mode – View Trip A distance (miles or km). – Acceleration – View travel time A (hours/minutes/seconds). – Turbo Boost Or Engine Power – View average consumption A (mpg, or l/ 100km –...
Page 117 GETTING TO KNOW YOUR INSTRUMENT PANEL 115 • Battery Voltage • MP3”: title display or number song playing. – View the voltage value (state of charge) of the battery. • USB : title display or number song playing. Driver Assist •...
Page 118 116 GETTING TO KNOW YOUR INSTRUMENT PANEL • Doors and Locks Navigation • Engine OFF Procedure — If Equipped If activated, this menu item will display navigation status and directions. Refer to “Uconnect Settings” in “Multimedia” for more Messages (Stored) information.
Page 119 GETTING TO KNOW YOUR INSTRUMENT PANEL 117 • Navigation Repetition: Allows you to select “On” or Security “Off” on the instrument cluster display, information By selecting the item “Security,” you can make the follow- relating to the navigation mode. ing adjustments: Units •...
Page 120 118 GETTING TO KNOW YOUR INSTRUMENT PANEL • Park Assist Vol.: A selection of the volume of acoustic • Interior Ambient Lights: Increase of decrease the bright- signals provided by Park Assist. ness of the Interior Ambient Lights. • Rain Sensing Wipers: Enabling/disabling the automatic •...
Page 121 GETTING TO KNOW YOUR INSTRUMENT PANEL 119 • Sound Horn With Lock: Activate/deactivate the horn • Engine OFF Procedure — If Equipped: Allows you to when pushing the lock button on the Remote Keyless turn off the engine from the instrument cluster in the Entry.
Page 122: Warning Lights And Messages
120 GETTING TO KNOW YOUR INSTRUMENT PANEL WARNING LIGHTS AND MESSAGES — Brake Warning Light The warning/indicator lights will illuminate in the instru- This warning light monitors various brake functions, in- ment panel together with a dedicated message and/or cluding brake fluid level and parking brake application. If acoustic signal when applicable.
Page 123 GETTING TO KNOW YOUR INSTRUMENT PANEL 121 NOTE: The light may flash momentarily during sharp The light also will turn on when the parking brake is cornering maneuvers, which change fluid level conditions. applied with the ignition switch in the ON/RUN position. The vehicle should have service performed, and the brake NOTE: This light shows only that the parking brake is fluid level checked.
Page 124 122 GETTING TO KNOW YOUR INSTRUMENT PANEL — Door Open Warning Light PARK position. The light should turn off. If the light remains on with the vehicle running, your vehicle will This indicator will illuminate when one or more door(s) are usually be drivable;...
Page 125: Yellow Warning Lights
GETTING TO KNOW YOUR INSTRUMENT PANEL 123 Do not operate the vehicle until the cause is corrected. This — Vehicle Security Warning Light — If Equipped light does not indicate how much oil is in the engine. The This light will flash at a fast rate for approximately 15 engine oil level must be checked under the hood.
Page 126 124 GETTING TO KNOW YOUR INSTRUMENT PANEL If the ABS light remains on or turns on while driving, then driven several miles (kilometers) at speeds greater than the Anti-Lock portion of the brake system is not function- 30 mph (48 km/h), see an authorized dealer as soon as ing and service is required as soon as possible.
Page 127 GETTING TO KNOW YOUR INSTRUMENT PANEL 125 — External Light Failure Indicator Light — — Low Fuel Warning Light If Equipped When the fuel level reaches approximately 1.3–1.8 gal The External Light Failure Indicator will come on when a (5–7 L) this light will turn on, and remain on until fuel is failure to one of the following lights is detected: added.
Page 128 126 GETTING TO KNOW YOUR INSTRUMENT PANEL should be serviced by an authorized dealer as soon as light when the key is turned to MAR/ON/RUN - 1242 possible if this occurs. miles (2,000 km) or 30 days before these deadlines, and reappears every time the key is turned to MAR/ON/RUN.
Page 129 GETTING TO KNOW YOUR INSTRUMENT PANEL 127 Should one or more tires be in the condition mentioned more of your tires is significantly under-inflated. Accord- above, the display will show the indications corresponding ingly, when the low tire pressure telltale illuminates, you to each tire.
Page 130 128 GETTING TO KNOW YOUR INSTRUMENT PANEL the installation of replacement or alternate tires or wheels — Transmission Temperature Warning Light on the vehicle that prevent the TPMS from functioning This light indicates that the transmission fluid temperature properly. Always check the TPMS malfunction telltale after is running hot.
Page 131: Yellow Indicator Lights
GETTING TO KNOW YOUR INSTRUMENT PANEL 129 — Service LaneSense Warning Light — — Full Brake Control System Off Indicator Light — If Equipped If Equipped This warning light will illuminate when the LaneSense This indicator light illuminates to indicate that the Full system is not operating and requires service.
Page 132: Green Indicator Lights
130 GETTING TO KNOW YOUR INSTRUMENT PANEL — Exterior Bulb Failure Indicator Light — — Park/Headlight On Indicator Light If Equipped This indicator light will illuminate when the park lights or This light will illuminate when there is a malfunction in headlights are turned on.
Page 133: White Indicator Lights
GETTING TO KNOW YOUR INSTRUMENT PANEL 131 — Stop/Start Active Indicator Light — exceeded, a single chime will sound along with pop up If Equipped message of “Speed Warning Exceeded.” Speed Warning can be turned on and off in the instrument cluster display, This indicator light will illuminate when the Stop/Start for further information refer to “Instrument Cluster Dis- function is in “Autostop”...
Page 134: Gray Indicator Lights
132 GETTING TO KNOW YOUR INSTRUMENT PANEL Gray Indicator Lights CAUTION! — Speed Control Ready/Cancelled Indicator Light • Prolonged driving with the MIL on could cause This light will turn on when the speed control has been further damage to the emission control system. It turned on, but not set, or cancelled by the driver.
Page 135: Emissions Inspection And Maintenance Programs
GETTING TO KNOW YOUR INSTRUMENT PANEL 133 EMISSIONS INSPECTION AND MAINTENANCE WARNING! PROGRAMS • ONLY an authorized service technician should con- In some localities, it may be a legal requirement to pass an nect equipment to the OBD II connection port in inspection of your vehicle’s emissions control system.
Page 136 134 GETTING TO KNOW YOUR INSTRUMENT PANEL Your vehicle has a simple ignition actuated test, which you If your OBD II system is not ready, you should see an can use prior to going to the test station. To check if your authorized dealer or repair facility.
Page 137 SAFETY CONTENTS ▫ Supplemental Restraint Systems (SRS) ..173 SAFETY FEATURES ..... .136 ▫ Anti-Lock Brake System (ABS) ... . .136 ▫...
Page 138: Safety Features
136 SAFETY SAFETY FEATURES These are all normal characteristics of ABS. Anti-Lock Brake System (ABS) WARNING! The Anti-Lock Brake System (ABS) provides increased • The ABS contains sophisticated electronic equip- vehicle stability and brake performance under most brak- ment that may be susceptible to interference caused ing conditions.
Page 139: Electronic Brake Control System
SAFETY Electronic Brake Control System WARNING! (Continued) Your vehicle is equipped with an advanced Electronic • The capabilities of an ABS equipped vehicle must never Brake Control system (EBC). This system includes Elec- be exploited in a reckless or dangerous manner that tronic Brake Force Distribution (EBD), Anti-Lock Brake could jeopardize the user’s safety or the safety of others.
Page 140 138 SAFETY functioning properly and that immediate service is re- WARNING! (Continued) quired. If the “Brake System Warning Light” does not come conditions. BAS cannot prevent collisions, including on when the ignition is turned to the ON/RUN mode, have those resulting from excessive speed in turns, driving the light repaired as soon as possible.
Page 141 SAFETY • The vehicle must be on a sufficient grade. Disabling And Enabling HSA • The gear selection must match vehicle uphill direction This feature can be turned on or turned off. To change the (i.e., vehicle facing uphill is in forward gear; vehicle current setting, proceed as follows: backing uphill is in REVERSE gear).
Page 142 140 SAFETY for oversteering or understeering of the vehicle by apply- NOTE: The ESC Off switch is located below the radio ing the brake of the appropriate wheel(s) to assist in screen. counteracting the oversteer or understeer condition. En- gine power may also be reduced to help the vehicle WARNING! maintain the desired path.
Page 143 SAFETY NOTE: You are advised to select Partial off mode only for WARNING! (Continued) specific driving requirements. type and size or wheel size may adversely affect ESC Partial Off performance. Improperly inflated and unevenly worn tires may also degrade ESC performance. Any By pressing the ESC off button located below the radio vehicle modification or poor vehicle maintenance screen when driving, the intervention of the ESC and TCS...
Page 144 142 SAFETY WARNING! WARNING! When in “Partial Off” mode, the TCS functionality of Many factors, such as vehicle loading, road conditions ESC, (except for the limited slip feature described in and driving conditions, influence the chance that the TCS section), has been disabled and the “ESC Off wheel lift or rollover may occur.
Page 145: Auxiliary Driving Systems
SAFETY NOTE: The DST feature is only meant to help the driver realize the correct course of action through small torques on the steering wheel, which means the effectiveness of the DST feature is highly dependent on the driver’s sensitivity and overall reaction to the applied torque.
Page 146 144 SAFETY The BSM detection zone covers approximately one lane width on both sides of the vehicle, 10 ft (3 m). The zone length starts at the outside mirror and extends approxi- mately 20 ft (6 m) beyond the rear bumper of the vehicle. The BSM system monitors the detection zones on both sides of the vehicle when the vehicle speed reaches ap- proximately 6 mph (10 km/h) or higher and will alert the...
Page 147 SAFETY Entering From The Side Vehicles that move into your adjacent lanes from either side of the vehicle. BSM Warning Light The BSM system monitors the detection zone from three different entry points (side, rear, front) while driving to see if an alert is necessary.
Page 148 146 SAFETY Entering From The Rear Overtaking Traffic Vehicles that come up from behind your vehicle on either If you pass another vehicle slowly with a relative speed less side and enter the rear detection zone with a relative speed than 15 mph (25 km/h) and the vehicle remains in the of less than 31 mph (50 km/h).
Page 149 SAFETY Overtaking/Passing Stationary Objects The BSM system is designed not to issue an alert on The BSM system will not alert you of objects that are stationary objects such as guardrails, posts, walls, foliage, traveling in the opposite direction of the vehicle in adjacent berms, etc.
Page 150 148 SAFETY Rear Cross Path (RCP) The Rear Cross Path (RCP) feature is intended to aid the driver when backing out of parking spaces where their vision of oncoming vehicles may be blocked. Proceed slowly and cautiously out of the parking space until the rear end of the vehicle is exposed.
Page 151 SAFETY (2 km/h), to objects moving a maximum of approximately Blind Spot Alert Lights Only 22 mph (35 km/h), such as in parking lot situations. When operating in Blind Spot Alert mode, the BSM system NOTE: In a parking lot situation, oncoming vehicles can be will provide a visual alert in the appropriate side view obscured by vehicles parked on either side.
Page 152 150 SAFETY present. Whenever an audible alert is requested, the radio System Not Available is also muted. Turn/hazard signal status is ignored; the In the case of the system being temporary unavailable: RCP state always requests the chime. • BSM Mirror Warning Lights are turned on continuously. Blind Spot Alert Off •...
Page 153: Full Brake Control System
SAFETY • If the driver does not take action based upon these NOTE: Changes or modifications not expressly approved by the party responsible for compliance could void the progressive warnings, then the system will provide a user’s authority to operate the equipment. limited level of active braking to help slow the vehicle and mitigate the potential forward collision.
Page 154 152 SAFETY • The Full Brake Control System is intended for on-road use only. If the vehicle is taken off-road, the Full Brake Control System system should be deactivated to prevent unnecessary warnings to the surroundings. WARNING! The Full Brake Control System is not intended to avoid a collision on its own, nor can the Full Brake Control System detect every type of potential collision.
Page 155: Windshield
SAFETY • Changing the Full Brake Control System status to “Only By setting the sensitivity of the system to Far , the system Warning” prevents the system from providing limited will warn the driver of a possible accident with the vehicle active braking, or additional brake support if the driver in front when the latter is at a greater distance, giving you is not braking adequately in the event of a potential...
Page 156 154 SAFETY performance is no longer present, the system will return to The “Brake Control Front Radar Sensor Temporarily its full performance state. If the problem persists, see an Blocked” message can sometimes be displayed while driv- authorized dealer. ing in highly reflective areas (i.e. tunnels with reflective tiles, or ice and snow).
Page 157 SAFETY • Installing a snow plow, front-end protector, an aftermar- Driving In The Vicinity Of A Curve ket grille or modifying the grille is not recommended. Entering or exiting a large curve, the system could detect Doing so may block the sensor and inhibit Full Brake the presence of a vehicle that is in front of the car, but that Control System operation.
Page 158 156 SAFETY Small Vehicles And/Or Not Aligned To The Lane Lane Changing Of Other Vehicles The system is not able to detect the presence of vehicles Vehicles that suddenly change lane, while standing in the that are in front of the car but placed outside the field of traffic lane of their car and inside the field of action of the action of the radar sensor and could therefore not react in radar sensor may cause the intervention of the system.
Page 159: Tire Pressure Monitor System (Tpms)
SAFETY Passing Of Vehicles In An Oncoming Intersection 1. This device may not cause harmful interference. The system could temporarily react to a vehicle that 2. This device must accept any interference received, in- crossed the range of the radar sensor, in an oncoming cluding interference that may cause undesired opera- intersection.
Page 160 158 SAFETY the vehicle’s tires. The tire pressure will also increase as the the measured tire pressure is 27 psi (186 kPa), a tempera- vehicle is driven, this is normal and there should be no ture drop to 20° F (-7° C) will decrease the tire pressure to adjustment for this increased pressure.
Page 161 SAFETY under-inflation has not reached the level to trigger CAUTION! (Continued) illumination of the Tire Pressure Monitoring Telltale your vehicle to an authorized dealership to have your Light. sensor function checked. • Seasonal temperature changes will affect tire pressure, • After inspecting or adjusting the tire pressure, al- and the TPMS will monitor the actual tire pressure in the ways reinstall the valve stem cap.
Page 162 160 SAFETY • Jamming due to electronic devices or driving next to Tire Pressure Monitoring Low Pressure Warnings facilities emitting the same radio frequencies as the TPM The Tire Pressure Monitoring Telltale Light will illuminate sensors. in the instrument cluster, an acoustic signal will be acti- •...
Page 163: Occupant Restraint Systems
SAFETY • This occurs for each subsequent ignition cycle, a chime NOTE: Changes or modifications not expressly approved will sound and the Tire Pressure Monitoring Telltale by the party responsible for compliance could void the Light will flash on and off for 75 seconds and then user’s authority to operate the equipment.
Page 164: Important Safety Precautions
162 SAFETY Important Safety Precautions 6. All occupants should always wear their lap and shoul- der belts properly. Please pay close attention to the information in this section. It tells you how to use your restraint system properly, to 7. The driver and front passenger seats should be moved keep you and your passengers as safe as possible.
Page 165: Seat Belt Systems
SAFETY Initial Indication WARNING! (Continued) If the driver is unbuckled when the ignition switch is first rear seat, do not transport a rear-facing child restraint in the START or ON/RUN position, a chime will signal for in that vehicle. a few seconds. If the driver or outboard front seat passen- Seat Belt Systems ger (if equipped with outboard front passenger seat BeltAlert) is unbuckled when the ignition switch is first in...
Page 166 164 SAFETY driver and occupied outboard front seat passenger seat Reminder Light will turn on and remain on until the driver belts are buckled. The driver should instruct all occupants and outboard front seat passenger seat belts are buckled. to buckle their seat belts. Lap/Shoulder Belts Change of Status All seating positions in your vehicle are equipped with...
Page 167 SAFETY WARNING! (Continued) WARNING! vehicle. Always be sure you and others in your • A lap belt worn too high can increase the risk of vehicle are buckled up properly. injury in a collision. The seat belt forces won’t be at •...
Page 168 166 SAFETY Lap/Shoulder Belt Operating Instructions WARNING! (Continued) 1. Enter the vehicle and close the door. Sit back and adjust injury. A seat belt worn under the arm can cause the seat. internal injuries. Ribs aren’t as strong as shoulder bones.
Page 169 SAFETY Inserting Latch Plate Into Buckle Positioning The Lap Belt 3. When the seat belt is long enough to fit, insert the latch 4. Position the lap belt so that it is snug and lies low across plate into the buckle until you hear a “click.” your hips, below your abdomen.
Page 170 168 SAFETY Lap/Shoulder Belt Untwisting Procedure Use the following procedure to untwist a twisted lap/ shoulder belt. 1. Position the latch plate as close as possible to the anchor point. 2. At about 6 to 12 inches (15 to 30 cm) above the latch plate, grasp and twist the seat belt webbing 180 degrees to create a fold that begins immediately above the latch plate.
Page 171 SAFETY Adjustable Upper Shoulder Belt Anchorage In the driver and outboard front passenger seats, the top of the shoulder belt can be adjusted upward or downward to position the seat belt away from your neck. Push or squeeze the anchorage button to release the anchorage, and move it up or down to the position that serves you best.
Page 172 170 SAFETY Seat Belts And Pregnant Women WARNING! • Wearing your seat belt incorrectly could make your injuries in a collision much worse. You might suffer internal injuries, or you could even slide out of the seat belt. Follow these instructions to wear your seat belt safely and to keep your passengers safe, too.
Page 173 SAFETY Seat Belt Pretensioner Switchable Automatic Locking Retractors (ALR) The front outboard seat belt system is equipped with The seat belts in the passenger seating positions are pretensioning devices that are designed to remove slack equipped with a Switchable Automatic Locking Retractor from the seat belt in the event of a collision.
Page 174 172 SAFETY ALR is activated, you will hear a clicking sound as the seat WARNING! (Continued) belt retracts. Allow the webbing to retract completely in • Never install a rear-facing child restraint in the front this case and then carefully pull out only the amount of seat of a vehicle.
Page 175: Supplemental Restraint Systems (Srs)
SAFETY Supplemental Restraint Systems (SRS) WARNING! Some of the safety features described in this section may be • The seat belt assembly must be replaced if the standard equipment on some models, or may be optional switchable Automatic Locking Retractor (ALR) fea- equipment on others.
Page 176 174 SAFETY • Instrument Panel The ORC contains a backup power supply system that may deploy the air bag system even if the battery loses power or • Knee Impact Bolsters it becomes disconnected prior to deployment. • Driver and Front Passenger Air Bags The ORC turns on the Air Bag Warning Light in the •...
Page 177 SAFETY • The Air Bag Warning Light does not come on during the Redundant Air Bag Warning Light four to eight seconds when the ignition switch is first in If a fault with the Air Bag Warning Light is the MAR/ACC/ON/RUN position. detected, which could affect the Supplemental •...
Page 178 176 SAFETY WARNING! (Continued) • Never place a rear-facing child restraint in front of an air bag. A deploying passenger front air bag can cause death or serious injury to a child 12 years or younger, including a child in a rear-facing child restraint.
Page 179 SAFETY This vehicle may be equipped with a driver and/or front WARNING! (Continued) passenger seat belt buckle switch that detects whether the • Relying on the air bags alone could lead to more driver or front passenger seat belt is buckled. The seat belt severe injuries in a collision.
Page 180 178 SAFETY Seat belts are necessary for your protection in all collisions, WARNING! (Continued) and also are needed to help keep you in position, away • Do not mount any accessories to the knee impact from an inflating air bag. bolsters such as alarm lights, stereos, citizen band When the ORC detects a collision requiring the front air radios, etc.
Page 181 SAFETY The SABs may help to reduce the risk of occupant injury When the SAB deploys, it opens the seam on the outboard during certain side impacts, in addition to the injury side of the seatback’s trim cover. The inflating SAB deploys reduction potential provided by the seat belts and body through the seat seam into the space between the occupant structure.
Page 182 180 SAFETY Supplemental Side Air Bag Inflatable Curtains (SABICs) This vehicle is equipped with Supplemental Side Air Bag Inflatable Curtains (SABICs). Supplemental Side Air Bag Inflatable Curtains (SABICs) are located above the side windows. The trim covering the SABICs is labeled “SRS AIRBAG” or “AIRBAG.” Supplemental Side Air Bag Inflatable Curtain (SABIC) SABICs may help reduce the risk of head and other injuries to front and rear seat outboard occupants in certain side...
Page 183 SAFETY The SABICs may help reduce the risk of partial or complete ORC in determining the appropriate response to impact ejection of vehicle occupants through side windows in events. The system is calibrated to deploy the Side Air Bags certain side impact events. on the impact side of the vehicle during impacts that require Side Air Bag occupant protection.
Page 184 182 SAFETY WARNING! (Continued) WARNING! (Continued) • Relying on the Side Air Bags alone could lead to or killed. Occupants, including children, should never lean on or sleep against the door, side win- more severe injuries in a collision. The Side Air Bags work with your seat belt to restrain you properly.
Page 185 SAFETY • Seat Belt Pretensioners event, and deployment of the Side Air Bags is appropriate, the rollover sensing system will also deploy the seat belt • Seat Track Position Sensors pretensioners on both sides of the vehicle. If A Deployment Occurs The SABICs may help reduce the risk of partial or complete The front air bags are designed to deflate immediately after ejection of vehicle occupants through side windows in...
Page 186 184 SAFETY inflation. These airborne particles may irritate the skin, Enhanced Accident Response System eyes, nose, or throat. If you have skin or eye irritation, In the event of an impact, if the communication network rinse the area with cool water. For nose or throat irrita- remains intact, and the power remains intact, depending tion, move to fresh air.
Page 187 SAFETY • Electric power steering the vehicle for fuel leaks in the engine compartment and on • Brake booster the ground near the engine compartment and fuel tank before resetting the system and starting the engine. • Electric park brake •...
Page 188 186 SAFETY Customer Will See Customer Will See NOTE: Each step MUST NOTE: Each step MUST Customer Action Customer Action BE held for at least two BE held for at least two seconds seconds 4. Place turn signal in Right turn light is OFF. 10.
Page 189 SAFETY Maintaining Your Air Bag System WARNING! (Continued) dealer. Only manufacturer approved seat accessories WARNING! may be used. If it is necessary to modify the air bag • Modifications to any part of the air bag system could system for persons with disabilities, contact an au- cause it to fail when you need it.
Page 190: Child Restraints
188 SAFETY These data can help provide a better understanding of the Children 12 years or younger should ride properly buckled circumstances in which crashes and injuries occur. up in a rear seat, if available. According to crash statistics, children are safer when properly restrained in the rear NOTE: EDR data are recorded by your vehicle only if a seats rather than in the front.
Page 191 SAFETY • Canadian residents should refer to Transport Canada’s NOTE: website for additional information: http://www.tc.gc.ca/ • For additional information, refer to http://www.nhtsa.gov/ eng/motorvehiclesafety/safedrivers-childsafety-index-53.htm. parents-and-caregivers or call 1-888-327-4236. Summary Of Recommendations For Restraining Children In Vehicles Recommended Type Of Child Child Size, Height, Weight Or Age Restraint Infants and Toddlers Children who are two years old or...
Page 192 190 SAFETY Infant And Child Restraints WARNING! (Continued) Safety experts recommend that children ride rear-facing in younger, including a child in a rear-facing child the vehicle until they are two years old or until they reach restraint. either the height or weight limit of their rear-facing child •...
Page 193 SAFETY cushion while the child’s back is against the seatback, they Children Too Large For Booster Seats should use a belt-positioning booster seat. The child and Children who are large enough to wear the shoulder belt belt-positioning booster seat are held in the vehicle by the comfortably, and whose legs are long enough to bend over seat belt.
Page 194 192 SAFETY If the answer to any of these questions was “no,” then the WARNING! child still needs to use a booster seat in this vehicle. If the child is using the lap/shoulder belt, check seat belt fit Never allow a child to put the shoulder belt under an periodically and make sure the seat belt buckle is latched.
Page 195 SAFETY Lower Anchors And Tethers For CHildren (LATCH) anchorages. In these seating positions, the seat belt must be Restraint System used with the top tether anchorage to install the child restraint. Please see the following table for more information. LATCH Positions For Installing Child Restraints In This Vehicle LATCH Label Your vehicle is equipped with the child restraint anchorage...
Page 196 194 SAFETY Frequently Asked Questions About Installing Child Restraints With LATCH What is the weight limit (child’s 65 lbs (29.5 kg) Use the LATCH anchorage system until the combined weight + weight of the child re- weight of the child and the child restraint is 65 lbs straint) for using the LATCH an- (29.5 kg).
Page 197 SAFETY Frequently Asked Questions About Installing Child Restraints With LATCH Can the rear head restraints be The head restraints can be removed in each seating posi- removed? tion if they interfere with the installation of the child re- straint. Refer to “Head Restraints” in “Getting To Know Your Vehicle”...
Page 198 196 SAFETY Locating The Upper Tether Anchorages anchorage. Forward-facing child restraints and some rear- facing child restraints will also be equipped with a tether strap. The tether strap will have a hook at the end to attach There are tether strap anchorages behind each to the top tether anchorage and a way to tighten the strap rear seating position located on the back of the after it is attached to the anchorage.
Page 199 SAFETY To Install A LATCH-Compatible Child Restraint 3. Attach the lower hooks or connectors of the child restraint to the lower anchorages in the selected seating If the selected seating position has a Switchable Automatic position. Locking Retractor (ALR) seat belt, stow the seat belt, following the instructions below.
Page 200 198 SAFETY How To Stow An Unused Switchable-ALR (ALR) WARNING! (Continued) Seat Belt: • Child restraint anchorages are designed to withstand When using the LATCH attaching system to install a child only those loads imposed by correctly-fitted child restraint, stow all ALR seat belts that are not being used by restraints.
Page 201 SAFETY The seat belts in the passenger seating positions are Lap/Shoulder Belt Systems For Installing Child equipped with a Switchable Automatic Locking Retractor Restraints In This Vehicle (ALR) that is designed to keep the lap portion of the seat belt tight around the child restraint so that it is not necessary to use a locking clip.
Page 202 200 SAFETY Frequently Asked Questions About Installing Child Restraints With Seat Belts What is the weight limit (child’s weight + Weight limit of the Always use the tether anchor when using the weight of the child restraint) for using the Child Restraint seat belt to install a forward facing child re- Tether Anchor with the seat belt to attach a...
Page 203 SAFETY Installing A Child Restraint With A Switchable 2. Pull enough of the seat belt webbing from the retractor Automatic Locking Retractor (ALR): to pass it through the belt path of the child restraint. Do not twist the belt webbing in the belt path. Child restraint systems are designed to be secured in vehicle seats by lap belts or the lap belt portion of a 3.
Page 204 202 SAFETY 8. If the child restraint has a top tether strap and the WARNING! (Continued) seating position has a top tether anchorage, connect the “Lower Anchors and Tethers for CHildren (LATCH) tether strap to the anchorage and tighten the tether Restraint System”...
Page 205: Transporting Pets
SAFETY two posts. If not possible, lower the head restraint and WARNING! pass the tether strap around the outboard side of the • An incorrectly anchored tether strap could lead to head restraint. increased head motion and possible injury to the 3.
Page 206: Safety Tips
204 SAFETY SAFETY TIPS Exhaust Gas Transporting Passengers WARNING! NEVER TRANSPORT PASSENGERS IN THE CARGO Exhaust gases can injure or kill. They contain carbon AREA. monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can even- WARNING! tually poison you.
Page 207: Safety Checks You Should Make Inside The Vehicle
SAFETY Whenever a change is noticed in the sound of the exhaust is first turned to ON/RUN. If the light is either not on system, when exhaust fumes can be detected inside the during starting, stays on, or turns on while driving, have the system inspected at an authorized dealer as vehicle, or when the underside or rear of the vehicle is soon as possible.
Page 208 206 SAFETY WARNING! WARNING! (Continued) vehicle properly parked with the engine off, fully An improperly attached, damaged, folded, or stacked depress the accelerator, the brake, and the clutch floor mat, or damaged floor mat fasteners may cause pedal (if present) to check for interference. If your your floor mat to interfere with the accelerator, brake, floor mat interferes with the operation of any pedal, or clutch pedals and cause a loss of vehicle control.
Page 209: Periodic Safety Checks You Should Make Outside The Vehicle
SAFETY Lights WARNING! (Continued) Have someone observe the operation of brake lights and interference with the accelerator, brake, or clutch exterior lights while you work the controls. Check turn pedals then re-install the floor mats. signal and high beam indicator lights on the instrument •...
Page 211 STARTING AND OPERATING CONTENTS ▫ Gear Selector ......222 STARTING THE ENGINE ....212 ▫...
Page 212 210 STARTING AND OPERATING ▫ To Manually Turn Off The Stop/Start System . .234 ▫ To Turn Off ......242 ▫...
Page 213 STARTING AND OPERATING 211 ▫ Park Assist Sensors .....261 TRAILER TOWING ..... .280 ▫...
Page 214: Starting The Engine
212 STARTING AND OPERATING STARTING THE ENGINE Proceed as follows: Before starting your vehicle, adjust your seat, adjust the 1. Set the Electric Park Brake (EPB) and put the gear inside and outside mirrors, fasten your seat belt, and if selector in the PARK or NEUTRAL position.
Page 215: If Engine Fails To Start
STARTING AND OPERATING 213 If Engine Fails To Start WARNING! (Continued) the vehicle. This could result in flash fire causing WARNING! serious personal injury. • Do not attempt to push or tow your vehicle to get it Never pour fuel or other flammable liquid into the throttle body air inlet opening in an attempt to start the started.
Page 216: Cold Weather Operation
214 STARTING AND OPERATING Cold Weather Operation 3. If the engine fails to start within 10 to 15 seconds, cycle the ignition to the OFF mode, wait five seconds to allow To ensure reliable starting under extreme cold conditions the starter to cool, then repeat the Extended Park an externally powered electric block heater (if equipped) is Starting procedure.
Page 217: Stopping The Engine
STARTING AND OPERATING 215 Stopping The Engine Turbocharger “Cool Down” — If Equipped To shut off the engine with vehicle speed greater than This vehicle is equipped with an after-run pump to cool the 5 mph (8 km/h), you must push and hold the ignition or turbocharger after the engine is shut off.
Page 218: Electric Park Brake (Epb)
216 STARTING AND OPERATING under which vehicle operations will occur. For the recom- You can engage the EPB in two ways; mended viscosity and quality grades, refer to “Dealer • Manually, by pulling up on the park brake switch Service” in “Servicing And Maintenance”. momentarily to apply.
Page 219 STARTING AND OPERATING 217 illuminate. If your foot is on the brake pedal while you whirring sound from the back of the vehicle while the apply the EPB, you may notice a small amount of brake parking brake disengages. You may also notice a small pedal movement.
Page 220 218 STARTING AND OPERATING WARNING! (Continued) CAUTION! • Never leave children alone in a vehicle, or with If the Brake System Warning Light remains on with the access to an unlocked vehicle. Allowing children to parking brake released, a brake system malfunction is be in a vehicle unattended is dangerous for a number indicated.
Page 221: Auto Park Brake
STARTING AND OPERATING 219 in case of Automatic or Dual clutch transmission, when the WARNING! (Continued) ignition is in the OFF mode EPB can automatically apply the parking brake is fully disengaged before driving; even if it has been previously disabled failure to do so can lead to brake failure and a collision.
Page 222: Brake Service Mode
220 STARTING AND OPERATING • The seat belt is unbuckled. Service Mode has requirements that must be met in order to be activated: • The driver door is open. • The vehicle must be at a standstill. SafeHold can be temporarily bypassed by pushing the EPB •...
Page 223: Automatic Transmission - If Equipped
STARTING AND OPERATING 221 NOTE: A dedicated message will appear in the instrument WARNING! cluster if Brake Service Mode cannot be deactivated. • It is dangerous to shift out of PARK or NEUTRAL if WARNING! the engine speed is higher than idle speed. If your foot is not firmly pressing the brake pedal, the You can be badly injured working on or around a vehicle could accelerate quickly forward or in re-...
Page 224: Gear Selector
222 STARTING AND OPERATING Gear Selector WARNING! (Continued) The transmission gear selector has PARK, REVERSE, NEU- be in a vehicle unattended is dangerous for a number TRAL, DRIVE, and AutoStick (+/-) shift positions. Manual of reasons. A child or others could be seriously or shifts can be made using the AutoStick shift control.
Page 225 STARTING AND OPERATING 223 The electronically-controlled transmission adapts its shift schedule based on driver inputs, along with environmental and road conditions. The transmission electronics are self- calibrating; therefore, the first few shifts on a new vehicle may be somewhat abrupt. This is a normal condition, and precision shifts will develop within a few hundred miles (kilometers).
Page 226: Gear Ranges
224 STARTING AND OPERATING Gear Ranges WARNING! PARK (P) • Never use the PARK position as a substitute for the This range supplements the Electric Park Brake (EPB) by parking brake. Always apply the parking brake fully locking the transmission. The engine can be started in this when exiting the vehicle to guard against vehicle range.
Page 227 STARTING AND OPERATING 225 WARNING! (Continued) CAUTION! the transmission into PARK, and turn the ignition • Before moving the transmission gear selector out of OFF. When the ignition is in the OFF mode, the PARK, you must turn the ignition to the ON/RUN transmission is locked in PARK, securing the vehicle mode, and also press the brake pedal.
Page 228 226 STARTING AND OPERATING REVERSE (R) CAUTION! (Continued) This range is for moving the vehicle backward. Shift into Towing” in “Starting And Operating” and “Towing A REVERSE only after the vehicle has come to a complete Disabled Vehicle” in “In Case Of Emergency” for stop.
Page 229 STARTING AND OPERATING 227 the range of torque converter clutch engagement. This is Operation done to prevent transmission damage due to overheating. When the gear selector is in the AutoStick position (beside If the transmission becomes extremely hot, the “Transmis- the DRIVE position), it can be moved forward and rear- sion Temperature Warning Light”...
Page 230: Transmission Limp Home Mode
228 STARTING AND OPERATING • If a requested downshift would cause the engine to Transmission Limp Home Mode overspeed, that shift will not occur. Transmission function is electronically monitored for ab- • The system will ignore attempts to upshift at too low of normal conditions.
Page 231: Ignition Park Interlock
STARTING AND OPERATING 229 NOTE: Even if the transmission can be reset, we recom- The brake pedal must also be pressed before pushing the mend that you visit an authorized dealer at your earliest button on the gear selector to shift from NEUTRAL into possible convenience.
Page 232: Dynamic Selector - If Equipped
230 STARTING AND OPERATING DYNAMIC SELECTOR — IF EQUIPPED All Weather Mode – This mode offers increased traction control and stability control for low traction conditions The Dynamic Selector combines the capabilities of the such as driving on a dirt road or off road as well as wet and vehicle control systems, along with driver input, to provide slippery roads.
Page 233: Stop/Start System
STARTING AND OPERATING 231 • If the condition persists, see an authorized dealer for assist or prevents the vehicle from providing assist, you will still have the ability to steer the vehicle manually. service. STOP/START SYSTEM WARNING! The Stop/Start function was developed to reduce fuel Continued operation with reduced assist could pose a consumption.
Page 234: Possible Reasons The Engine Does Not Autostop
232 STARTING AND OPERATING • The gear selector must be in a forward gear and the • HVAC set to MAX A/C. brake pedal depressed. • Engine has not reached normal operating temperature. The engine will shut down, the tachometer will move to •...
Page 235: To Start The Engine While In Autostop Mode
STARTING AND OPERATING 233 To Start The Engine While In Autostop Mode Conditions That Force An Application Of The Electric Park Brake While In Autostop Mode: While in a forward gear, the engine will start when the • The driver’s door is open and brake pedal released. brake pedal is released or the throttle pedal is depressed.
Page 236: Starting And Operating To Manually Turn Off The Stop/Start System
234 STARTING AND OPERATING To Manually Turn Off The Stop/Start System To Manually Turn On The Stop/Start System Push the STOP/START Off switch (located on the switch 1. Push the STOP/START Off switch (located on the bank). The light on the switch will turn off. switch bank).
Page 237: To Activate
STARTING AND OPERATING 235 To Activate Push the On/Off button to activate the Speed Control. The cruise indicator light in the instrument cluster display will illuminate. To turn the system off, push the On/Off button a second time. The cruise indicator light will turn off. The system should be turned off when not in use.
Page 238: To Vary The Speed Setting
236 STARTING AND OPERATING To Vary The Speed Setting • If the button is continually pushed, the set speed will continue to increase until the button is released, then the To Increase Speed new set speed will be established. When the Speed Control is set, you can increase speed by To Decrease Speed pushing the SET (+) button.
Page 239: To Accelerate For Passing
STARTING AND OPERATING 237 Metric Speed (km/h) WARNING! • Pushing the SET (-) button once will result in a 1 km/h Speed Control can be dangerous where the system decrease in set speed. Each subsequent tap of the button cannot maintain a constant speed. Your vehicle could results in a decrease of 1 km/h.
Page 240: Adaptive Cruise Control (Acc) - If Equipped
238 STARTING AND OPERATING ADAPTIVE CRUISE CONTROL (ACC) — • Normal (Fixed Speed) Cruise Control mode for cruising IF EQUIPPED at a constant preset speed. For additional information, refer to “Normal (Fixed Speed) Cruise Control Mode” in Adaptive Cruise Control (ACC) increases the driving con- this section.
Page 241: Adaptive Cruise Control (Acc) Operation
STARTING AND OPERATING 239 Adaptive Cruise Control (ACC) Operation WARNING! (Continued) The speed control buttons (located on the right side of the • The ACC system: steering wheel) operate the ACC system. • Does not react to pedestrians, oncoming vehicles, and stationary objects (e.g., a stopped vehicle in a traffic jam or a disabled vehicle).
Page 242: To Activate/Deactivate
240 STARTING AND OPERATING NOTE: Any chassis/suspension or tire size modifications to the vehicle will effect the performance of the Adaptive Cruise Control and Full Brake Control System. To Activate/Deactivate Push and release the Adaptive Cruise Control (ACC) on/off button. The ACC menu in the instrument cluster display will read “ACC Ready.”...
Page 243: Activating Adaptive Cruise Control (Acc)
STARTING AND OPERATING 241 Activating Adaptive Cruise Control (ACC) To Set A Desired ACC Speed The minimum set speed for the ACC system is 20 mph When the vehicle reaches the speed desired, push the (32 km/h) and the maximum speed is 100 mph (160 km/h). SET (+) button or the SET (-) button and release.
Page 244: To Turn Off
242 STARTING AND OPERATING • The braking temperature exceeds normal range (over- WARNING! heated). The Resume function should only be used if traffic • The Electronic Stability Control/Traction Control Sys- and road conditions permit. Resuming a set speed that tem (ESC/TCS) activates. is too high or too low for prevailing traffic and road •...
Page 245 STARTING AND OPERATING 243 • If the button is continually pushed, the set speed will U.S. Speed (mph) continue to increase in 5 mph increments until the • Pushing the SET (-) button once will result in a 1 mph button is released.
Page 246: Setting The Following Distance In Acc
244 STARTING AND OPERATING • When you use the SET (-) button to decelerate, if the Setting The Following Distance In ACC engine’s braking power does not slow the vehicle suffi- The specified following distance for ACC can be set by ciently to reach the set speed, the brake system will varying the distance setting between four bars (longest), automatically slow the vehicle.
Page 247 STARTING AND OPERATING 245 Distance Setting 3 Bars (Long) Distance Setting 2 Bars (Medium)
Page 248 246 STARTING AND OPERATING The vehicle will then maintain the set distance until: • The vehicle ahead accelerates to a speed above the set speed. • The vehicle ahead moves out of your lane or view of the sensor. • The distance setting is changed. •...
Page 249: Overtake Aid
STARTING AND OPERATING 247 Adaptive Cruise Control (ACC) Menu The instrument cluster display shows the current ACC system settings. The instrument cluster display is located in the center of the instrument cluster. The information it displays depends on ACC system status. Push the Adaptive Cruise Control (ACC) on/off button (located on the steering wheel) until one of the following shows in the instrument cluster display:...
Page 250: Display Warnings And Maintenance
248 STARTING AND OPERATING The ACC screen may display once again if any ACC The “ACC Front Radar Sensor Temporarily Blocked” mes- activity occurs, which may include any of the following: sage can sometimes be displayed while driving in highly reflective areas (i.e.
Page 251 STARTING AND OPERATING 249 • Do not remove any screws from the sensor. Doing so “Clean Front Windshield” Warning could cause an ACC system malfunction or failure and The “ACC/FCW Limited Functionality Wipe Front Wind- require a sensor realignment. shield” warning will display when conditions temporarily •...
Page 252: Precautions While Driving With Acc
250 STARTING AND OPERATING When the condition that created limited functionality is no Towing A Trailer longer present, the system will return to full functionality. Towing a trailer is not advised when using ACC. NOTE: If the “ACC/FCW Limited Functionality Wipe Offset Driving Front Windshield”...
Page 253 STARTING AND OPERATING 251 Turns And Bends Using ACC On Hills When driving on a curve with ACC engaged, the system When driving on hills, ACC may not detect a vehicle in may decrease the vehicle speed and acceleration for stabil- your lane.
Page 254 252 STARTING AND OPERATING Lane Changing Narrow Vehicles ACC may not detect a vehicle until it is completely in the Some narrow vehicles traveling near the outer edges of the lane in which you are traveling. In the illustration shown, lane or edging into the lane are not detected until they have ACC has not yet detected the vehicle changing lanes and it moved fully into the lane.
Page 255: General Information
STARTING AND OPERATING 253 General Information Stationary Objects And Vehicles ACC does not react to stationary objects and stationary The following regulatory statement applies to all Radio vehicles. For example, ACC will not react in situations Frequency (RF) devices equipped in this vehicle: where the vehicle you are following exits your lane and the This device complies with Part 15 of the FCC Rules and vehicle ahead is stopped in your lane.
Page 256: Normal (Fixed Speed) Cruise Control Mode
254 STARTING AND OPERATING Normal (Fixed Speed) Cruise Control Mode To Set A Desired Speed In addition to Adaptive Cruise Control mode, a Normal (Fixed Speed) Cruise Control mode is available for cruising Turn the Normal (Fixed Speed) Cruise Control at fixed speeds.
Page 257 STARTING AND OPERATING 255 U.S. Speed (mph) The driver’s preferred units can be selected through the instrument panel settings. Refer to ”Instrument Cluster • Pushing the SET (+) button once will result in a 1 mph Display” in “Getting To Know Your Instrument Panel” for increase in set speed.
Page 258: Rear Park Assist - If Equipped
256 STARTING AND OPERATING To Cancel To Turn Off The following conditions will cancel the Normal (Fixed The system will turn off and erase the set speed in memory Speed) Cruise Control without clearing the memory: • The brake pedal is applied. •...
Page 259: Park Assist Sensors
STARTING AND OPERATING 257 Park Assist Sensors Chime The four Park Assist sensors, located in the rear fascia/ By shifting the vehicle in REVERSE, and in the case of the bumper, monitor the area behind the vehicle that is within presence of a rear obstacle, an acoustic signal that varies the sensors’...
Page 260: Enabling And Disabling Park Assist
258 STARTING AND OPERATING Detection Distances The color on the display depends on the distance and location of the obstacle. If the sensors detect more obstacles, it is taken into account Enabling And Disabling Park Assist only what is the shorter distance. Instrument Cluster Display Park Assist can be enabled and disabled with the Park Assist switch.
Page 261: Service The Rear Park Assist System
STARTING AND OPERATING 259 rear fascia/bumper is clean and clear of snow, ice, mud, CAUTION! dirt or other obstructions, and then cycle the ignition. If the message continues to appear, see an authorized dealer. After turning the ignition to STOP, the Park Assist remains in this setting until the next key cycle.
Page 262 260 STARTING AND OPERATING • Objects such as bicycle carriers, etc., must not be placed WARNING! (Continued) within 12 inches (30 cm) from the rear fascia/bumper rear fascia when the loudspeaker sounds the con- while driving the vehicle. Failure to do so can result in tinuous tone.
Page 263: Front And Rear Park Assist - If Equipped
STARTING AND OPERATING 261 If it’s necessary to keep the trailer hitch and hitch ball Reducing the speed approximately below 9 mph assembly mounted for a long period, it is possible to filter (15 km/h), the system will come back active. When the out the trailer hitch and hitch ball assembly presence in vehicle is moving in REVERSE, the system will remain sensor field of view.
Page 264: Park Assist Warning Display
262 STARTING AND OPERATING Park Assist Warning Display display will show the single arc moving closer to the vehicle and the audible chime will increase as the objects The Park Assist Warning screen will only be displayed if gets closer to the vehicle. “Sound and Display”...
Page 265 STARTING AND OPERATING 263 Slow Tone/Solid Arc Fast Tone/Flashing Arc Slow Tone/Solid Arc Fast Tone/Flashing Arc...
Page 266 264 STARTING AND OPERATING The vehicle is close to the obstacle when the warning display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert opera- tion when the system is detecting an obstacle: Continuous Tone/Flashing Arc WARNING ALERTS Rear...
Page 267 STARTING AND OPERATING 265 WARNING ALERTS Rear Greater 59-52 in 52-41 in 41-34 in 34-24 in 24-12 in Less than Distance than (150-130 (130-105 (105-85 cm) (85-60 cm) (60-30 cm) 12 in (in/cm) 59 in (30 cm) (150 cm) Arcs — None None None...
Page 268 266 STARTING AND OPERATING If an obstacle is detected in the left and/or right front region, the display will show a single flashing arc in the left and/or right front region . As the vehicle moves closer to the obstacle, the display will show the single arc moving closer to the vehicle and the audible chime will increase as the objects gets close to the vehicle.
Page 269 STARTING AND OPERATING 267 The vehicle is close to the obstacle when the warning display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert opera- tion when the system is detecting an obstacle: Continuous Tone/Flashing Arc WARNING ALERTS Front Distance...
Page 270: Enabling And Disabling Park Assist
268 STARTING AND OPERATING Enabling And Disabling Park Assist NOTE: Park Assist will reduce the volume of the radio, if on, when the system is sounding an audible tone. Park Assist can be enabled and disabled with the Park Front Park Assist Audible Alerts Assist switch, located on the switch panel below the Uconnect display.
Page 271: Cleaning The Park Assist System
STARTING AND OPERATING 269 LANESENSE — IF EQUIPPED SENSORS , or the PARK ASSIST UNAVAILABLE SER- VICE REQUIRED message for five seconds. LaneSense Operation If PARK ASSIST UNAVAILABLE WIPE REAR SENSORS The LaneSense system is operational at speeds above or PARK ASSIST UNAVAILABLE WIPE FRONT SEN- 37 mph (60 km/h) and below 112 mph (180 km/h).
Page 272: Turning Lanesense On Or Off
270 STARTING AND OPERATING LaneSense Warning Message the driver to remain within the lane. When only a single lane marking is detected, a haptic (torque) warning will not The LaneSense system will indicate the current lane drift be provided. condition through the instrument cluster display. NOTE: When operating conditions have been met, the Base Instrument Cluster Display LaneSense system will monitor if the driver’s hands are on...
Page 273 STARTING AND OPERATING 271 Left Lane Departure — Only Left Lane Detected NOTE: The LaneSense system operates with the similar behavior for a right lane departure when only the right • When the LaneSense system is on, the LaneSense indi- lane marking has been detected.
Page 274 272 STARTING AND OPERATING • When the LaneSense system senses a lane drift situation, line remains solid yellow. The LaneSense indicator the left thick lane line and left thin line turn solid yellow. changes from solid yellow to flashing yellow. At this The LaneSense indicator changes from solid green to time torque is applied to the steering wheel in the solid yellow.
Page 275: Changing Lanesense Status
STARTING AND OPERATING 273 Changing LaneSense Status The LaneSense system has settings to adjust the intensity of the torque warning and the warning zone sensitivity (early/late) that you can configure through the Uconnect system screen. Refer to “Uconnect Settings” in “Multime- dia”...
Page 276 274 STARTING AND OPERATING A touchscreen button to disable the camera is available WARNING! when the vehicle is not in REVERSE. Display of the camera image after shifting out of REVERSE can be disabled via Drivers must be careful when backing up even when Uconnect Settings.
Page 277: Adding Fuel
STARTING AND OPERATING 275 ADDING FUEL The Capless Fuel System uses a flapper placed at the filler pipe of the fuel tank; it opens and closes automatically upon insertion/extraction of the fuel nozzle. The Capless Fuel System is designed so that it prevents the filling of an incorrect type of fuel.
Page 278 276 STARTING AND OPERATING Emergency Refueling Procedure If the vehicle is out of fuel, proceed as follows: 1. Open the liftgate and remove the emergency fuel fill funnel located in the cargo area. Filler Pipe 3. Before removing the nozzle, wait at least 10 seconds to allow the fuel to flow inside of the tank.
Page 279 STARTING AND OPERATING 277 3. Insert the emergency fuel fill funnel in the filler pipe and proceed to fill the fuel tank. Emergency Fuel Fill Funnel — If Equipped With Full Size Spare Tire 2. Open the fuel door. Fueling With Emergency Fuel Fill Funnel 4.
Page 280: Vehicle Loading
278 STARTING AND OPERATING Gross Vehicle Weight Rating (GVWR) WARNING! (Continued) The GVWR is the total permissible weight of your vehicle • The use of objects/plugs do not comply with the including driver, passengers, vehicle, options and cargo. vehicle and may cause pressure increases inside the The label also specifies maximum capacities of front and tank, creating dangerous conditions.
Page 281 STARTING AND OPERATING 279 Tire Size The entire vehicle should first be weighed on a commercial scale to insure that the GVWR has not been exceeded. The The tire size on the Vehicle Certification Label represents weight on the front and rear of the vehicle should then be the actual tire size on your vehicle.
Page 282: Trailer Towing
280 STARTING AND OPERATING TRAILER TOWING The recommended way to measure GTW is to put your fully loaded trailer on a vehicle scale. The entire weight of In this section you will find safety tips and information on the trailer must be supported by the scale. limits to the type of towing you can reasonably do with your vehicle.
Page 283: Trailer Hitch Classification
STARTING AND OPERATING 281 Frontal Area for a more level ride, offering more consistent steering and brake control thereby enhancing towing safety. The addi- The frontal area is the maximum height multiplied by the tion of a friction/hydraulic sway control also dampens maximum width of the front of a trailer.
Page 284: Trailer Towing Weights (Maximum Trailer Weight Ratings)
282 STARTING AND OPERATING Trailer Hitch Classification Definitions Class Max. Trailer Hitch Industry Standards Class I - Light Duty 2,000 lbs (907 kg) Class II - Medium Duty 3,500 lbs (1,587 kg) Class III - Heavy Duty 5,000 lbs (2,267 kg) Class IV - Extra Heavy Duty 10,000 lbs (4,535 kg) Refer to the “Trailer Towing Weights (Maximum Trailer Weight Ratings)”...
Page 285: Trailer And Tongue Weight
STARTING AND OPERATING 283 Trailer And Tongue Weight NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional Never exceed the maximum tongue weight stamped on factory-installed options or dealer-installed options must your bumper or trailer hitch.
Page 286 284 STARTING AND OPERATING WARNING! (Continued) CAUTION! • When hauling cargo, or towing a trailer, do not • Do not tow a trailer at all during the first 500 miles overload your vehicle or trailer. Overloading can (805 km) the new vehicle is driven. The engine, axle cause a loss of control, poor performance, or damage or other parts could be damaged.
Page 287 STARTING AND OPERATING 285 • When replacing tires, refer to “Tires – General Informa- WARNING! tion” in “Servicing And Maintenance” for the proper tire • Do not connect trailer brakes to your vehicle’s hy- replacement procedures. Replacing tires with a higher load carrying capacity will not increase the vehicle’s draulic brake lines.
Page 288 286 STARTING AND OPERATING Towing Requirements — Trailer Lights And Wiring (If Equipped) Whenever you pull a trailer, regardless of the trailer size, stoplights and turn signals on the trailer are required for motoring safety. The Trailer Tow Package may include a four- and seven-pin wiring harness.
Page 289: Towing Tips
STARTING AND OPERATING 287 Automatic Transmission — If Equipped Select the DRIVE range when towing. The transmission controls include a drive strategy to avoid frequent shifting when towing. However, if frequent shifting does occur while in DRIVE, you can use the AutoStick shift control to manually select a lower gear.
Page 290: Recreational Towing (Behind Motorhome, Etc.)
288 STARTING AND OPERATING Speed Control — If Equipped Cooling System • Do not use in hilly terrain or with heavy loads. To reduce potential for engine and transmission overheat- ing, take the following actions: • When using the speed control, if you experience speed drops greater than 10 mph (16 km/h), disengage until City Driving you can get back to cruising speed.
Page 291: Driving Tips
STARTING AND OPERATING 289 DRIVING TIPS NOTE: You must ensure that the Auto Park Brake feature is disabled before towing this vehicle, to avoid inadvertent Driving On Slippery Surfaces Electric Park Brake engagement. The Auto Park Brake Information in this section will aid in safe controlled feature is enabled or disabled via the Customer Program- launches in adverse conditions.
Page 292: Driving Through Water
290 STARTING AND OPERATING Driving Through Water Traction When driving on wet or slushy roads, it is possible for a Driving through water more than a few inches/centimeters wedge of water to build up between the tire and road deep will require extra caution to ensure safety and pre- surface.
Page 293 STARTING AND OPERATING 291 Shallow Standing Water CAUTION! Although your vehicle is capable of driving through shal- • Always check the depth of the standing water before low standing water, consider the following Cautions and driving through it. Never drive through standing Warnings before doing so.
Page 295 IN CASE OF EMERGENCY CONTENTS ▫ Jack Location/Spare Tire Stowage — HAZARD WARNING FLASHERS ... .295 If Equipped ......319 BULB REPLACEMENT .
Page 296 294 IN CASE OF EMERGENCY ▫ Tow Eye Usage — If Equipped ... . .340 IF YOUR ENGINE OVERHEATS ... . .335 GEAR SELECTOR OVERRIDE .
Page 297: Hazard Warning Flashers
IN CASE OF EMERGENCY 295 HAZARD WARNING FLASHERS BULB REPLACEMENT General Information The Hazard Warning flasher switch is located on the switch bank below the radio. • Before you replace a bulb, check the contacts to be sure they are not oxidized. Push the switch to turn on the Hazard Warning Flasher.
Page 298: Replacement Bulbs
296 IN CASE OF EMERGENCY Replacement Bulbs Interior Bulbs Lamps Bulb Number Front Courtesy Light Front Courtesy Lights (Sun Visors) Rear Dome Light (Models Without Retractable Roof) Rear Interior Lights (Models With Retractable Roof) Interior Lights Dome Light (Glove Compartment) Exterior Bulbs Lamps Bulb Number...
Page 299: Replacing Exterior Bulbs
IN CASE OF EMERGENCY 297 Lamps Bulb Number Center High Mounted Stop Lamp (CHMSL) LED (Serviced At An Authorized Dealer) Reverse P21W License Plate Lamp Replacing Exterior Bulbs Hi/Lo Beam Light Halogen Headlamps To replace the bulbs proceed as follows: 1.
Page 300 298 IN CASE OF EMERGENCY 2. Rotate the headlamp bulb socket counterclockwise then pull outwards. Headlamp Bulb Connector 4. Install the new headlamp bulb making sure it is prop- erly locked. Headlamp Bulb Socket 3. Release the locking tab on the headlamp bulb connector and remove the bulb and socket.
Page 301 IN CASE OF EMERGENCY 299 5. Install the headlamp bulb and socket; align the tabs and LED Main Beam/Dipped Beam Headlights — If Equipped turn it clockwise making sure it is properly locked. For replacing these bulbs, contact an authorized dealer- ship.
Page 302 300 IN CASE OF EMERGENCY Light Access Bulb Assembly 1 — Screws 1 — Bulb Holder 2 — Access Door 2 — Bulb 3. Turn the bulb and bulb holder assembly counter- 5. Finally, refit the inspection door, fully tightening fixing clockwise and then remove it sliding it outwards.
Page 303 IN CASE OF EMERGENCY 301 Front Fog Lights 4. Replace the bayonet-fitted bulb. To replace the bulbs proceed as follows: 1. Turn the front wheels completely. 2. Use a suitable tool to remove the access door. Bulb Assembly 1 — Bulb Holder 2 —...
Page 304 302 IN CASE OF EMERGENCY Side Indicators on External Rear View Mirrors – If Equipped 2. Remove the transparent lens assembly as shown. 3. Remove the bulb socket and bulb from the transparent CAUTION! lens assembly by rotating the socket counterclockwise. The procedure is described as a guideline.
Page 305 IN CASE OF EMERGENCY 303 Rear Tail Lamps Brake Lights The brake lights are LED-type. For replacing these bulbs, contact an authorized dealership. Side Marker Side marker lights are LED-type. For replacing these bulbs, contact an authorized dealer 3th Stop Lamp The CHMSL is LED.
Page 306 304 IN CASE OF EMERGENCY 5. Reposition the bulb holder assembly in the headlight body, proceed until you hear the tabs click. 6. Reinstall tail lamp assembly and close liftgate. License Plate Lights To replace the bulbs proceed as follows: 1.
Page 307 IN CASE OF EMERGENCY 305 License Plate Light Lamp Assembly 2. Remove the bulbs from the individual side contacts. 1 — Bulb Holder 2 — Bulb 3. Insert the new bulbs, and ensure that they are properly locked between the contacts. 4.
Page 308: Replacing Interior Bulbs
306 IN CASE OF EMERGENCY Replacing Interior Bulbs Front Courtesy Light To replace the bulbs proceed as follows: 1. Using a suitable tool remove the front courtesy light as shown. Front Courtesy Bulb Housing 1 — Retaining Clips 2 — Bulb Housing 3.
Page 309 IN CASE OF EMERGENCY 307 Dome Light Vanity Mirror To replace the bulbs proceed as follows: 1. Lift the cover of the mirror and pull out the visor mirror light cover. 2. Replace the bulb, releasing it from the side contacts, and then insert the new bulb, making sure that it is properly locked between the contacts.
Page 310 308 IN CASE OF EMERGENCY Dome Light Glove Compartment Rear Dome Light — Without Retractable Roof To replace the bulb proceed as follows: To replace the bulbs proceed as follows: 1. Open the glove compartment. 1. Using a suitable tool release the lamp assembly at both the ends.
Page 311 IN CASE OF EMERGENCY 309 Dome Light To replace the bulbs proceed as follows: 1. Lower the handle in the direction shown remove the dome light. Bulb 3. Insert the new bulb, locking it between the contacts. 4. Reinstall the dome light. Interior Cargo Lights Retractable Roof Light To replace the bulbs proceed as follows:...
Page 312: Fuses
310 IN CASE OF EMERGENCY WARNING! (Continued) the technical characteristics can cause malfunctions with the risk of fire. • Halogen lamps contain gas under pressure, in the event of breakage be careful of the projection of fragments of glass. • Halogen lamps must be handled by touching only the metallic part.
Page 313: General Information
IN CASE OF EMERGENCY 311 Also please be aware that when using power outlets for WARNING! (Continued) extended periods of time with the engine off may result in to use proper fuses may result in serious personal vehicle battery discharge. injury, fire and/or property damage.
Page 314: Access To The Fuses
312 IN CASE OF EMERGENCY Engine Compartment Fuses/Distribution Unit Fuse Removal To replace a fuse use the extractor attached to the fuse The engine compartment fuse panel is located on the left cover (located on the inside of the engine compartment side of the engine compartment.
Page 315 IN CASE OF EMERGENCY 313 Mounting Fuse Cover and Locking Screw Proceed as follows: 1. Properly secure the fuse cover to the box, slide com- pletely from top to bottom. 2. Fully depress the screw, using the special screwdriver supplied. 3.
Page 316 314 IN CASE OF EMERGENCY Cavity Maxi Fuse Cartage Fuse Mini Fuse Description 70 Amp Tan – – Module Body Computer 60 Amp Blue – – Module Body Computer, Rear Distribution Units – 20 Amp Blue – Controller Power Supply Body Computer –...
Page 317 IN CASE OF EMERGENCY 315 Cavity Maxi Fuse Cartage Fuse Mini Fuse Description – – 5 Amp Tan Electronic Power Four-Wheel Drive – – 15 Amp Blue Fuel Pump – – 10 Amp Red Supply Primary Loads – – 20 Amp Yellow (Cus- Power Outlet (Battery Powered) tomer Installed) –...
Page 318: Body Computer Fuse Center
316 IN CASE OF EMERGENCY Body Computer Fuse Center The controller is located at the left side of the steering column at the bottom of the instrument panel. For the fuse replacement see an authorized dealer. Body Controller Fuse Cavities...
Page 319 IN CASE OF EMERGENCY 317 Cavity Mini Fuse Description 7.5 Amp Brown Fan Air Conditioning, Power Socket 20 Amp Yellow Power Window Front (Passenger Side) 20 Amp Yellow Power Window Front (Driver’s Side) 15 Amp Blue Supply Uconnect System, Air Conditioning, USB Port, Rear lateral ceiling light in case of open roof, EOBD port 10 Amp Red System Power Forward Collision Warning Plus, All Wheel Drive (AWD), IPC,...
Page 320: Rear Cargo Fuse/Relay Distribution Unit
318 IN CASE OF EMERGENCY Rear Cargo Fuse/Relay Distribution Unit Push on the left side of the access door to unhinge and remove. To access the fuses, remove the access door from the left rear panel of the rear cargo area. Rear Cargo Fuse Cavities Access Door Location Cavity...
Page 321: Jacking And Tire Changing
IN CASE OF EMERGENCY 319 JACKING AND TIRE CHANGING Jack Location/Spare Tire Stowage — If Equipped The jack and tools are located in the rear storage compart- WARNING! ment if equipped, inside a special container. • Do not attempt to change a tire on the side of the vehicle close to moving traffic.
Page 322 320 IN CASE OF EMERGENCY Load Floor Handle Spare Tire Fastener 3. Remove the fastener securing the spare tire. 4. Remove the jack, wheel bolt wrench, and wheel chocks (if equipped).
Page 323: Preparations For Jacking
IN CASE OF EMERGENCY 321 WARNING! A loose tire or jack thrown forward in a collision or hard stop could endanger the occupants of the vehicle. Always stow the jack parts and the spare tire in the places provided. Have the deflated (flat) tire repaired or replaced immediately.
Page 324: Jacking Instructions
322 IN CASE OF EMERGENCY 2. Turn on the Hazard Warning flasher. WARNING! (Continued) 3. Apply the Electric Park Brake. • Chock the wheel diagonally opposite the wheel to be raised. 4. Place the gear selector into PARK. • Apply the parking brake and place an automatic 5.
Page 325 IN CASE OF EMERGENCY 323 3. Before raising the vehicle, use the wheel bolt wrench to loosen, but not remove, the wheel bolts on the wheel with the flat tire. Turn the wheel bolts counterclockwise one turn while the wheel is still on the ground. Jack Warning Label CAUTION! Do not attempt to raise the vehicle by jacking on...
Page 326 324 IN CASE OF EMERGENCY Jacking Locations Front Jacking Location...
Page 327 IN CASE OF EMERGENCY 325 Front Jacking Engagement Point Rear Jacking Location...
Page 328 326 IN CASE OF EMERGENCY CAUTION! Be sure to mount the spare tire with the valve stem facing outward. The vehicle could be damaged if the spare tire is mounted incorrectly. Rear Jacking Engagement Point 5. Raise the vehicle just enough to remove the flat tire. WARNING! Raising the vehicle higher than necessary can make the vehicle less stable.
Page 329 IN CASE OF EMERGENCY 327 NOTE: 10. Finish tightening the wheel bolts. Push down on the wrench while at the end of the handle for increased • Your vehicle may be equipped with a compact spare leverage. Tighten the wheel bolts in a star pattern until tire or a limited-use spare tire.
Page 330: Road Tire Installation
328 IN CASE OF EMERGENCY Road Tire Installation 4. Finish tightening the wheel bolts. Push down on the wrench while at the end of the handle for increased 1. Mount the road tire on the axle. leverage. Tighten the wheel bolts in a star pattern until 2.
Page 331: Tire Service Kit - If Equipped
IN CASE OF EMERGENCY 329 TIRE SERVICE KIT — IF EQUIPPED Tire Service Kit Components And Operation Tire Service Kit Storage The Tire Service Kit is located in the rear storage compart- ment inside a storage container. Located inside the con- tainer are a screwdriver and the emergency fuel funnel.
Page 332 330 IN CASE OF EMERGENCY 1. Remove the Tire Service Kit from the vehicle, take it out WARNING! from the bag and place it near the punctured tire. Screw the clear flexible filling tube to the tire valve. Tire Service Kit is not a permanent flat tire repair. Have the tire inspected and repaired or replaced after using 2.
Page 333: Tire Service Kit Usage Precautions
IN CASE OF EMERGENCY 331 Tire Service Kit Usage Precautions WARNING! (Continued) vehicle. Always stow the Tire Service Kit in the place WARNING! provided. Failure to follow these warnings can result • Do not attempt to seal a tire on the side of the vehicle in injuries that are serious or fatal to you, your closest to traffic.
Page 334: Replacing The Sealant
332 IN CASE OF EMERGENCY Replacing The Sealant JUMP STARTING If your vehicle has a discharged battery it can be jump NOTE: Replace the sealant canister prior to the expiration started using a set of jumper cables and a battery in another date at an authorized dealer.
Page 335: Preparations For Jump Start
IN CASE OF EMERGENCY 333 Preparations For Jump Start WARNING! The battery in your vehicle is located in the front of the • Take care to avoid the radiator cooling fan whenever engine compartment, behind the left headlight assembly. the hood is raised. It can start anytime the ignition switch is ON.
Page 336: Jump Starting Procedure
334 IN CASE OF EMERGENCY 3. Connect the negative (-) end of the jumper cable to the WARNING! negative (-) post of the booster battery. Do not allow vehicles to touch each other as this could 4. Connect the opposite end of the negative (-) jumper establish a ground connection and personal injury cable to a good engine ground (exposed metal part of could result.
Page 337: If Your Engine Overheats
IN CASE OF EMERGENCY 335 IF YOUR ENGINE OVERHEATS 2. Disconnect the opposite end of the negative (-) jumper cable from the negative (-) post of the booster battery. In any of the following situations, you can reduce the potential for overheating your engine by taking the appro- 3.
Page 338: Gear Selector Override
336 IN CASE OF EMERGENCY • You can also turn the temperature control to maximum GEAR SELECTOR OVERRIDE heat, the mode control to floor and the blower control to If a malfunction occurs and the gear selector cannot be high. This allows the heater core to act as a supplement moved out of the PARK position, you can use the following to the radiator and aids in removing heat from the procedure to temporarily move the gear selector:...
Page 339 IN CASE OF EMERGENCY 337 Removing Gear Selector Bezel Gear Selector Override Location 4. Press and maintain firm pressure on the brake pedal. 6. Move the gear selector to the NEUTRAL position. 5. Insert a small screwdriver or similar tool down into the 7.
Page 340: Freeing A Stuck Vehicle
338 IN CASE OF EMERGENCY FREEING A STUCK VEHICLE WARNING! If your vehicle becomes stuck in mud, sand or snow, it can Fast spinning tires can be dangerous. Forces generated often be moved using a rocking motion. Turn the steering by excessive wheel speeds may cause damage, or even wheel right and left to clear the area around the front failure, of the axle and tires.
Page 341: Towing A Disabled Vehicle
IN CASE OF EMERGENCY 339 TOWING A DISABLED VEHICLE CAUTION! (Continued) This section describes procedures for towing a disabled • Revving the engine or spinning the wheels too fast vehicle using a commercial towing service. may lead to transmission overheating and failure. It can also damage the tires.
Page 342: All Wheel Drive (Awd) Models
340 IN CASE OF EMERGENCY All Wheel Drive (AWD) Models Tow Eye Usage — If Equipped The manufacturer requires towing with all four wheels Your vehicle is equipped with a tow eye that can be used to OFF the ground. Acceptable methods are to tow the vehicle move a disabled vehicle.
Page 343 IN CASE OF EMERGENCY 341 Tow Eye Usage Precautions CAUTION! • The tow eye must only be used for roadside emer- gencies. Use with an appropriate device in accor- dance with highway code (a rigid bar or rope) to maneuver the vehicle in preparation for transport via a tow truck.
Page 344 342 IN CASE OF EMERGENCY Front Tow Eye Installation The front tow eye receptacle is located behind an access door, located on the right front bumper fascia. To install the tow eye, open the access door using the vehicle key or a small screwdriver, and thread the tow eye into the recep- tacle.
Page 345 IN CASE OF EMERGENCY 343 Rear Tow Eye Installation The rear tow eye receptacle is located behind a access door on the rear bumper fascia. To install the tow eye, open the access door using the vehicle key or a small screwdriver, and thread the tow eye into the receptacle.
Page 346: Enhanced Accident Response System (Ears)
344 IN CASE OF EMERGENCY ENHANCED ACCIDENT RESPONSE SYSTEM (EARS) This vehicle is equipped with an Enhanced Accident Response System. Please refer to “Occupant Restraint Systems” in “Safety” for further information on the Enhanced Accident Re- sponse System (EARS) function. EVENT DATA RECORDER (EDR) This vehicle is equipped with an Event Data Recorder (EDR).
Page 347 SERVICING AND MAINTENANCE CONTENTS ▫ Body Lubrication ..... .359 SCHEDULED MAINTENANCE ... . .347 ▫...
Page 348 346 SERVICING AND MAINTENANCE ▫ Tire Rotation Recommendations ... .392 ▫ Body And Underbody Maintenance ..396 ▫ Preserving The Bodywork ....396 DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES .
Page 349: Scheduled Maintenance
SERVICING AND MAINTENANCE 347 SCHEDULED MAINTENANCE NOTE: Under no circumstances should oil change inter- vals exceed 10,000 miles (16,000 km), twelve months or 350 Your vehicle is equipped with an automatic oil change hours of engine run time, whichever comes first. The 350 indicator system.
Page 350: Maintenance Plan
348 SERVICING AND MAINTENANCE Maintenance Plan At Every Oil Change Interval As Indicated By Oil Change Indicator System: Required Maintenance Intervals Check and adjust hand brake. At Every Oil Change Interval As Indicated By Oil Inspect exhaust system. Change Indicator System: Inspect engine air filter if using in dusty or off-road Change oil and filter.
Page 351 SERVICING AND MAINTENANCE 349 Mileage or time passed (whichever comes first) Or Years: 1 Or Kilometers: Check and, if necessary, top up fluid levels (brakes/hydraulic • • • • • • • • • • • • • • • clutch, windshield washer, battery, engine coolant, etc.).
Page 352 350 SERVICING AND MAINTENANCE Mileage or time passed (whichever comes first) Or Years: 1 Or Kilometers: Inspect and replace, if required, front end accessory drive belt, • • tensioner, and, idler pulley.(3) Inspect and replace PCV valve if necessary. • In accordance with Oil Change Indicator System OR Severe Duty Change engine oil and replace oil filter.
Page 353: Heavy Duty Use Of The Vehicle
SERVICING AND MAINTENANCE 351 ** The spark plug change is distance based only, yearly climates, urban driving, long periods of idling), the maxi- intervals do not apply. The following are essential to ensure mum mileage is 60,000 km. The belt must be replaced every correct operation and prevent serious damage to the en- 4 years regardless of the mileage.
Page 354: Engine Compartment
352 SERVICING AND MAINTENANCE ENGINE COMPARTMENT 1.3L Turbo Engine 1 — Brake Fluid Reservoir 5 — Engine Coolant Pressure Cap 2 — Battery 6 — Engine Coolant Reservoir 3 — Power Distribution Center (Fuses) 7 — Oil Fill Cap/Engine Oil Dipstick 4 —...
Page 355: Checking Oil Level
SERVICING AND MAINTENANCE 353 Checking Oil Level CAUTION! To assure proper engine lubrication, the engine oil must be Overfilling or underfilling the crankcase will cause maintained at the correct level. Check the oil level at aeration or loss of oil pressure. This could damage your regular intervals, such as every fuel stop.
Page 356: Maintenance-Free Battery
354 SERVICING AND MAINTENANCE Maintenance-Free Battery CAUTION! Your vehicle is equipped with a maintenance-free battery. • It is essential when replacing the cables on the You will never have to add water, nor is periodic mainte- battery that the positive cable is attached to the nance required.
Page 357: Engine Oil
SERVICING AND MAINTENANCE 355 Engine Oil Viscosity (SAE Grade) — 1.3L Turbo WARNING! Engine You can be badly injured working on or around a Mopar SAE 0W-30 SN PLUS synthetic engine oil is recom- motor vehicle. Only do service work for which you mended for all operating temperatures.
Page 358: Engine Oil Filter
356 SERVICING AND MAINTENANCE Engine Oil Filter Selection CAUTION! This manufacturer’s engines have a full-flow type dispos- Do not use chemical flushes in your engine oil as the able oil filter. Use a filter of this type for replacement. The chemicals can damage your engine.
Page 359: Accessory Drive Belt Inspection
SERVICING AND MAINTENANCE 357 Engine Air Cleaner Filter Selection When inspecting accessory drive belts, small cracks that run across ribbed surface of belt from rib to rib, are The quality of replacement engine air cleaner filters varies considered normal. These are not a reason to replace belt. considerably.
Page 360: Air Conditioner Maintenance
358 SERVICING AND MAINTENANCE • Longitudinal belt cracking (cracks between two ribs) WARNING! • Belt slips • Use only refrigerants and compressor lubricants ap- • “Groove jumping (belt does not maintain correct posi- proved by the manufacturer for your air conditioning tion on pulley) system.
Page 361: Body Lubrication
SERVICING AND MAINTENANCE 359 Refrigerant Recovery And Recycling — R–1234yf hood latch, release mechanism and safety catch should be cleaned and lubricated. R–1234yf Air Conditioning Refrigerant is a hydrofluo- roolefin (HFO) that is endorsed by the Environmental The external lock cylinders should be lubricated twice a Protection Agency and is an ozone-friendly substance with year, preferably in the Fall and Spring.
Page 362 360 SERVICING AND MAINTENANCE The wiper blades and wiper arms should be inspected To have a correct activation of strategy, the Service Position periodically, not just when wiper performance problems command (antipanic) must be active for at least half a are experienced.
Page 363: Exhaust System
SERVICING AND MAINTENANCE 361 Front Wiper Blade Removal/Installation Rear Wiper Blade Removal/Installation 1. Lift the front wiper arm upward to raise the wiper blade 1. Carefully lift the rear wiper arm upward to raise the off of the windshield. wiper blade off of the liftgate glass. 2.
Page 364 362 SERVICING AND MAINTENANCE system inspected each time the vehicle is raised for lubri- CAUTION! (Continued) cation or oil change. Replace as required. • Damage to the catalytic converter can result if your vehicle is not kept in proper operating condition. In WARNING! the event of engine malfunction, particularly involv- •...
Page 365: Cooling System
SERVICING AND MAINTENANCE 363 To minimize the possibility of catalytic converter damage: WARNING! (Continued) • Do not interrupt the ignition when the transmission is in • When working near the radiator cooling fan, discon- gear and the vehicle is in motion. nect the fan motor lead or turn the ignition to the •...
Page 366 364 SERVICING AND MAINTENANCE Cooling System — Drain, Flush And Refill in an emergency, the cooling system will need to be drained, flushed, and refilled with fresh OAT coolant NOTE: Some vehicles require special tools to add coolant (conforming to MS.90032), by an authorized dealer as properly.
Page 367 SERVICING AND MAINTENANCE 365 (240,000 km) before replacement. To prevent reducing this NOTE: extended maintenance period, it is important that you use • It is the owner’s responsibility to maintain the proper the same engine coolant (OAT coolant conforming to level of protection against freezing according to the MS.90032) throughout the life of your vehicle.
Page 368 366 SERVICING AND MAINTENANCE The cap should be inspected and cleaned if there is any Coolant Level accumulation of foreign material on the sealing surfaces. The coolant expansion bottle provides a quick visual method for determining that the coolant level is adequate. WARNING! With the engine off and cold, the level of the coolant (antifreeze) in the bottle should be between the “MAX”...
Page 369: Brake System
SERVICING AND MAINTENANCE 367 If an examination of your engine compartment shows no the correct type thermostat. Other designs may result in evidence of radiator or hose leaks, the vehicle may be unsatisfactory engine coolant (antifreeze) performance, safely driven. The vapor will soon dissipate. poor gas mileage, and increased emissions.
Page 370 368 SERVICING AND MAINTENANCE level up to the requirements described on the brake fluid WARNING! reservoir. Fluid level can be expected to fall as the brake • Use only manufacturer’s recommended brake fluid. pads wear. The brake fluid level should be checked when the pads are replaced.
Page 371: Automatic Transmission
SERVICING AND MAINTENANCE 369 WARNING! (Continued) CAUTION! • Do not allow petroleum based fluid to contaminate Using a transmission fluid other than the manufactur- the brake fluid. Brake seal components could be er’s recommended fluid may cause deterioration in damaged, causing partial or complete brake failure. transmission shift quality and/or torque converter This could result in a collision.
Page 372: Raising The Vehicle
370 SERVICING AND MAINTENANCE Fluid Level Check Routine fluid and filter changes are not required. However, change the fluid and filter if the fluid becomes contami- The fluid level is preset at the factory and does not require nated (with water, etc.), or if the transmission is disas- adjustment under normal operating conditions.
Page 373: Tires
SERVICING AND MAINTENANCE 371 TIRES NOTE: • P (Passenger) — Metric tire sizing is based on U.S. Tire Safety Information design standards. P-Metric tires have the letter “P” Tire safety information will cover aspects of the following molded into the sidewall preceding the size designation. information: Tire Markings, Tire Identification Numbers, Tire Example: P215/65R15 95H.
Page 374 372 SERVICING AND MAINTENANCE Tire Sizing Chart EXAMPLE: Example Size Designation: P215/65R15XL 95H, 215/65R15 96H, LT235/85R16C, T145/80D18 103M, 31x10.5 R15 LT P = Passenger car tire size based on U.S. design standards, or ..blank..= Passenger car tire based on European design standards, or LT = Light truck tire based on U.S.
Page 375 SERVICING AND MAINTENANCE 373 EXAMPLE: H = Speed Symbol – A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under cer- tain operating conditions – The maximum speed corresponding to the speed symbol should only be achieved under specified operating condi- tions (i.e., tire pressure, vehicle loading, road conditions, and posted speed limits) Load Identification: Absence of the following load identification symbols on the sidewall of the tire indicates a Standard Load (SL) tire:...
Page 376 374 SERVICING AND MAINTENANCE Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire; however, the date code may only be on one side. Tires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire.
Page 377 SERVICING AND MAINTENANCE 375 Tire Terminology And Definitions Term Definition B-Pillar The vehicle B-Pillar is the structural member of the body located be- hind the front door. Cold Tire Inflation Pressure Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after sitting for a minimum of three hours.
Page 378 376 SERVICING AND MAINTENANCE Tire Loading And Tire Pressure NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or the rear edge of the driver’s side door. Check the inflation pressure of each tire, including the spare tire (if equipped), at least monthly and inflate to the recommended pressure for your vehicle.
Page 379 SERVICING AND MAINTENANCE 377 Tire And Loading Information Placard Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tire size, and cold tire inflation pressures specified on the Tire and Loading Information placard in “Vehicle Loading”...
Page 380 378 SERVICING AND MAINTENANCE Steps For Determining Correct Load Limit— Metric Example For Load Limit (1) Locate the statement “The combined weight of For example, if “XXX” amount equals 635 kg and there will occupants and cargo should never exceed XXX kg or be five 68 kg passengers in your vehicle, the amount of XXX lbs.”...
Page 381 SERVICING AND MAINTENANCE 379 WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the rec- ommended load capacity for your vehicle. Never over- load them.
Page 382: Tires - General Information
380 SERVICING AND MAINTENANCE Tires — General Information WARNING! (Continued) Tire Pressure • Overinflated or underinflated tires can affect vehicle handling and can fail suddenly, resulting in loss of Proper tire inflation pressure is essential to the safe and vehicle control. satisfactory operation of your vehicle.
Page 383 SERVICING AND MAINTENANCE 381 Fuel Economy CAUTION! Underinflated tires will increase tire rolling resistance After inspecting or adjusting the tire pressure, always resulting in higher fuel consumption. reinstall the valve stem cap. This will prevent moisture Tread Wear and dirt from entering the valve stem, which could damage the valve stem.
Page 384 382 SERVICING AND MAINTENANCE pressure should be increased by 3 psi (21 kPa), which Radial Ply Tires equals 1 psi (7 kPa) for every 12°F (7°C) for this outside temperature condition. WARNING! Tire pressure may increase from 2 to 6 psi (13 to 40 kPa) Combining radial ply tires with other types of tires on during operation.
Page 385 SERVICING AND MAINTENANCE 383 Run Flat Tires — If Equipped Tire Spinning Run Flat tires allow you the capability to drive 50 miles When stuck in mud, sand, snow, or ice conditions, do not (80 km) at 50 mph (80 km/h) after a rapid loss of inflation spin your vehicle’s wheels above 30 mph (48 km/h) or for pressure.
Page 386 384 SERVICING AND MAINTENANCE Life Of Tire The service life of a tire is dependent upon varying factors including, but not limited to: • Driving style. • Tire pressure - Improper cold tire inflation pressures can cause uneven wear patterns to develop across the tire tread.
Page 387 SERVICING AND MAINTENANCE 385 Keep dismounted tires in a cool, dry place with as little It is recommended you contact an authorized tire dealer or exposure to light as possible. Protect tires from contact with original equipment dealer with any questions you may oil, grease, and gasoline.
Page 388: Tire Types
386 SERVICING AND MAINTENANCE Summer Or Three Season Tires — If Equipped WARNING! (Continued) Summer tires provide traction in both wet and dry condi- • Failure to equip your vehicle with tires having ad- tions, and are not intended to be driven in snow or on ice. equate speed capability can result in sudden tire If your vehicle is equipped with Summer tires, be aware failure and loss of vehicle control.
Page 389: Spare Tires - If Equipped
SERVICING AND MAINTENANCE 387 Spare Tires — If Equipped Snow Tires Some areas of the country require the use of snow tires NOTE: For vehicles equipped with Tire Service Kit instead during the Winter. Snow tires can be identified by a of a spare tire, please refer to “Tire Service Kit”...
Page 390 388 SERVICING AND MAINTENANCE Compact Spare Tire — If Equipped WARNING! The compact spare is for temporary emergency use only. Compact and collapsible spares are for temporary You can identify if your vehicle is equipped with a compact emergency use only. With these spares, do not drive spare by looking at the spare tire description on the Tire more than 50 mph (80 km/h).
Page 391 SERVICING AND MAINTENANCE 389 Do not install a wheel cover or attempt to mount a Limited Use Spare — If Equipped conventional tire on the collapsible spare wheel, since the The limited use spare tire is for temporary emergency use wheel is designed specifically for the collapsible spare tire.
Page 392: Wheel And Wheel Trim Care
390 SERVICING AND MAINTENANCE Wheel And Wheel Trim Care CAUTION! (Continued) All wheels and wheel trim, especially aluminum and Limited Warranty. Only car wash soap, Mopar Wheel chrome plated wheels, should be cleaned regularly using Cleaner or equivalent is recommended. mild (neutral Ph) soap and water to maintain their luster and to prevent corrosion.
Page 393: Tire Chains (Traction Devices)
SERVICING AND MAINTENANCE 391 Dark Vapor Chrome, Black Satin Chrome, or Low Gloss WARNING! Clear Coat Wheels Using tires of different size and type (M+S, Snow) CAUTION! between front and rear axles can cause unpredictable handling. You could lose control and have a collision. If your vehicle is equipped with these specialty wheels, DO NOT USE wheel cleaners, abrasives, or CAUTION!
Page 394: Tire Rotation Recommendations
392 SERVICING AND MAINTENANCE Refer to the “Maintenance Plan” in this section for the CAUTION! (Continued) proper maintenance intervals. The reasons for any rapid or • Observe the traction device manufacturer’s instruc- unusual wear should be corrected prior to rotation being tions on the method of installation, operating speed, performed.
Page 395: Department Of Transportation Uniform Tire Quality Grades
SERVICING AND MAINTENANCE 393 DEPARTMENT OF TRANSPORTATION UNIFORM The suggested Four Wheel Drive (4WD) Tire rotation TIRE QUALITY GRADES method is the “rearward cross” shown in the following diagram. The following tire grading categories were established by the National Highway Traffic Safety Administration. The specific grade rating assigned by the tire’s manu- facturer in each category is shown on the sidewall of the tires on your vehicle.
Page 396: Traction Grades
394 SERVICING AND MAINTENANCE Traction Grades corresponds to a level of performance, which all pas- senger vehicle tires must meet under the Federal Motor The Traction grades, from highest to lowest, are AA, A, Vehicle Safety Standard No. 109. Grades B and A B, and C.
Page 397: Bodywork
SERVICING AND MAINTENANCE 395 • If you do not disconnect the battery from the electrical NOTE: When the vehicle has not been started or driven for system, check the battery charge every 30 days. at least 30 days, an Extended Park Start Procedure is required to start the vehicle.
Page 398: Body And Underbody Maintenance
396 SERVICING AND MAINTENANCE cold weather and other extreme conditions will have an Plastic is not as scratch resistant as glass and therefore adverse effect on paint, metal trim, and underbody protec- different lens cleaning procedures must be followed. tion. To minimize the possibility of scratching the lenses and The following maintenance recommendations will enable reducing light output, avoid wiping with a dry cloth.
Page 399: Interiors
SERVICING AND MAINTENANCE 397 • If you carry special cargo such as chemicals, fertilizers, CAUTION! de-icer salt, etc., be sure that such materials are well • Do not use abrasive or strong cleaning materials such packaged and sealed. as steel wool or scouring powder that will scratch •...
Page 400: Plastic And Coated Parts
398 SERVICING AND MAINTENANCE Plastic And Coated Parts Seat Belt Maintenance Do not bleach, dye or clean the belts with chemical solvents Use Mopar Total Clean to clean vinyl upholstery. or abrasive cleaners. This will weaken the fabric. Sun damage can also weaken the fabric. CAUTION! If the belts need cleaning, use a mild soap solution or •...
Page 401: Leather Parts
SERVICING AND MAINTENANCE 399 Leather Parts CAUTION! Mopar Total Clean is specifically recommended for leather Do not use Alcohol and Alcohol-based and/or Ketone upholstery. based cleaning products to clean leather upholstery, as Your leather upholstery can be best preserved by regular damage to the upholstery may result.
Page 403 TECHNICAL SPECIFICATIONS CONTENTS ▫ Do Not Use E-85 In Non-Flex Fuel Vehicles ..406 IDENTIFICATION DATA....402 ▫ Vehicle Identification Number ... . .402 ▫...
Page 404: Identification Data
402 TECHNICAL SPECIFICATIONS IDENTIFICATION DATA Vehicle Identification Number The chassis number (VIN) is stamped on the plate illus- trated , located on the left front corner of the instrument panel cover, visible from the outside vehicle through the windshield. Vehicle Identification Number (VIN) The stamp includes: •...
Page 405: Brake System
TECHNICAL SPECIFICATIONS 403 BRAKE SYSTEM Torque Specifications Your vehicle is equipped with dual hydraulic brake sys- Lug Nut/Bolt Torque **Lug Nut/ Lug Nut/ tems. If either of the two hydraulic systems loses normal Bolt Size Bolt Socket capability, the remaining system will still function. How- Size ever, there will be some loss of overall braking effective- 89 Ft-Lbs (120 N·m)
Page 406: Fuel Requirements
404 TECHNICAL SPECIFICATIONS FUEL REQUIREMENTS Tighten the lug nuts/bolts in a star pattern until each nut/bolt has been tightened twice. 1.3L Turbo Engine This engine is designed to meet all emissions requirements, provide satisfactory fuel economy performance, when using high quality unleaded regular gasoline having an octane rating...
Page 407: Reformulated Gasoline
TECHNICAL SPECIFICATIONS 405 Reformulated Gasoline Indiscriminate use of fuel system cleaning agents should be avoided. Many of these materials intended for gum and Many areas of the country require the use of cleaner burning varnish removal may contain active solvents or similar gasoline referred to as “Reformulated Gasoline”.
Page 408: Do Not Use E-85 In Non-Flex Fuel Vehicles
406 TECHNICAL SPECIFICATIONS Do Not Use E-85 In Non-Flex Fuel Vehicles MMT In Gasoline Non-Flex Fuel Vehicles (FFV) are compatible with gasoline Methylcyclopentadienyl Manganese Tricarbonyl (MMT) is containing up to 15% ethanol (E-15). Use of gasoline with a manganese-containing metallic additive that is blended higher ethanol content may void the New Vehicle Limited into some gasoline to increase octane.
Page 409: Carbon Monoxide Warnings
TECHNICAL SPECIFICATIONS 407 Carbon Monoxide Warnings CAUTION! (Continued) • An out-of-tune engine or certain fuel or ignition WARNING! malfunctions can cause the catalytic converter to Carbon monoxide (CO) in exhaust gases is deadly. overheat. If you notice a pungent burning odor or Follow the precautions below to prevent carbon mon- some light smoke, your engine may be out of tune or oxide poisoning:...
Page 410: Fluid Capacities
408 TECHNICAL SPECIFICATIONS FLUID CAPACITIES Metric Fuel (Approximate) 1.3L Turbo Engine 12.7 Gallons 48 Liters Engine Oil With Filter 1.3L Turbo Engine (SAE 0W-30 SN PLUS Synthetic, API Certified) 4.5 Quarts 4.3 Liters Cooling System * 1.3L Turbo Engine (Mopar Antifreeze/Engine Coolant 10 Year/150,000 Mile Formula) 8.8 Quarts 8.3 Liters * Includes heater and coolant recovery bottle filled to MAX level.
Page 411: Fluids And Lubricants
TECHNICAL SPECIFICATIONS 409 FLUIDS AND LUBRICANTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of FCA Material Standard MS.90032. Engine Oil – 1.3L Turbo Engine We recommend you use SAE 0W-30 SN PLUS API Certified Synthetic Engine Oil, meeting the requirements of FCA material standard MS.13340.
Page 412: Chassis
410 TECHNICAL SPECIFICATIONS Chassis Component Fluid, Lubricant, or Genuine Part Automatic Transmission Use only Mopar ZF 8&9 Speed ATF Automatic Transmission Fluid, or equiva- lent. Failure to use the correct fluid may affect the function or performance of your transmission. Power Transfer Unit (PTU) We recommended you use Mopar Front Axle/PTU Synthetic Axle Lubricant SAE 75W-90 (API GL-5).
Page 413 MULTIMEDIA CONTENTS ▫ Introducing Uconnect ....434 UCONNECT SYSTEMS ....412 ▫...
Page 414: Uconnect Systems
412 MULTIMEDIA UCONNECT SYSTEMS 1. Press the “Uconnect ” button to open the App screen. For detailed information about your Uconnect system, refer to your Uconnect Owner’s Manual Supplement. 2. Press and hold, then drag the selected App to replace an NOTE: Uconnect screen images are for illustration purposes existing shortcut in the main menu bar.
Page 415 MULTIMEDIA 413 updates to improve the usability and performance of your WARNING! (Continued) systems or to reduce the potential risk of unauthorized and • As always, if you experience unusual vehicle behav- unlawful access to your vehicle systems. ior, take your vehicle to your nearest authorized The risk of unauthorized and unlawful access to your dealer immediately.
Page 416: Uconnect Settings
414 MULTIMEDIA UCONNECT SETTINGS When making a selection, press the button on the touch- screen to enter the desired mode. Once in the desired Customer Programmable Features — Uconnect 4/4 mode, press and release the preferred setting until a NAV With 7–inch Display Settings check-mark appears next to the setting, showing that Press the Settings button to display the menu setting setting has been selected.
Page 417 MULTIMEDIA 415 Setting Name Selectable Options Display Brightness With – Headlights OFF Language English Français Español NOTE: When the “Set Language” feature is selected, you may select one of multiple languages (English / Français / Espa- ñol) for all display nomenclature, including the trip functions and the navigation system (if equipped). Press the “Set Language”...
Page 418 416 MULTIMEDIA • Custom Units • Units When “Custom” is selected, you may select each unit of measure independently displayed in the instrument cluster When in this display, you may select to have the instru- display, and navigation system. ment cluster display, odometer, and navigation system changed between US and Metric units of measure.
Page 419 MULTIMEDIA 417 Clock & Date After pressing the “Clock & Date” button on the touch- screen, the following settings will be available: Setting Name Selectable Options Set Time Hours – Set Time Minutes – Time Format – Show Time In Status Bar —...
Page 420 418 MULTIMEDIA Safety & Driving Assistance After pressing the “Safety & Driving Assistance” button on the touchscreen, the following settings will be available: Setting Name Selectable Options ParkView Backup Camera Active Guide Lines NOTE: The “ParkView Backup Camera Active Guide Lines” feature overlays the Rear Backup Camera image with active, or dynamic, grid lines to help illustrate the width of the vehicle and its projected back up path, based on the steering wheel position when the option is checked.
Page 421 MULTIMEDIA 419 Setting Name Selectable Options Full Brake Control Only Warning Warning + Active Braking System— If Equipped NOTE: Changing the Full Brake Control System status to “Off” prevents the system from warning you of a possible collision with the vehicle in front of you. The Full Brake Control system state is kept in memory from one ignition cycle to the next.
Page 422 420 MULTIMEDIA Setting Name Selectable Options Park Assist— If Equipped Sound Only Sound & Display NOTE: The “Park Assist” system setting scans for objects behind the vehicle when the transmission gear selector is in RE- VERSE and the vehicle speed is less than 7 mph (11 km/h), when enabled. It provides an alert (audible and/or vi- sual) to indicate the proximity to other objects.
Page 423 MULTIMEDIA 421 Setting Name Selectable Options Blind Spot Alert — If Lights Lights & Chime Equipped NOTE: When the “Blind Spot Alert” feature is selected, the Blind Spot Monitor (BSM) system is activated and shows a visual alert in the outside mirrors, or it shows a visual alert in the outside mirrors and sounds an audible alert when the turn signal is on.
Page 424 422 MULTIMEDIA Brakes After pressing the “Brakes” button on the touchscreen, the following settings will be available: Setting Name Selectable Options Brake Service NOTE: Selecting the “Brake Service” feature will display a pop-up asking whether or not you would like to retract the park brakes to the brake system service.
Page 425: Door Locks
MULTIMEDIA 423 Setting Name Selectable Options Headlight Off Delay 0 sec 30 sec 60 sec 90 sec Greeting Lights — If Equipped Auto High Beams — If Equipped Daytime Running Lights Cornering Lights NOTE: When this feature is selected, if the steering wheel rotation angle is large or the turn signal indicators are on, a light (incorporated in the fog light) turns on, on the relevant side to improve visibility at night.
Page 426 424 MULTIMEDIA Setting Name Selectable Options Auto Unlock On Exit NOTE: When the “Auto Unlock On Exit” feature is selected, all doors will unlock when the vehicle is stopped and the trans- mission is in the PARK or NEUTRAL position and the driver’s door is opened. Flash Lights With Lock Horn With Lock —...
Page 427: Door Handles
MULTIMEDIA 425 Setting Name Selectable Options Remote Door Unlock — If Driver Equipped NOTE: • When “Driver” is selected, only the driver’s door will unlock on the first push of the key fob unlock button, you must push the key fob unlock button twice to unlock the passenger’s door. When “All” is selected, all of the doors will unlock on the first press of the key fob unlock button.
Page 428 426 MULTIMEDIA Engine Off Options After pressing the “Engine Off Options” button on the touchscreen, the following settings will be available: Setting Name Selectable Options Headlight Off Delay — If Equipped Radio Off Delay — If Equipped 0 MIN 20 MIN Audio After pressing the “Audio”...
Page 429 MULTIMEDIA 427 Setting Name Selectable Options Loudness — If Equipped NOTE: This feature improves sound quality at lower volumes when enabled. AUX Volume Offset – NOTE: The “AUX Volume Offset” feature provides the ability to tune the audio level for portable devices connected through the AUX input.
Page 430 428 MULTIMEDIA Phone/Bluetooth WARNING! Any voice commanded system should be used only in safe driving conditions following all applicable laws. Your attention should be focused on safely operating the vehicle. Failure to do so may result in a collision causing serious injury or death. After pressing the “Phone”...
Page 431 MULTIMEDIA 429 SiriusXM Setup — If Equipped After pressing the “SiriusXM Setup” button on the touch- screen, the following settings will be available: Setting Name Selectable Options Tune Start NOTE: The “Tune Start” feature begins playing the current song from the beginning when you tune to a music chan- nel using one of the twelve presets, so you can enjoy the complete song.
Page 432 430 MULTIMEDIA Restore Settings To Default After pressing the “Restore Settings” button on the touch- screen, the following settings will be available: Setting Name Selectable Options Restore Settings NOTE: When this feature is selected, it will reset Display, Clock, Audio, and Radio Settings to their default. Clear Personal Data After pressing the “Clear Personal Data Settings”...
Page 433: Steering Wheel Audio Controls
MULTIMEDIA 431 STEERING WHEEL AUDIO CONTROLS Pushing the center button will make the radio switch between the various modes available (AM/FM/SAT/ The remote sound system controls are located at the rear of AUX, etc.). the steering wheel. Reach behind the wheel to access the switches.
Page 434: Usb/Media Player Control - If Equipped
432 MULTIMEDIA If you push the switch up or down twice, it plays the This feature allows an external device to be plugged into second track; three times, it will play the third, etc. the USB port or AUX Jack. Refer to the Uconnect Owner’s Manual Supplement for USB/MEDIA PLAYER CONTROL —...
Page 435: Radio Operation And Mobile Devices
MULTIMEDIA 433 Center Console USB Port satisfactorily “clear” by the repositioning of the antenna, it is recommended that the radio volume be turned down or Located in the center console is a third USB port. off during mobile device operation when not using Uconnect (if equipped).
Page 436: Uconnect Voice Recognition Quick Tips
434 MULTIMEDIA environments, such as aboard airplanes. If you are unsure not installed and used in accordance with the instruc- of restrictions, you are encouraged to ask for authorization tions, may cause harmful interference to radio commu- before turning on the wireless radio. nications.
Page 437: Get Started
MULTIMEDIA 435 Get Started All you need to control your Uconnect system with your voice are the buttons on your steering wheel. 1. Visit UconnectPhone.com to check mobile device and feature compatibility and to find phone pairing in- structions. 2. Reduce background noise. Wind and passenger conver- sations are examples of noise that may impact recogni- tion.
Page 438: Basic Voice Commands
436 MULTIMEDIA Basic Voice Commands Radio The basic Voice Commands below can be given at any Use your voice to quickly get to the AM, FM or SiriusXM point while using your Uconnect system. Satellite Radio stations you would like to hear. (Subscrip- tion or included SiriusXM Satellite Radio trial required.) Push the VR button .
Page 439: Media
MULTIMEDIA 437 Media Uconnect offers connections via USB, Bluetooth and auxil- iary ports (if equipped). Voice operation is only available for connected USB and AUX devices. Push the VR button . After the beep, say one of the following commands and follow the prompts to switch your media source or choose an artist.
Page 440: Phone
438 MULTIMEDIA Phone Making and answering hands-free phone calls is easy with Uconnect. When the Phone button is illuminated on your touchscreen, your system is ready. Check UconnectPhone.com for mobile phone compatibility and pairing instructions. Push the VR Button . After the beep, say one of the following commands: •...
Page 441: Navigation (4 Nav) - If Equipped
MULTIMEDIA 439 Navigation (4 NAV) — If Equipped TIP: To start a POI search, push the VR button . After the beep, say: “ Find nearest coffee shop.” The Uconnect navigation feature helps you save time and Siri Eyes Free — If Equipped become more productive when you know exactly how to get to where you want to go.
Page 442: Using Do Not Disturb
440 MULTIMEDIA Using Do Not Disturb Press and hold the button on the steering wheel to activate Siri. As soon as your hear a double beep, you With Do Not Disturb, you can disable notifications from can start interacting with Siri to listen to music, get incoming calls and texts, allowing you to keep your eyes directions, read text messages and more.
Page 443: Android Auto - If Equipped
MULTIMEDIA 441 Android Auto — If Equipped • Text Messages • Additional Apps NOTE: Feature availability depends on your carrier and mobile phone manufacturer. Some Android Auto features may or may not be available in every region and/or language. Android Auto allows you to use your voice to interact with Android’s best-in-class speech technology through your vehicle’s voice recognition system, and use your smart- phone’s data plan to project your Android powered smart-...
Page 444: Apple Carplay - If Equipped
442 MULTIMEDIA Apple CarPlay — If Equipped NOTE: Feature availability depends on your carrier and mobile phone manufacturer. Some Apple CarPlay and Android Auto features may or may not be available in every region and/or language. Apple CarPlay allows you to use your voice to interact with Siri through your vehicle’s voice recognition system, and use your smartphone’s data plan to project your iPhone and a number of its apps onto your Uconnect...
Page 445: General Information
MULTIMEDIA 443 General Information Uconnect System Support: • U.S. residents visit DriveUconnect.com or call: 1-877- The following regulatory statement applies to all Radio 855-8400 (24 hours a day 7 days a week) Frequency (RF) devices equipped in this vehicle: • Canadian residents visit DriveUconnect.ca or call: 1-800- This device complies with Part 15 of the FCC Rules and 465-2001 (English) or 1-800-387-9983 (French) with Industry Canada license-exempt RSS standard(s).
Page 446 444 MULTIMEDIA NOTE: If you experience difficulty in playing a particular disc, it may be damaged (e.g., scratched, reflective coating removed, a hair, moisture or dew on the disc), oversized, or have protection encoding. Try a known good disc before considering disc player service.
Page 447 CONSUMER ASSISTANCE CONTENTS ▫ Customer Assistance For The Hearing Or Speech SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE ......446 Impaired (TDD/TTY) .
Page 448: Suggestions For Obtaining Service For Your Vehicle
446 CONSUMER ASSISTANCE SUGGESTIONS FOR OBTAINING SERVICE FOR IF YOU NEED ASSISTANCE YOUR VEHICLE The manufacturer and its authorized dealer are vitally Prepare For The Appointment interested in your satisfaction. We want you to be happy with our products and services. If you are having warranty work done, be sure to have the right papers with you.
Page 449: Fca Us Llc Customer Center
CONSUMER ASSISTANCE In Mexico Contact Any communication to the manufacturer’s customer center should include the following information: Av. Prolongacion Paseo de la Reforma, 1240 • Owner’s name and address Sante Fe C.P. 05109 • Owner’s telephone number (home and office) Mexico, D.
Page 450: Customer Assistance For The Hearing Or Speech Impaired (Tdd/Tty)
448 CONSUMER ASSISTANCE Customer Assistance For The Hearing Or Speech questions about the service contract, call the manufactur- Impaired (TDD/TTY) er’s Service Contract National Customer Hotline at 1-800- 521-9922 (Canadian residents, call (800) 465-2001 English / To assist customers who have hearing difficulties, the (800) 387-9983 French).
Page 451: Warranty Information
CONSUMER ASSISTANCE REPORTING SAFETY DEFECTS WARNING! In The 50 United States And Washington, D.C. Engine exhaust (internal combustion engines only), If you believe that your vehicle has a defect that could some of its constituents, and certain vehicle compo- cause a crash or cause injury or death, you should nents contain, or emit, chemicals known to the State of immediately inform the National Highway Traffic California to cause cancer and birth defects, or other...
Page 452: In Canada
450 CONSUMER ASSISTANCE In Canada Diagnostic Procedure Manuals If you believe that your vehicle has a safety defect, Diagnostic Procedure Manuals are filled with diagrams, you should contact the Customer Service Department charts and detailed illustrations. These practical manuals immediately. Canadian customers who wish to report a make it easy for students and technicians to find and fix safety defect to the Canadian government should con- problems on computer-controlled vehicle systems and fea-...
Page 453 INDEX...
Page 454 452 INDEX About Your Brakes ......403 Air Conditioning Filter ....85, 359 Adaptive Cruise Control (ACC) (Cruise Control) .
Page 455 INDEX 453 Fluid Change ......370 Camera, Rear ......273 Fluid Level Check .
Page 456 454 INDEX Seating Positions ......192 Radiator Cap ......365 Cigar Lighter .
Page 457 INDEX 455 Door Locks Air Cleaner ......356 Remote Keyless Entry ..... .30 Break-In Recommendations .
Page 458 456 INDEX Air Conditioning ..... .85, 359 Gauge ....... .125 Engine Oil .
Page 459 INDEX 457 Cleaning .......396 Interior Appearance Care .....397 Delay .
Page 460 458 INDEX Unlock From The Passenger’s Side ... . .32 Fog ........58 Keyless Entry .
Page 461 INDEX 459 Luggage Carrier ......105 Octane Rating, Gasoline (Fuel) ....404, 409 Lug Nuts/Bolts .
Page 462 460 INDEX Owner’s Manual (Operator Manual)....5 Rear Seats, Folding ......40 Rear Window Defroster .
Page 463 INDEX 461 Roll Over Warning ......5 Rear Seat ......164 Roof Type Carrier .
Page 464 462 INDEX Snow Chains (Tire Chains) ....391 Storage, Vehicle......84 Snow Tires .
Page 465 INDEX 463 Jacking ....... .370 Towing Behind A Motorhome ....288 Life Of Tires .
Page 466 464 INDEX Passive Entry Programming ....423 Wind Buffeting ......88, 90 Uconnect Voice Command .
Page 467 INSTALLATION OF RADIO TRANSMITTING Mobile radio equipment with output power greater than EQUIPMENT normal may require special precautions. Special design considerations are incorporated into this All installations should be checked for possible interfer- vehicle’s electronic system to provide immunity to radio ence between the communications equipment and the frequency signals.

Fiat 500X 2019 Owner's Manual

Introduction

Graphical

Getting to Know Your Vehicle

Getting to Know Your Instrument Panel

Safety

Starting and Operating

In Case of Emergency

Servicing and Maintenance

Quick Links

Chapters

Related Manuals for Fiat 500X 2019

Summary of Contents for Fiat 500X 2019