Table of Contents
Advertisement
60
Occupant safety
1
ISOFIX mounting bracket
2
i‑Size mounting bracket
Before every trip, make sure that the ISOFIX
child restraint system or the i‑Size child restraint
system is engaged correctly in both mounting
brackets in the vehicle.
* NOTE Be careful not to damage the seat
belt for the centre seat when fitting the
child restraint system
Make sure that the seat belt is not trap‐
#
ped.
Attach the ISOFIX or i‑Size child restraint sys‐
#
tem to both mounting brackets in the vehicle.
Securing Top Tether
& WARNING Risk of injury or death if the
rear seat backrests are not locked after
fitting Top Tether belts
If the rear seat backrests are not locked, they
could fold forwards in the event of an acci‐
dent, braking or sudden changes of direction.
As a result, child restraint systems can no
longer perform their intended protective
function. Rear seat backrests that are not
locked can also cause additional injuries, e.g.
in the event of an accident.
Always lock rear seat backrests after
#
fitting Top Tether belts.
Set the rear seat backrests to the
#
upright position.
Ensure that the rear seat backrest is engaged. To
do so, pull forcefully on the seat backrest.
If the child restraint system is equipped
with a Top Tether belt:
The risk of injury can be reduced by Top
Tether. The Top Tether belt facilitates an
additional connection between the child
restraint system attached with ISOFIX or
i‑Size and the vehicle.
Advertisement
Table of Contents
