Transmitting A Call Tone; Channel Scan Feature - Uniden PMR845-2CK Owner's Manual

UT009ZH_PMR845-2CK_E_1207
USING THE RADIO

Transmitting a Call Tone

Your PMR845-2CK radio is equipped with 5 selectable call
tones that will be transmitted when the CALL key is pressed.
To select a call tone:
1) Enter the Menu. Advance through the
Menu until the CALL icon blinks on
the display. The current call tone
number (
2) Press the L or M key to increase or
decrease the number to the desired
call tone. Each tone will be heard through the speaker.
3) Exit the Menu.
To transmit the selected call tone, press
the CALL key. The selected tone will
automatically be transmitted for a fixed
length of time. Call Tone will be
cancelled when the PTT button is
pressed.

Channel Scan Feature

Your PMR845-2CK radio has a channel scan feature that
allows you to easily scan all 8 channels. When an active
channel is detected, the radio will pause on that channel until
the channel is clear. Then after a 2 second pause, the radio
will continue scanning. Pressing the PTT button while the scan
is paused on a channel will allow you to transmit on that
channel.
To turn the channel scan ON:
Press and hold the CH/SCAN key until
the SCAN icon is displayed. The channel
number on the display will change as the
radio rapidly cycles through the
channels.
Questions about the range of your product? Call our helpline on 0845 2265664 (local call rate)
12/7/05
) will also blink.
-
10
12:53 PM Page 10