Operation; Connections And Control Devices - ESAB ESABMig 400t Instruction Manual

GB
6

OPERATION

General safety regulations for the handling of the equipment can be found on
page 16. Read through before you start using the equipment!
WARNING - - TIPPING RISK!
Fasten the equipment -- particularly if the ground is uneven or sloping.
6.1

Connections and control devices

1 Connection for control cable to the wire
feed unit
2 MCB
3 Display (digital meters) is an accessory
see on page 44.
4 Orange indicating lamp, overheating and
loss of coolant*
White indicating lamp, power supply ON
5
6 Main supply switch
7 Main supply switch for cooling unit ELP**
NOTE! Cooling water connections only available on certain models.
* Indicating loss of coolant, only when water flow guard is used, see point 6.2.3
** ELP = ESAB Logic Pump, see point 6.2.2.
ba36d1ea
8 Connection for return cable (--),
low inductance
9 Connection for return cable (--),
medium inductance
10 Connection for return cable (--),
high inductance
11 Connection RED for cooling water from
the wire feed unit
Connection BLUE for cooling water to the
12
wire feed unit
13 Connection for weldng current cable (+)
- - 23 - -