Roger Beep; Call Tone; Key Beep - Uniden UH506SX-2NB Owner's Manual

Operation

Call Tone

Your UH506SX-2NB radio is equipped with 5 selectable call tones that will be
transmitted when CALL/MON is pressed.
1. Press (menu) six times. CL setting flashes.
Press (ch)
2.
change the selection. The 5 call tones are CL 1 to CL 5.
A sample of the call tone is sounded when selected.
3. Press & hold (menu) to save and exit.
Current regulations require calling tones to be restricted to one
transmission per minute. If a second transmission is attempted
within one minute then an error tone will sound.
NOTE

Key Beep

Assures the user that the keypad has been properly pressed by emitting a
beep tone. This tone can be switched on or off.
Press (menu) nine times. bP setting flashes.
1.
2. Press (ch)
3. Press & hold (menu) to save and exit.

Roger Beep

Roger Beep is a BEEP that is sent to notify the end of transmission (both PTT
and VOX transmission.) Roger Beep can be heard through the speaker when
Key Beep is on. Roger Beep is transmitted even if Key Beep is turned off.
However, Roger Beep will not be heard from the speaker.
1. Press (menu) eight times. rb setting flashes.
2. Press (ch)
3. Press & hold (menu) to save and exit.
UNIDEN UH506SX-2NB
or (vol)
or or
or or (vol) or
or or (vol) or
to
to change the setting on or off.
to change the setting on or off.
11
UHF CB Radio