Table of Contents
Advertisement
%
Further information on different engine oils
can be obtained at a qualified specialist
workshop.
Quality and capacity of engine oil
MB-Freigabe or MB-Approval
Petrol engines
MB-Freigabe or MB-
G 500
229.52, 229.61
MB-Freigabe or MB-Approval
Diesel engines
MB-Freigabe or MB-
G 350 d
229.52, 229.61
If the engine oils listed in the table are not avail‐
able, you may add a maximum of 1.0 litre of the
following engine oils once only:
MB-Freigabe or MB-Approval 229.51 or
R
ACEA C3
The following values refer to an oil change,
including the oil filter.
Replacement amount
Model
All models
Notes on brake fluid
Approval
Observe the notes on operating fluids
(
page 429).
/
& WARNING Risk of an accident due to
vapour pockets forming in the brake sys‐
tem
Approval
The brake fluid constantly absorbs moisture
from the air. This lowers the boiling point of
the brake fluid. If the boiling point is too low,
vapour pockets may form in the brake sys‐
tem when the brakes are applied hard.
This impairs the braking effect.
Have the brake fluid renewed at the
#
specified intervals.
Have the brake fluid regularly replaced at a
qualified specialist workshop.
Replacement
Only use brake fluid approved by Mercedes-Benz
amount
according to MB-Freigabe or MB-Approval 331.0.
9.5 litres
You can obtain further information on brake fluid
in the following places:
in the Mercedes-Benz Specifications for
R
Operating Fluids
at http://bevo.mercedes-benz.com
-
in the Mercedes-Benz BeVo App
-
at a qualified specialist workshop
R
Coolant
Notes on coolant
Observe the notes on operating fluids
(
page 429).
/
& WARNING Risk of fire‑ and injury from
antifreeze
If antifreeze comes into contact with hot
component parts in the engine compart‐
ment, it may ignite.
Technical data 435
Advertisement
Table of Contents
