GE IDP-1111 User Manual page 77

To access the Command Map page, select Control and Command Map.
Figure 46. Command Map page
Note: Remember to select OK to save any changes you make on the page.
Summary. The Summary feature lists what actions are currently assigned to each command. It lists
presets and tours separately, according to whichever list (preset or tour) you currently have selected
under the Command feature.
Command. The Command feature changes the group of commands listed in the summary between presets
and tours.
Auxiliary input (for command). The Auxiliary input feature specifies the number of the command (for
example, Preset 2 or Preset 102) that is to be remapped.
Note: To see the title of the selected command, go to the corresponding summary or list under the
Assigned action. The Assigned action feature remaps the selected command (preset or tour) to the same
type of command or to another type of command (for example, from a preset to a tour or macro).
Auxiliary input (for assigned action). The Auxiliary input feature specifies the number of the command
that is assigned.
Note: To see the title of the selected command, go to the corresponding summary or list under the
Update. The Update feature remaps the selected command with the selected action.
Restored default. The Restore default feature unmaps all commands in the current list (preset or tour).
Any commands remapped in the other list (tour or preset) are not restored.
Chapter 5
Advanced programming
Actions
menu.
Actions
menu.
69