A Closer Look At Your Hmi - EASTERN INSTRUMENTS CENTRIFEEDER ELECTRONICS Manual

The main components of your HMI Touch Screen will be the Touch Screen itself, the LED Dis‐
play, the Menu Soft‐Key, and Soft‐Keys 1 thru 4. By pressing the Menu Soft‐Key, you will be
returned to the Main Menu, or TOP page. The LED Display will give you information on your
process, the status of your Compact Flash Card and on the status of any alarms that have been
activated. Below is a detailed description of the LED Display.
LED
RED (TOP)
YELLOW (MIDDLE)
GREEN (BOTTOM)
SOFT KEYS 1‐4
MENU SOFT KEY
416 Landmark Drive 416 Landmark Drive
Wilmington, NC 28412 Wilmington, NC 28412
A Closer Look at Your HMI
LED DISPLAY CHART
ACTIVITY
FLASHING Unit is in the boot loader, no valid configuration is loaded
STEADY Unit is powered and running an application
OFF No Compact Flash is present
STEADY Valid Compact Flash card is present
FLASHING RAPIDLY Compact Flash card is being checked
Unit is writing to the Compact Flash, either because it is
FLICKERING
storing data, or because the PC connected via the USB port
has locked the drive
FLASHING SLOWLY Incorrectly formatted Compact Flash card is present
FLASHING A tag is in an alarm state
STEADY Valid configuration is loaded and there is no alarm present
www.easterninstruments.com www.easterninstruments.com
INDICATION
9
TOUCH SCREEN
LED DISPLAY
Phone:(910) 392‐2490
Phone:(910) 392‐2490
Fax: (910) 392‐2123
Fax: (910) 392‐2123