Table of Contents
Advertisement
To fold in or out: briefly press button 2.
#
To set: press button
1
or
#
outside mirror to be adjusted.
Press button
4
to adjust the position of the
#
mirror glass.
%
If the battery has been disconnected or com‐
pletely discharged, you will have to reset the
outside mirrors. Only then will the automatic
mirror folding function work properly.
To adjust: briefly press button 2.
#
An outside mirror that has been pushed out of
position can be engaged in position again as fol‐
lows:
Press and hold button 2.
#
You will hear a click and the mirror will audi‐
bly engage in position. The outside mirror will
now be set to the correct position.
Automatic anti-dazzle mirrors function
& WARNING Risk of burns and poisoning
due to the anti-dazzle mirror electrolyte
Electrolyte may escape if the glass in an
3
to select the
automatic anti-dazzle mirror breaks.
The electrolyte is harmful and causes irrita‐
tion. It must not come into contact with your
skin, eyes, respiratory organs or clothing or
be swallowed.
If you come into contact with electro‐
#
lyte, observe the following:
Light and sight 129
Rinse the electrolyte from your skin
R
and seek medical attention immedi‐
ately.
If electrolyte comes into contact
R
with your eyes, rinse them thor‐
oughly with clean water and seek
medical attention immediately.
If the electrolyte is swallowed,
R
immediately rinse your mouth out
thoroughly. Do not induce vomiting.
Seek medical attention immediately.
Immediately change out of clothing
R
which has come into contact with
electrolyte.
If an allergic reaction occurs, seek
R
medical attention immediately.
The inside rearview mirror and the outside mir‐
ror on the driver's side automatically go into
anti-dazzle mode if light from a headlamp hits
the sensor on the inside rearview mirror.
Advertisement
Table of Contents
