Areas Page - GE IDP-1111 User Manual

54 Legend
User Manual
Block color. You can create a block (background) that offsets the ShadowTour title from the video behind
it. The block will appear on screen in the color selected. Choices are as shown onscreen. Default is
Black.
Block transparency. You can set the block (background) to be a solid color or a transparency. The block
will appear on screen in the transparency selected. Choices are as shown onscreen. Default is No color.

Areas page

Areas are used primarily to provide onscreen titles of camera views. They can also serve to conceal sensitive
areas like privacy masks do. When using areas to conceal sensitive areas, they replace the entire video image
with a blue screen, whereas privacy masks cover only a portion of the video displayed. As with privacy masks,
areas are triggered by the camera passing through a defined center point. You can create 120 areas.
When creating your areas, be aware that they are triggered by their center viewpoint. Therefore, it is a common
practice to make areas twice the size of the area that you wish to conceal so that the areas are properly triggered
when the camera enters the trigger zone.
Summary page
The summary page provides the number and title of all areas that are programmed for the dome.
To access the Summary page of Areas, select Actions, Areas, and Summary.
Figure 34. Summary page
No. The No. column of the summary page lists all 120 areas in numerical order, whether programmed or
not.
Title. The Title column of the summary page lists the titles of all 120 areas. The default titles are listed if
they have not been retitled.