Modena Piazza Series User Manual Book page 17

• Sliding the chimney to adjust the chimney height. When the height you
required is reached, then fix two pieces of 4x8 mm screws onto the hole fixing
with plate I as showed in below pictures
• Drill 2 x 8 mm holes to accommodate the plate II. Screw and tighten the plate
II into the wall with two screws provided.
• Assembly the chimney into the unit and fix it with two screws.
•
For optimal air extraction :
•
Keep exhaust duct short and straight.
•
Do not reduce the size or restrict the exhaust duct.
•
Minimize bends.
•
Make sure the helix of the flexible exhaust duct is tightly drawn rather than
slacking.
•
Determine height between cooker hob and base of hood.
•
Mark wall to suit all bracket locations. Drill holes of 50 mm depth at the selected
drilling position.
17