Select A Wi-Fi Access Point - Crestron TSS-770 Product Manual

Use the keypad to make a new entry.
l
Tap the clear button
l
Tap the delete button
l
Tap Save to save a new entry or tap < CANCEL to discard any changes. The display
l
returns to the Static IP Ethernet Setup screen.
After new settings have been saved, tap APPLY CHANGES on the WiFi Static IP Setup screen to
apply the new settings and stay in setup mode. Tap REBOOT to exit setup mode and reboot the
touch screen.
Tap < BACK to return to the Wi-Fi Setup screen.
Tap < BACK on the Wi-Fi Setup screen to return to the Setup screen.

Select a Wi-Fi Access Point

On the Wi-Fi Setup screen, tap Select Wi-Fi Access Point. The Connect to a Wi-Fi Access Point
(1-2-3) screen is displayed.
Connect to a Wi-Fi Access Point (1-2-3) Screen
Use the Connect to a Wi-Fi Access Point (1-2-3) screen to connect the touch screen to an existing
WAP that is in range or to configure a new WAP. Any WAPs that are in range and discoverable
are displayed under Step 1 - Select a WAP upon successful discovery.
Product Manual — Doc. 8745C
in the text field to clear any previous entry.
to delete the last digit.
TSS-770 and TSS-1070 • 9