Roger Beep; Ctcss (Continuous Tone Coded Squelch System) - Uniden X76 Owner's Manual

Operation

Roger Beep

1. Press [MENU]. Scroll to Roger Beep
and press [MENU]. The roger beep
setting flashes.
2. Press /
setting between ON or OFF.
3. Press the PTT button to save &
exit from the menu mode.
If a button is not pressed within 10 seconds the UHF CB
Radio will automatically exit the Menu Mode.
NOTE

CTCSS (Continuous Tone Coded Squelch System)

To limit what signals you hear, use CTCSS (or DCS) to control the
squelch by setting a code. If another radio sends a signal along with the
same code then your radio will enable the signal to be heard. Share the
code with common users to hear only their transmissions.
Press /
Press [DCS/CTCSS].
The CTCSS/DCS icon flashes, along
with the current code.
Press /
CTCSS code 01 - 50. Press [DCS/CTCSS]
once to store the new setting.
To turn off CTCSS (or DCS) select the
off (oF) code during setting selection.
UNIDEN X76
to change the
to select the desired channel to use CTCSS.
to select a desired
22
UHF CB Transceiver