Crestron TSW-70 Series Product Manual page 205

Control System
Click Control System to configure a connection to a Crestron control system.
NOTE: The Control System accordion is shown in user project mode only.
Settings Tab - Control System
If the control system has authentication enabled, its username and password must be entered in
the Security tab. For more information, refer to
IP Table: Set an IP table connection between the touch screen and control system:
l
IP ID: Enter an IP ID for connecting the touch screen to the control system.
o
IP Address/Hostname: Enter the control system IP address or hostname.
o
Room ID: Enter a room ID to associate with the touch screen (for connections with
o
the Crestron Virtual Control server-based control system)
NOTE: For more information on connecting the touch screen to Crestron Virtual Control,
refer to the help file in the Crestron Virtual Control web configuration interface. To
access the help file, click the question mark button
Product Manual — Doc. 8550E
Security (on the next
on the top left of the page.
page).
TSW-70 Series • 199