GE IDP-1111 User Manual page 41

Title POS. The mask title will appear on screen in a default position on the monitor screen (upper center),
but you can reposition it with the Title POS button. Be aware of where you already have other titles
(camera, presets, tours, macros, areas, and alarms) positioned.
To set the position of the mask title:
1. Select Title POS.
2. Use the joystick to move the title to the desired position.
3. Press the iris + or the set (
or esc key to cancel the new position.
Title font color. Individual mask titles will appear on screen in the color selected. Choices are as shown
onscreen. Default is White.
Title font size. Individual mask titles will appear on screen in the font size selected. Choices are as shown
onscreen. Default is 14 pt.
Title font weight. Individual mask titles will appear on screen in the font weight selected. Choices are as
shown onscreen. Default is Bold.
Mask color. You can customize the color of each mask. Individual masks will appear on screen in the
color selected. Choices are Gray (default) and Red.
Show. The Show button displays the mask that is currently selected. The screen will say "Privacy mask
preview" in the upper left corner. Press iris +, iris -, esc, or set (
Program. The Program button programs the mask. There are two screens for programming masks. The
first screen positions the camera view and the second screen sizes the mask.
To program masks:
1. Select Program on the programming interface.
The programming interface will be replaced by live video overlaid with a grid that asks
you to establish the center of the privacy mask area.
2. Use the joystick to pan, tilt, and zoom the camera to the desired view.
3. Press the iris + or the set (
press the iris - or esc key to cancel the center position of the mask.
Canceling the camera view returns you to the Privacy Masks page. Saving the camera
view advances you to the second mask-programming screen, which will set the mask size.
4. At the second screen (if you saved the camera view), use the joystick to adjust the height and
width of the mask. Remember to make the mask 50% larger than the area you want to conceal.
Move the joystick up to increase the height, down to decrease the height, left to decrease
the width, and right to increase the width.
5. Press the iris + or the set (
key to cancel the mask.
Canceling the mask returns you to the first mask-programming screen, where you
reposition the camera view. Saving the mask size saves the mask at the set size and returns
you to the Privacy Masks page.
Clear. The Clear button deletes the mask that is currently selected.
) key on the keypad to save the new position or press the iris -
) key on the keypad to save the center position of the mask or
) key to save the mask at the set size or press the iris - or esc
Advanced programming
) to return to the menus.
Chapter 5 33