Mercedes-Benz G-Class 2018 Owner's Manual page 38

also deploy in the event of an accident along
with other systems.
Only one person should use each seat
#
belt at any one time.
Left and right rear seat:
* NOTE Deploying the seat belt tensioner
when the rear seat is unoccupied
If the seat belt tongue is engaged in the seat
belt buckle of the unoccupied rear seat, the
sear belt tensioner may also deploy in addi‐
tion to other systems in the event of an acci‐
dent.
Only one person should use each seat
#
belt at any one time.
Seat belt adjustment function
®
Vehicles with PRE-SAFE : if the front seat belt
is not pulled tight across your body, the seat belt
adjustment may automatically apply a certain
tightening force. Do not hold the seat belt tightly
while it is adjusting.
You can activate and deactivate the seat belt
adjustment function using the multimedia sys‐
tem ( page 35).
/
Releasing a seat belt
Press the release button in the seat belt
#
buckle and guide the seat belt back with the
seat belt tongue.
Activating/deactivating seat belt adjustment
via the multimedia system
Multimedia system:
Vehicle î Vehicle settings
4 5
Belt adjustment
5
Activate O or deactivate ª the function.
#
Seat belt warning function for the driver and
front passenger
The ü seat belt warning lamp in the instru‐
ment display is a reminder that all vehicle occu‐
pants must wear their seat belts correctly.
In addition, a warning tone may sound.
Occupant safety
As soon as the driver and front passenger fasten
their seat belts, the seat belt warning goes out.
Function of the rear seat belt status display
The rear seat belt status display is only available
for certain countries.
The rear seat belt status display informs you
which rear seat belt is not fastened.
You can immediately dismiss the rear seat belt
status display using the back button on the left-
hand side of the steering wheel (
35
page 226).
/