Subscribe to Our Youtube Channel
Related Manuals for Charder HM101M
Summary of Contents for Charder HM101M
- Page 1 USER MANUAL HM101M Height Meter Please keep the instruction manual at hand all the time for future reference.
- Page 2 Charder Electronic Co., Ltd. (hereinafter Charder) Charder is not liable for any damage caused by a failure to adhere to requirements stated in this manual. Charder reserves the right to correct misprints in the manual without prior notice, and modify the exterior of the device for quality purposes without customer consent.
- Page 3 CONTENTS I. Safety Notes ................4 A. General Information ............4 II. Installation ................5 III. Using Device ............... 7 IV. Product Specifications ............8 V. Declaration of Conformity ............. 8...
- Page 4 I. Safety Notes A. General Information Thank you for choosing this Charder Medical device. It is designed to be easy and straightforward to operate, but if you encounter any problems not addressed in this manual, please contact your local Charder service partner.
- Page 5 II. Installation Place HM101M on stable surface, and unfold stoppers. Measurement range between 100-1000 mm. Push head stopper to measure height.
- Page 6 Wall-mounting 1. Mark and drill two holes in the wall according to the hole positions on the HM101M. Ensure that both holes are at the same level. 2. Press wall anchors into the holes. 3. Fasten HM101M to wall.
- Page 7 III. Using Device 1. Push buckle to release stopper 2. Gently press baby's knees down until feet are straightened. 3. Push stopper until it touches infant's feet 4. Read infant height measurement result...
- Page 8 93/42/EEC as amended by 2007/47/EC Medical Device Directive Please see separate document showing on sticker of device for above CE marking. Authorized EU Representative: Manufactured by: Charder Electronic Co., Ltd. No.103, Guozhong Rd., Dali Dist., Taichung City, 41262 Taiwan (R.O.C.) CD-IN-1371 15245G 04/2021...
Need help?
Do you have a question about the HM101M and is the answer not in the manual?
Questions and answers