GE IDP-1111 User Manual page 53

Program. The Program button programs the preset. There is one screen for programming presets.
To program a preset:
1. Select Program. The programming interface will be replaced by live video that asks you to set
the desired position for the preset.
2. At the live video screen, use the joystick to pan, tilt, and zoom the camera to the desired position.
3. Press the iris + or the set (
iris - or esc key to cancel the preset position. Both canceling and saving the preset position
returns you to the Edit page of the Presets page.
Clear. The Clear button deletes the preset that is currently selected.
Display page
To access the Display page of Presets, select Actions, Presets, and Display.
Figure 29. Display page
Note: Remember to select OK to save any changes you make on the page.
No. The No. drop-down box allows you to select the preset number that you want to program.
Title. The Title box allows you to give each preset a unique title. Default numerical titles are provided.
There is a 60-character limit for all titles, but be aware of how much video you want to cover with your
titles.
Title POS. The preset title will appear on screen in a default position on the monitor screen (bottom
center), but you can reposition it with the Title POS button. Be aware of where you already have other
titles (camera, privacy masks, tours, macros, areas, and alarms) positioned.
To set the position of the preset title:
1. Select Title POS.
) key on the keypad to save the preset position or press the
Chapter 5
Advanced programming
45