Operation; Release Steps - Lippert Components SolidStep 3.0 Premium Step Owner's Manual

The "CAUTION" symbol above is a sign that a safety risk is involved and may cause personal injury
and/or product or property damage if not safely adhered to and within the parameters set forth
Always wear eye protection when performing service, maintenance or installation procedures.
Other safety equipment to consider would be hearing protection, gloves and possibly a full face
No repairs should be attempted by anyone other than a qualified professional. The deployment
and retraction of the step assembly can cause injury if proper precautions are not taken. The step
assembly was designed for an operational weight rating of 400 lbs.

Operation

Release Steps

1. Disengage transport lock (Fig. 1).
2. Firmly grasp and pull out the vertically-stored SolidStep® and firmly rest it on the ground.
3. Adjust leg extensions as needed, see Adjust Leg Extension section.
Rev: 07.06.21
shield, depending on the nature of the task.
Moving parts can pinch, crush or cut. Keep clear and use caution.
in this manual.
Fig. 1
Transport Lock
Page 3
CCD-0004367