Features - Banner A-GAGE EZ-ARRAY Instruction Manual

1 Features

WARNING:
• Do not use this device for personnel protection
• Using this device for personnel protection could result in serious injury or death.
• This device does not include the self-checking redundant circuitry necessary to allow its use in
personnel safety applications. A device failure or malfunction can cause either an energized (on)
or de-energized (off) output condition.
• A cost-effective, two-piece measuring light curtain designed for quick and simple
installations with the sophistication to handle the toughest sensing applications
• Excels at high-speed, precise process monitoring and inspection, profiling, and
web-guiding applications
• A comprehensive combination of scanning options:
◦ 16 measurement (scan analysis) modes
◦ Three scanning methods
◦ Selectable beam blanking
◦ Selectable continuous or gated scan initiation
◦ Selectable threshold setting for semi-transparent applications
◦ Two analog outputs, two discrete outputs
◦ Communication via IO-Link v1.1 interface
• Outstanding 4 meter range with 5 mm beam spacing
• Available in 12 lengths from 150 mm to 2400 mm
• Excellent 5 mm minimum object detection or 2.5 mm edge resolution, depending
on scanning method
• Receiver user interface for quick, intuitive setup of many common applications:
◦ Six-position DIP switch for setting scan mode, measurement mode, analog
slope, discrete output 2 option (complementary measurement or alarm
operation)
◦ Two push buttons for gain method selection and alignment/ blanking
◦ Seven Zone LEDs for instant alignment and beam blockage information
◦ Three-digit display for sensing information and diagnostics
• Advanced configuration via IO-Link v1.1 communication interface
• Remote teach wire option for alignment, gain settings, inverted display, and DIP
switch disable
www.bannerengineering.com - Tel: + 1 888 373 6767
® ™
A-GAGE EZ-ARRAY with IO-Link v1.1
3