Driver Installation; Chipset, Graphics, Me, And Lan Driver Installation; Watchdog Driver Installation - Advantech TPC-2000 Series User Manual

Industrial modular touch panel computer with intel atom/ celeron processor
Table of Contents

Advertisement

2.3

Driver Installation

2.3.1

Chipset, Graphics, ME, and LAN Driver Installation

Relevant drivers must be installed for full functionality. Install the chipset, graphics,
ME, and LAN drivers individually. The drivers can be downloaded from the TPC-5000
product page of the Advantech website.
(A touch driver is needed only for 12" touch panels.)
2.3.2

Watchdog Driver Installation

If the Advantech watchdog driver is not pre-installed on the TPC system, users will
need to install the driver.
Follow the steps outlined below to install the Advantech watchdog driver.
1.
Verify that the computer meets the hardware and software requirements to run
the Advantech watchdog driver.
2.
If you do not already have the installer for the Advantech watchdog driver,
download it from the Advantech website.
3.
From the Control Panel, remove any existing installation of the Advantech
watchdog driver from the computer.
4.
With administrator-level privileges, run the installer for the Advantech watchdog
driver.
Below is an example of the Advantech watchdog driver setup. To stop the setup pro-
cess at any time, click the "Cancel" button on the pop-up screen. The setup program
will stop the procedure automatically.
1.
Open the setup program.When the setup program is running, click the Next but-
ton on the Advantech Watchdog Driver Setup Wizard pop-up screen.
11
TPC-2000 Series User Manual

Advertisement

Table of Contents
loading

Table of Contents