Mercedes-Benz G-Class 2018 Owner's Manual page 198

Hide thumbs Also See for G-Class 2018:
Table of Contents

Advertisement

This gives you enough time to move your foot
from the brake pedal to the accelerator pedal
and depress it before the vehicle begins to roll
away.
& WARNING Risk of accident and injury
due to the vehicle rolling away
After a short time, Hill Start Assist no longer
holds the vehicle and it can roll away.
Therefore, swiftly move your foot from
#
the brake pedal to the accelerator
pedal. Never attempt to leave the vehi‐
cle if it is being held by Hill Start Assist.
HOLD function
HOLD function
The HOLD function holds the vehicle at a stand‐
still without requiring you to depress the brake
pedal, e.g. while waiting in traffic.
The HOLD function is only an aid. The responsi‐
bility for the vehicle safely standing still remains
with the driver.
System limitations
The HOLD function is only intended to provide
assistance when driving and is not a sufficient
means of safeguarding the vehicle against rolling
away when stationary.
The incline must not be greater than 30%.
R
Activating/deactivating the HOLD function
& WARNING Risk of an accident due to the
HOLD function being activated when you
leave the vehicle
If you leave the vehicle while only the HOLD
function is braking the vehicle, the vehicle
can roll away in the following situations:
If there is a malfunction in the system or
R
in the power supply.
If the HOLD function is deactivated by
R
depressing the accelerator pedal or brake
pedal, e.g. by a vehicle occupant.
Always deactivate the HOLD function
#
and secure the vehicle against rolling
away before leaving the vehicle.
Driving and parking 195
Requirements:
The vehicle is stationary.
R
The driver's door is closed or the seat belt on
R
the driver's side is fastened.
The engine is running or has been automati‐
R
cally switched off by the ECO start/stop
function.
The electric parking brake is released.
R
Active Distance Assist DISTRONIC is deacti‐
R
vated.
The transmission is in position h, k or i.
R
Activating the HOLD function
Depress the brake pedal and after a short
#
time quickly depress further until the ë
display appears in the multifunction display.
Release the brake pedal.
#
Deactivating the HOLD function
Depress the accelerator pedal to pull away.
#
or
Depress the brake pedal until the ë dis‐
#
play disappears from the multifunction dis‐
play.

Advertisement

Table of Contents
loading

Table of Contents