GE IDP-1111 User Manual page 40

32 Legend
User Manual
When creating your masks, it is a common practice to make them 50% larger than the areas you wish to cover
so that the masked areas remain concealed at all times. Also, be aware that masks cannot be created in the area
directly below the dome. See Figure 22.
Figure 22. Masks should be 50% larger than the areas to be covered and are not allowed directly below the dome
Mask 50% larger than area to be covered
To access the Privacy Masks page, select Camera and Privacy Masks.
Figure 23. Privacy masks page
Note: Remember to select OK to save any changes you make on the page.
Mask number. The Mask number drop-down box allows you to select the mask number that you want to
program.
Mask title. The Mask title box allows you to give each mask a unique title. Default numerical titles are
provided. There is a 60-character limit for all titles, but be aware of how much video you want to cover
with your titles.
Mask
Area to be masked
0°
(+90°)
Positive (+)
hemisphere
No masks allowed 20° either side of 90° (0°) tilt
180°
(-90°)
Negative (-)
hemisphere
90°
(0°)