Page 2
System Information The Sliding Swivel Seat Base allows the user to slide the seat base out at a 45° angle, so that the seat can be swiveled 180°. There are five models of the seat base available for the vehicles listed below.
Page 3
Swivel the seat back to the forward-facing position. Pull up on the seat side lever (Fig. 1) and slide the seat back to the drive position until it clicks into place. Maintenance There are no servicable parts in the Sliding Swivel Seat Base. Page 3 Rev: 05.09.19...
Page 4
The contents of this manual are proprietary and copyright protected by Lippert Components, Inc. (“LCI”). LCI prohibits the copying or dissemination of portions of this manual unless prior written consent from an authorized LCI representative has been provided. Any unauthorized use shall void any applicable warranty. ...
Need help?
Do you have a question about the Sliding Swivel Seat Base and is the answer not in the manual?
Questions and answers