Ht813 Leds Pattern; Figure 3: Connecting The Ht813 - Grandstream Networks HT813 Administration Manual

Fxs/fxo port analog telephone adaptor

Hide thumbs Also See for HT813:

Table of Contents

https://arttel.ru/

Insert a standard RJ11 telephone cable into FXS port and connect the other end of the

telephone cable to a standard touch-tone analog telephone.

Connect a computer or switch to the LAN port of the HT813 using an Ethernet Cable.

Insert the power adapter into the HT813 and connect it to a wall outlet and make sure to respect

the technical specifications of the power adapter used.

Power, LAN and FXS LED will be solidly lit when the HT813 is ready for use.

Note: Please make sure to enable NAT Router under Web GUI  Basic Settings  Device Mode.

HT813 LEDs Pattern

There are four (4) LED types that help you manage the status of your HT813.

https://arttel.ru/shop/voip-shlyuzy/grandstream-ht-813

Internet ADSL/Cable

Modem Ethernet

FXO

PSTN

Cloud

HT813 Administration Guide

Version 1.0.1.2

Analog Phone

WAN

FXS

Cordless

LAN

Fax

P a g e

Table of Contents