Unpacking; Necessary Tools (Not Supplied); Replacing An Existing Telephone System - NEC SL1000 Getting Started Manual

SL1000 Getting Started Guide

Unpacking

Unpacking the 1632M-A KSU and check against the following list. Inspect physical damage.
Items
1632M-A KSU
AC Power Cord
Screw(M4.1x25)
Template for Wall Mounting
CD-ROM

Necessary Tools (Not Supplied)

Make sure the necessary tools are prepared.
Required Items
Telephone Cables
RJ11 Plugs
Fixing Tools for RJ11 Plug and cable
2-conductor connectors for outside(CO) line
4-conductor connectors for extension
Cross head screwdriver
4 Wall Fixing plugs suitable for the type of wall

Replacing an Existing Telephone System

If you are replacing your existing telephone system with the SL1000, we recommend that you check the
following.

Do not disconnect all of the lines or extensions from your existing telephone system. If for any reason you
have problems installing the SL1000 you will need your old system in working order to continue your
business.

If you plan to use existing telephone cabling within your building check :
The cable is twisted pair cable.
o
There are 4 wires (2 pairs) available to each SL1000 system phone location.
o
You will need an RJ11 socket for each SL1000 system phone and DSS console.
o

Move the exchange lines/ analog telephones one at time and test each one before moving over the next.
Q'ty
1
1
4
1
1
Recommended cable type:Twisted Pair
Conductor diameter: 0.4 to 0.6 mm
Maximum cable length (with 0.5mm diameter cable):
SL1000 system Telephone/DSS Console --- 300 meters
Analog Telephone --- 1125 meters
11
Remarks
IP4WW-CPU-A1, IP4WW-408M-A1 and Power
Supply is initially equipped into the 1632M-A
KSU.
IP4WW-1632M-A w/o C is not including the AC
Power cord.
These four screws are for Wall Mount.
This is the template for Wall Mount screwing.
User Manual data are inside.
Specification