Confirming Settings; Setup Menu; Memory Page - GE IDP-1111 User Manual

22 Legend
User Manual

Confirming settings

When changing settings on any programming page, you need to confirm the new settings by selecting OK on
that page. When establishing live video settings (for example, ShadowTours), you need to save the live video
settings (by pressing the iris + or the set ( ) key on the keypad), then save the changes made on the
programming page (by selecting OK in the programming interface) when you return to programming mode
from live video mode.

Setup menu

This is the beginning of your system's setup. Start here to title your dome, turn on/off or change passcodes,
establish network connectivity, set the north point, and manage your dome's memory.
Figure 12. Setup menu

Memory page

Programming and addressing for the dome are stored to the housing. Having the memory stored in the housing
allows you to replace cameras or move them between sites without having to reprogram cameras for each new
site, because the camera will operate using the housing memory.
The Memory page allows you to manage your dome's memory during setup and operation. When you clear
part or all of your dome's memory, you are overwriting your custom programmed settings with the factory
default settings.