Table of Contents
Advertisement
394 Breakdown assistance
Spare wheel bracket on the rear-end door
Stainless-steel spare wheel bracket
Removing a stainless-steel spare wheel
bracket
Remove screwdriver
1
from the vehicle tool
#
kit (
page 418).
/
Open the lock on cover ring
#
driver 1.
Fold tab
2
down.
#
Pull cover ring
3
apart and remove it.
#
Remove cover panel 4.
#
Removing the spare wheel
Remove wheel nuts 5.
#
Remove the spare wheel.
#
3
with screw‐
Securing the wheel to the spare wheel
bracket
Use nuts
#
spare wheel bracket. Specified tightening
torque: 20 Nm
Position cover panel
#
that retainer
in recess 7.
Attach cover ring
#
lock.
%
Make sure that the lock does not cover the
reversing camera. If necessary, turn cover
ring
3
5
to secure the faulty wheel to the
4
again. Make sure
6
of the cover panel engages
3
again and close the
slightly.
Advertisement
Table of Contents
