Precor 954i Owner's Manual
Hide thumbs
Also See for 954i:
- Owner's manual (100 pages) ,
- Product specification (1 page) ,
- Product owners manual (96 pages)
Related Manuals for Precor 954i
Summary of Contents for Precor 954i
- Page 1 Product Owner's Manual Commercial Products Treadmills: • 954i • 932i Ellipticals: • EFX534i • EFX532i Cycle: • 842i...
-
Page 3: Important Safety Instructions
Important Safety Instructions When using Precor equipment, always take basic precautions, • Never leave the equipment unattended when it is plugged in. including the following: Unplug the equipment from its power source when it is not in use, before cleaning it, and before providing authorized service. -
Page 4: Educating Users
Proper disposal of the battery is required by federal law. If you plan to dispose of your equipment, contact Precor Commercial Products Customer Support for information regarding battery removal. Refer to Obtaining Service. -
Page 5: Safety Code
Safety Code Product Recycling and Disposal The club owner or manager has the option to enable the safety This equipment must be recycled or discarded according to code. The code involves entering four number keys in sequence. If applicable local and national regulations. the correct keys are not pressed within two minutes, further user Product labels, in accordance with European Directive 2002/96/ access is denied. -
Page 6: Radio Frequency Interference (Rfi)
Interference, Information Technology Equipment. Per FCC rules, changes or modifications not WARNING expressly approved by Precor could void the • EN55024, Immunity of Information Technology Equipment. user’s authority to operate the equipment. This product also conforms to the requirements of the European... -
Page 7: Treadmill Grounding Instructions
No adapter should be used with this product. inserted into an outlet that is properly installed and grounded in accordance with all local codes and ordinances. Failure to properly ground the treadmill could void the Precor Limited Warranty. Improper connection of the equipment- DANGER grounding conductor can result in a risk of electric shock. -
Page 8: Obtaining Service
Precor web site at www.precor.com/corp/contact. Date purchased: _______________________ For future reference, write the model, serial number, and date of purchase for all your Precor equipment in the space provided. The Model #: _______ Base Serial #: _______________________ serial number is printed on a label located near the power cord connection (treadmills) or receptacle (self-powered equipment). -
Page 9: Table Of Contents
Table of Contents Important Safety Instructions ..........1 Treadmill: Selecting Safety Code Protection ......15 Educating Users .................. 2 Choosing a Language ..............16 Selecting a U.S. Standard or Metric Display ......16 Hazardous Materials and Proper Disposal ........2 Safety Code ..................3 Setting an Exercise Session Time Limit ........17 Setting a Pause Time Limit .............17 Safety Approval .................. -
Page 10: Treadmill Safety Features
Treadmill Safety Features Before allowing users on Precor equipment, review the Important Using the Safety Clip Safety Instructions found at the beginning of this manual. You should Instruct users how important it is to use the safety clip while exercising also teach your patrons how to safely use the equipment following the on the treadmill. -
Page 11: Turning The Treadmill On And Off
Turning the Treadmill On and Off To turn the treadmill On and Off, use the power switch located beneath the hood, near the power cord receptacle. Important: When it is not being used, turn the treadmill Off. Weight Limit You should not allow runners over 350 lb. (160 kg) or walkers heavier than 500 lb. -
Page 12: Self-Powered Features
Self-Powered Features On self-powered equipment, the battery initializes and displays the Informational Displays Precor banner when a user starts exercising. A minimum rate of Prior to Shutdown motion must be maintained for the banner to appear. Refer to Table 1. -
Page 13: Symptoms Of A Low Battery
When the pause time limit expires and the user has not resumed exercising, the display returns to the Precor banner. Refer to Setting a Pause Time Limit. To learn how to install the power adapter, refer to The Optional Power Adapter Kit. -
Page 14: The Optional Power Adapter Kit
Do not attempt installation on your own as you hazardous materials and must be disposed of according to could void the Precor Limited Warranty. For more information, Hazardous Waste Regulations. Refer to Radio Frequency refer to Obtaining Service. -
Page 15: Club Features
• Enable or disable hidden programs or remote access (treadmill) • The club programming mode is accessed by pressing the RESET • Change the auto-level setting (EFX) key at the Precor banner. The remaining key presses must occur • Set the resistance range (cycle) quickly and without pause. - Page 16 Settings range from High, Medium, and Low. Refer to Cycle: Setting a Resistance Range. ✱ This feature is available in all Precor club units. Note: When you make changes in club programming mode, the new settings replace the factory defaults.
-
Page 17: Accessing Club Programming Mode And Changing The Settings
1. At the Precor banner, press the following keys in sequence denied. For more information, refer to Entering the Safety Code. without pausing between selections: 2. -
Page 18: Choosing A Language
Choosing a Language Selecting a U.S. Standard or Metric Display The equipment can display user prompts, text, and user entries in seven different languages. When the equipment is shipped from the The equipment can display measurements in either Metric or U.S. factory, it is set to display English. -
Page 19: Setting An Exercise Session Time Limit
1 and 20 minutes. minutes). For example, if you set the pause time limit to 60 seconds, the display automatically resets to the Precor banner if no key press Note: The automatic cool-down period is appended to the end of any occurs within one minute. -
Page 20: Setting A Cool-Down Time Limit
Setting a Cool-Down Time Limit Treadmill: Determining the Club Speed Limit You can limit how long a user cools down after exercising on the equipment by entering a time between 0 and 5 minutes. You can set a maximum speed for the treadmill. This limits how fast the running belt moves and, consequently, the number of speed settings Important: It is highly recommended that you set the cool-down that are available to the user. -
Page 21: Treadmill: Setting An Incline Limit
Treadmill: Setting an Incline Limit Treadmill: Accessing Performance Programs You can set the maximum grade (percent of incline) for the treadmill. This limits the degree of incline and, consequently, the number of The performance-based Gerkin Fitness Test on the treadmill can be incline settings that are available to the user. -
Page 22: Treadmill: Changing Remote Control Access
RESET to return to the When you enable this program, you can set a user’s speed and incline Precor banner. through a computer software program which interfaces with the Note: This setting is only available on EFX units with adjustable CSAFE port on the treadmill. -
Page 23: Cycle: Setting A Resistance Range
Cycle: Setting a Resistance Range Table 4. Resistance range settings on cycles Setting Description You can set a low, medium or high range of resistance on the HI or HIGH Provides the full range of resistance available. If an upright recumbent or upright cycles. -
Page 24: Informational Displays
5. To move to the next display (software versions), press CLEAR and Viewing the Odometer then press the down arrow key on the navigational bar. 1. At the Precor banner, press the following keys in sequence and without pause: RESET, 6, 5 DIAGS - INFORMATION DISPLAY appears briefly and is replaced by ODOMETER, which scrolls continuously. - Page 25 U-BASE SW, press CLEAR and then, press the down arrow key Warranty Registration card. You can also register online at followed by OK. www.precor.com. Note: If a part number does not exist, 00000-000 appears. 13. To move to the next display (usage log), press CLEAR and then 8.
-
Page 26: Troubleshooting Error Codes
18. To view the each entry in the error log, press the down arrow key on the navigational bar. Each error code specifies when it occurred 22. When you are ready, press RESET to return to the Precor banner. listing the odometer, unit, and hour meter. Current (amp) values may also be displayed. -
Page 27: User Id Entry With Csafe Equipment
User ID Entry with CSAFE Equipment A message appears on the display and indicates when the user ID is accepted by the CSAFE master device. Once program selection is The equipment is fully compatible with CSAFE protocols. When the complete, the user can begin exercising. equipment is connected to a CSAFE master device, the user is To review information about CSAFE specifications, visit the web site prompted to press ENTER and begin an identification process. -
Page 28: Maintenance
Place an OUT OF SERVICE sign on it and make sure all patrons and users know that they must not use the equipment. To order parts or to contact a Precor authorized service provider in your area, refer to Obtaining Service. Product Owner’s Manual: Maintenance... -
Page 29: Efx: Cleaning The Ramp
Realigning the belt takes a few simple adjustments. Note: If your equipment has a ramp cover, remove it before performing If you are unsure about this procedure, call Precor Customer Support. the following steps. Refer to the EFX Assembly Guide. -
Page 30: Treadmill: Adjusting The Running Belt
Important: Do not turn the adjusting bolt more than ¼ turn at a If you are unsure about adjusting the running belt, call Precor time. Overtightening the bolt can damage the treadmill. -
Page 31: Upright Cycle: Adjusting The Seat Tilt
Upright Cycle: Adjusting the Seat Tilt 2. Adjust the seat tilt (forward or backward) as shown in Diagram 6. 3. Wrench tighten the nut To adjust the seat tilt on an upright cycle, take the following steps. 4. Apply pressure to the seat and make sure that it does not move. 1. -
Page 32: Recumbent Cycle: Realigning The Seat
Recumbent Cycle: Realigning the Seat If the seat rocks side-to-side, you need to realign the center wheel underneath the seat. Adjustment screws are located on the left side of the seat rail. To remove seat wobble (side to side movement), take the following steps. -
Page 33: Moving The Equipment
Moving the Equipment Long-Term Storage It is important, if you plan to move the equipment, that you obtain adult When the equipment is not in use for any length of time, make sure it help and use proper lifting techniques. The equipment is very heavy. is turned Off (treadmill only) and the power cord or optional power Take advantage of the roller wheels on the equipment when moving it adapter (self-powered equipment) is unplugged from its power source... -
Page 34: Precor Commercial Equipment Limited Warranty
Conditions and Restrictions. period only. To claim under this warranty, the buyer must notify Precor or your authorized Precor dealer within 30 days after the date of discovery of any... - Page 35 LIABILITY, WHETHER ARISING IN CONTRACT (INCLUDING WARRANTY), 3. Repairs performed on Precor equipment missing a serial number or with a serial TORT (INCLUDING ACTIVE, PASSIVE, OR IMPUTED NEGLIGENCE AND tag that has been altered or defaced.
- Page 36 Notes: Product Owner’s Manual...
- Page 37 Thank You and Welcome to Precor We are confident that you will be pleased with your purchase and that your new Precor equipment will help satisfy your customers’ fitness needs, while helping you meet your business goals. To allow us to serve you better, please take a few moments to complete and return your warranty registration.
- Page 38 What other brands of cardio equipment do you currently offer (check all that apply): ❑ Life Fitness ❑ True ❑ Cybex ❑ StarTrac ❑ Other ______________________________ What other Precor equipment do you currently offer (check all that apply): ❑ EFX ❑ Cycle ❑ StretchTrainer ❑ Treadmill ❑ Stair Climber ❑...
- Page 40 Any party contemplating the use of Precor’s product designs is hereby forewarned that Precor considers the Registration Card# 45622-101, en unauthorized appropriation of its proprietary rights to be a very serious matter. Precor will vigorously pursue all Woodinville, WA USA 98072-4002 unauthorized appropriation of its proprietary rights.