Power Input Connector (Cn1); Lan Rj45 Connector (Cn9) - Advantech TPC-300 Series User Manual

A.3.6

Power Input Connector (CN1)

Table A.8: Power Input Connector (CN1)
Pin Signal
1 Power In V+
2 Power In V– (GND)
3 GND_EARTH
A.3.7

LAN RJ45 Connector (CN9)

Table A.9: LAN RJ45 Connector (CN9)
RJ45 Pin Signal
1 MDI0+
2 MDI0-
3 MDI1+
6 MDI1-
4 MDI2+
5 MDI2-
7 MDI3+
8 MDI3-
TPC-300 Series/TPC-B510 User Manual
Description
24V +-20% Power in
DC
Used to connect a screw hole to the chassis GND for
shorting.
Description
In BASE-T:
Media-dependent interface[0]:
1000BASE-T:
In MDI configuration, MDI[0]+/- corresponds to BI_DA+/- and in
MDI-X configuration MDI[0]+/- corresponds to BI_DB+/-.
10BASE-T and 100BASE-TX:
In MDI configuration, MDI[0]+/- is used for the transmit pair and in
MDIX configuration MDI[0]+/- is used for the receive pair.
In BASE-T:
Media-dependent interface[1]:
1000BASE-T:
In MDI configuration, MDI[1]+/- corresponds to BI_DB+ and in MDI-
X configuration MDI[1]+/- corresponds to BI_DA+/-.
10BASE-T and 100BASE-TX:
In MDI configuration, MDI[1]+/- is used for the receive pair and in
MDI-X configuration MDI[1]+/- is used for the transmit pair.
In BASE-T:
Media-dependent interface[3:2]:
1000BASE-T:
In MDI and in MDI-X configuration, MDI[2]+/- corresponds to
BI_DC+/- and MDI[3]+/- corresponds to BI_DD+/-.
100BASE-TX: Unused.
10BASE-T: Unused.
36