Changed Protocol Switch Assignments - GE IDP-1111 User Manual

4 Legend
User Manual

Changed protocol switch assignments

With the addition of new protocols, the assignments of the rotary protocol switch have changed.
Be aware that if you were using Pelco D 2400 baud protocol, which was originally assigned to switch 6, you
will need to change the DIP switch setting in the housing. It is now incorporated into the Pelco D autobaud
protocol and assigned to switch 9.
Here are the new protocol switch assignments.
Table 2. Protocol switch assignments
Switch Protocol
0 Digiplex (RS-422) @ 4800 baud
1 Impac (RS-485) @ 9600 baud
2 For future use
3 For future use
4 For future use
5 ASCII @ 9600 baud
6 For future use
7 Ultrak @ 9600 baud (even parity)
8 Pelco P @ 4800 baud
9 Pelco D autobaud @ 2400, 4800, and 9600
A Tyco/AD (RS-422) @ 4800 baud
B For future use
C For future use
D For future use
E For factory use
F For factory use