After correctly entering your username and password, you will be logged on to the system.
Please note that the HMI security system is configured to time out after 10 minutes of inactiv‐
ity, at which time you will be required to login again. You will also be required to login any
time the HMI unit is powered up.
Changing Your Password
The password‐based security system of your HMI was designed to have a similar look and feel
to computer‐based security systems commonly encountered on a PC. It is recommended to
change your password for security purposes, upon entering your system, however it is impor‐
tant to remember your password and to write it down and store it in a secure place, as once
the password has been changed, the new password is required to operate the CentriFlow®
HMI.
From the Top Menu Page, Click the
"Preferences" button. You will now be on the
TOP.PRF (Preferences) page (seen on right). Click
on the "Security Settings" button to go to the
PRF.PASSWORD.SETUP page. Click "SET PASS" to
change the Admin password. The "ENTER NEW
PASSWORD" dialog box (shown below) will ap‐
pear. You may now type in the new password.
Again, you may click the "Symbol" button to use
numeric characters. You will then be prompted
to repeat the new password. The password
should now be successfully changed.
416 Landmark Drive
Wilmington, NC 28412
www.easterninstruments.com
46
Phone:(910) 392‐2490
Fax: (910) 392‐2123