Advertisement
Locate the installation site
Slide the release lever to detach
the sensor unit from the base.
Fix the base with the screws
included.
Arrange power supply by wire or battery.
* Factory set: Battery case wire is already connected to the unit. (Batteries are not
included.)
(1) Pull the battery case out from main unit. Keep the wire connected.
(2) Insert the battery into battery case with the correct polarity and confirm the buzzer
sound.
(3) Put the battery case
into the main unit.
(1) Pull the battery case out from main
unit and disconnect it.
}
(2) Connect the wire to the power
terminal.
Advertisement
