Telephone; If You Have A Super Display Telephone - NEC DS1000 Manual

Features
22
If you have a 22-Button or 34-Button Display Telephone
To redial your last call (when Enhanced Last Number Redial is enabled):
If you select a line key before going to step 1, the system automatically outdials your
most recent call when you press LND.
1. Press LND . You see (for example):
The number to the right of the display shows the Last Number Redial record number
(1-5). To return your phone to idle, press LND again.
2. (Optional) Press Vol Up or Vol Down to display the number you want to recall.
3. Press SPK , DIAL or lift the handset to recall the displayed number.
The system tries to use the same trunk as that used for your initial call.
- If that trunk is busy, the system selects a trunk from the same group as your initial call.
- If all trunks are busy, you can dial 2 to leave a Trunk Queue or Trunk Camp On. The
number will automatically redial when the Trunk Queue or Trunk Camp On goes through.
To erase (clear) all the numbers from your Enhanced Last Number Redial buffer:
1. Press LND . You see (for example):
2. Press CLEAR . You see:
3. Press the YES soft key to erase all the numbers in the Last Number Redial buffer and return to
idle.
OR
Press the NO soft key to return to step 1 without erasing the buffer.

If you have a Super Display Telephone

To redial your last call (when Enhanced Last Number Redial is enabled):
If you select a line key before going to step 1, the system automatically outdials your
most recent call when you press LND.
1. Press LND . You see (for example):
To return your phone to idle, press LND again.
2. Press the key that corresponds to the number you want to recall.
DS1000/2000 Feature Handbook Supplement