Configuration Via Web Browser - Grandstream Networks HT813 Administration Manual

Fxs/fxo port analog telephone adaptor
Hide thumbs Also See for HT813:
Table of Contents

Advertisement

https://arttel.ru/
47
86
99
Five success tips when using the voice prompt
"*" shifts down to the next menu option and "#" returns to the main menu
"9" functions as the ENTER key in many cases to confirm or toggle an option.
All entered digit sequences have known lengths - 2 digits for menu option and 12 digits for IP
address. For IP address, add 0 before the digits if the digits are less than 3 (i.e. - 192.168.0.26
should be key in like 192168000026. No decimal is needed).
Key entry cannot be deleted but the phone may prompt error once it is detected.
Note: Please make sure to reboot the device after changing network settings (IP Address, Gateway,
Subnet...) to apply the new configuration.

Configuration via Web Browser

The HT813 embedded Web server responds to HTTP/HTTPS GET/POST requests. Embedded HTML
pages allow a user to configure the HT813 through a web browser such as Google Chrome, Mozilla Firefox
and Microsoft's IE.
Microsoft Internet Explorer: version 10 or higher.
Google Chrome: version 58.0.3 or higher.
Mozilla Firefox: version 53.0.2 or higher.
Safari: version 5.1.4 or higher.
Opera: version 44.0.2 or higher.
https://arttel.ru/shop/voip-shlyuzy/grandstream-ht-813
"Direct IP Calling"
Voice Mail
"RESET"
"Invalid Entry"
"Device not registered"
HT813 Administration Guide
Enter the target IP address to make a direct IP call, after
dial tone. (See "Make a Direct IP Call".)
Access to your voice mails messages.
Press "9" to reboot the device
Enter MAC address to restore factory default setting
(See RESTORE FACTORY DEFAULT SETTINGS
section)
Automatically returns to main menu
This prompt will be played immediately after off hook If
the device is not registered and the option "Outgoing
Call without Registration" is in NO
Version 1.0.1.2
P a g e
|
19

Advertisement

Table of Contents
loading

Table of Contents