Lan Rj45 Connector (Cn3); Usb3.0 Connector (Cn5) - Advantech TPC-2000 Series User Manual

A.3.4

LAN RJ45 connector (CN3)

Table A.5: LAN RJ45 connector (CN3)
Pin Signal
1 MDI0+
2 MDI0-
3 MDI1+
6 MDI1-
4 MDI2+
5 MDI2-
7 MDI3+
8 MDI3-
A.3.5

USB3.0 connector (CN5)

Table A.6: USB3.0 connector (CN5)
Pin Signal
1 VBUS
2 USB2_D-
3 USB2_D+
4 GND
5 USB3_RX-
6 USB3_RX+
7 GND
8 USB3_TX-
9 USB3_TX+
10 VBUS
11 USB2_D-
12 USB2_D+
13 GND
14 USB3_RX-
15 USB3_RX+
16 GND
TPC-2000 Series User Manual
Description
In BASE-T: Media-dependent interface[0]:
1000BASE-T: In MDI configuration, MDI[0]+/- corresponds to
BI_DA+/-. In MDI-X configuration MDI[0]+/- corresponds to
BI_DB+/-.
10BASE-T and 100BASE-TX: In MDI configuration, MDI[0]+/-
is used for the transmit pair. In MDIX configuration, MDI[0]+/-
is used for the receive pair.
In BASE-T: Media-dependent interface[1]:
1000BASE-T: In MDI configuration, MDI[1]+/- corresponds to
BI_DB+/-. In MDI-X configuration, MDI[1]+/- corresponds to
BI_DA+/-.
10BASE-T and 100BASE-TX: In MDI configuration, MDI[1]+/-
is used for the receive pair. In MDI-X configuration, MDI[1]+/-
is used for the transmit pair
In BASE-T: Media-dependent interface[3:2]:
1000BASE-T: In MDI and in MDI-X configuration, MDI[2]+/-
corresponds to BI_DC+/- and MDI[3]+/- corresponds to
BI_DD+/-.
100BASE-TX: Unused
10BASE-T: Unused
Description
5V power output
USB2.0 data negative
USB2.0 data positive
system ground
USB3.0 data receive negative
USB3.0 data receive positive
system ground
USB3.0 data transmit negative
USB3.0 data transmit positive
5V power output
USB2.0 data negative
USB2.0 data positive
system ground
USB3.0 data receive negative
USB3.0 data receive positive
system ground
42