Table of Contents
Advertisement
Operation
Release Steps
1.
From the stowed position (Fig. 16), disengage the transport lock (Fig. 16A) by pulling the transport
lock knob to the right.
2.
Firmly grasp and pull out the vertically stored SolidStep XF and rest it firmly on the ground.
3.
Adjust leg extensions as needed. See Leg Extension Adjustment section.
Rev: 04.27.21
Moving parts can pinch, crush or cut. Keep clear and use caution.
Fig. 16
B
Page 9
A
CCD-0004123
Advertisement
Table of Contents
Need help?
Do you have a question about the SolidStep XF and is the answer not in the manual?
Questions and answers