Select An Application - Crestron TSW-70 Series Product Manual

Create an Admin Account
The first time the web configuration interface is accessed, a dialog box is displayed asking the
user to create an admin account. A similar message is displayed when connecting to the device in
Crestron Toolbox software if an admin account has not already been created.
To create an admin account:
1. Enter a username and password for the admin account in the appropriate text fields.
CAUTION: Do not lose the username and password for the admin account, as the device
must be reset to factory settings to regain access.
2. Click OK. A dialog box is displayed stating that enabling authentication will restart the
web session.
3. Click Yes to confirm and restart. The username and password created in step 1 must be
entered to regain access to the web configuration interface.
Set the Time Zone
The time zone must be set on the touch screen if it will not be paired with a control system
IP table.
To set the time zone:
1. Access the web configuration interface using either the touch screen IP address or the XiO
Cloud service.
2. Select the Settings tab.
3. Navigate to System Setup > Time/Date.
4. Select the time zone where the touch screen will be used from the Time Zone drop-down
menu.
5. Click Save Changes on the top right of the screen.

Select an Application

The touch screen ships with various built-in applications. An application may be selected from
the default project that ships with the touch screen.
NOTE: Applications can be selected and configured from the device setup screens or from the
web configuration interface at any time. For more information, refer to
(on page 213).
To select a touch screen application:
1. Tap Touch Here to Enable a Specific Application on the device splash screen. Refer to the
first image in TSW-570, TSW-770, and TSW-1070 Installation (on
Product Manual — Doc. 8550E
Application Selection
page 96).
TSW-70 Series • 105