Advertisement
If this is ignored, people could face the possibility of death or serious injury.
If this is ignored, people may suffer injury or personal property may suffer damages.
This icon indicates actions to be avoided.
This icon indicates instructions that should be strictly followed.
Do not modify the unit, it may cause fire or
electric shock.
Stop using the unit in case of strange smoke,
smell, or noise generated from the unit.
In case the water leaks into the unit, stop using
the unit and power it off, contact the dealer.
Do not install the unit in a location that cannot
support its weight.
Use the designated power voltage only.
Do not mix old and new batteries.
Avoid subjecting the unit to impact.
This model is designed for indoor use only.
Do not install outdoor.
Use the designated battery only.
Battery life may shorten depending on
circumstances.
Do not install the unit in a humid place.
Do not touch the unit with wet hand.
Do not recharge the included battery.
When using batteries, ensure to keep the correct
polarity.
Do not heat, remodel the battery, do not put it into
water, fire.
Batteries are a choking hazard. Please keep away
from children.
Do not short-circuit the battery with the metal
objects which may cause fire.
Do not install the unit in the following locations.
Construction site where welding
is done. The arc lamp of welding
includes a very strong ultraviolet
rays which reach flame sensors
even indirectly by the reflection.
Near the railway
(Spark by pantograph)
In front of the object that
intercepts light. (including
glass and transparent
resin)
In a site subject to direct or reflecting sunlight and
rain. (This sensor is for indoor use only)
Near any device which generates a strong magnetic field.
Near high voltage
power line
In a site where fire is
usually used such as a
kitchen.
Advertisement
