Basic Settings; Table 7: Basic Settings Page - Grandstream Networks HT813 Administration Manual

https://arttel.ru/
WAN IPv4 Address
WAN IPv6 Address
Product Model
Hardware Version
Software Version
Software Status
System Up Time
PPPoE Link Up
NAT
Port Status
Port Options
Provision
Core Dump
Basic Settings Page Definitions

Basic Settings

New End User
Password
Confirm End User
Password
https://arttel.ru/shop/voip-shlyuzy/grandstream-ht-813
Displays assigned IPv4 address.
Displays assigned IPv6 address.
Displays product model info. Default is HT813.
Displays the hardware revision information and the part number.

Program: Specifies Program version. This is the main firmware release number,
which is always used for identifying the software system of the HT813.

Bootloader: Specifies Boot version.

Core: Specifies Core version.

Base: Specifies Base version.

CPE: Specifies CPE version. CPE version is displayed only when HT813 is
connected to an ACS using TR-069 protocol.
Indicates the current software status of the HT (Running or Stopped).
Indicates actual system time and uptime since last reboot.
Indicates PPPoE connection status.
Indicates type of NAT when it is configured.
Displays relevant information regarding the FXS and FXO ports about their registration,
current status and their appropriate User ID.
Displays relevant information regarding the FXS and FXO ports about their DND and
call forward features.
Displays provisioning status.
Provides generated core dump file if unit malfunctions. Clean will be displayed if no
issues.

Table 7: Basic Settings Page

Configures user level password.
Case sensitive and max. Length of 25 characters.
Re-enter the end user password to confirm change user password on web GUI to avoid
typo or mistakes.
HT813 Administration Guide
Version 1.0.1.2
P a g e | 24