EASTERN INSTRUMENTS CENTRIFEEDER ELECTRONICS Manual page 22

NOTE: These parameters are typically set up at factory and should not need adjustment.
Your Advanced Control Settings can all be accessed via the TOP.ADV Page by pressing the Ad‐
vanced Control Button on the Main Menu.
Press the Feeder Type Button on the TOP.ADV Page. There are several options for your feed
device, but for the CentriFeeder with a Vibratory Conveyor provided by Eastern Instruments,
press the Peripheral Vibratory‐Internal Button and press OK.
Press the Control Modifications Button to access the ADV.CONTROL Page. You should now see
the page below.
Setting the Auto Delay: Sets the duration of time that the unit stays in Manual Mode before
switching to Automatic Mode when first started up. See the Setting the Auto Delay section of
the CentriFeeder Manual
416 Landmark Drive
Wilmington, NC 28412
ADVANCED CONTROL SET
ADVANCED CONTROL SET
Selecting Your Feeder Type
Control Modifications
www.easterninstruments.com
TINGS
TINGS
22
Phone:(910) 392‐2490
Fax: (910) 392‐2123