Crestron TSW-70 Series Product Manual page 199

Display Edge: Select a radio button (Top, Bottom, Left, or Right) to select the position on
l
the touch screen where the virtual toolbar is displayed.
Auto Hide Timeout: Select a duration (in seconds) that must elapse before the virtual
l
toolbar is hidden automatically.
Click the + (plus) icon next to PinPoint Beacon to display the following Bluetooth beacon
settings.
Settings Tab - System Setup (PinPoint Beacon)
BT Enabled: Turn on the toggle to use the Bluetooth beacon.
l
BT Mode: Use the drop-down menu to select the mode (Advertise or Config) of the
l
Bluetooth beacon.
Select Advertise to make the Bluetooth beacon available to Crestron devices that
o
support this functionality.
Select Config to put the Bluetooth beacon into configuration mode.
o
Services
Click Services to configure Crestron Fusion® software settings.
Settings Tab - Services
NOTE: If connecting to a Crestron Fusion software on-premises server, connections are made
using either traditional (outbound) or inbound communications. For more information, refer to
the Crestron Fusion 10 On-Premises Software Getting Started
Crestron Fusion Cloud: Turn on the toggle to allow a connection to a Crestron Fusion
l
Cloud server. This connection is only applicable when the scheduling mode is set to
Crestron Default or User Project.
Crestron Fusion Cloud URL: Enter the URL used to connect the touch screen to the desired
l
Crestron Fusion Cloud server.
Product Manual — Doc. 8550E
Guide.
TSW-70 Series • 193