Error Code And Parameter; List 1: Error Code; List 2: Parameter - Siruba DL7300 Manual

●Error code and parameter
Error
Meaning
code
The error of needle
Er01
position
Can't test the motor
Er02
signal
The hall or phase of
Er03
motor is wrong.
The protection of
Er04
locked-rotor
The hardware is
Er05
over-current.
The serial communic
Er07
ation is wrong.
No. Name
The locked highest
P-01
speed
The setting of
P-02
motor positive and
negative rotate
The angle of down
P-03
stop
P-04
The starting speed
Accelerate the
P-05
speed

List 1: Error code

①
The motor hall is broken
③
off The connecting of 9 needle signal line is not good
①
The connecting of 9 needle signal line is not good
②
The connecting of motor switch is not good.
①
The connecting of 9 ne
②
The motor hall is broken.
①
The motor is overloading.
power line is not good.
①
The motor is overloading.
signal line is not good.
①
The line connecting of control box is no good.

List 2: Parameter

Leave-f
Parameter
actory
range
number
200~6500 4500
0~1 1
6~18 12
200~800 250
2000~4000 3500
29
Possible problem
②
The hand -wheel magnet fall
edle signal line is not good
②
The connecting of motor
②
The connecting of m
Function
0 means negative rotate, 1 means
positive rotate, the
positive notate.
12 degree
250rpm
3500rpm
otor
original is