Call Features; Table 11: Ht813 Call Features - Grandstream Networks HT813 Administration Manual

https://arttel.ru/

Call Features

The HT813 supports all the traditional and advanced telephony features.
Key
*02
*03
*16
*17
*30
*31
*47
*50
*51
*67
*82
*69
*70
*71
*72
*73
*74
*78
*79
*87
https://arttel.ru/shop/voip-shlyuzy/grandstream-ht-813
Forcing a Codec (per call) *027110 (PCMU), *027111 (PCMA), *02723 (G723), *02729
(G729), *027201 (iLBC).
Disable LEC (per call) Dial "*03" +" number".
No dial tone is played in the middle.
Enable SRTP
Disable SRTP
Block Caller ID (for all subsequent calls)
Send Caller ID (for all subsequent calls)
Direct IP Calling. Dial "*47" + "IP address". No dial tone is played in the middle.
Disable Call Waiting (for all subsequent calls)
Enable Call Waiting (for all subsequent calls)
Block Caller ID (per call). Dial "*67" +" number". No dial tone is played in the middle.
Send Caller ID (per call). Dial "*82" +" number". No dial tone is played in the middle.
Call Return Service: Dial *69 and the phone will dial the last incoming phone number
received.
Disable Call Waiting (per call). Dial "*70" +" number". No dial tone is played in the middle.
Enable Call Waiting (per call). Dial "*71" +" number". No dial tone is played in the middle
Unconditional Call Forward: Dial "*72" and then the forwarding number followed by "#". Wait
for dial tone and hang up. (dial tone indicates successful forward)
Cancel Unconditional Call Forward. To cancel "Unconditional Call Forward", dial "*73", wait
for dial tone, then hang up.
Enable Paging Call: Dial "*74" and then the destination phone number you want to page.
Enable Do Not Disturb (DND): When enabled all incoming calls are rejected.
Disable Do Not Disturb (DND): When disabled, incoming calls are accepted.
Blind Transfer
HT813 Administration Guide

Table 11: HT813 Call Features

Call features
Version 1.0.1.2
P a g e | 71