Siruba DL7300 Manual page 41

The auto foot lifter
［
up/do within when
stop in the sewing
Parameter
＠
increment
setting
Number
囝
decreasing
setting
Enter into the
囯
para eterar叫
皿
Parame-ter increment
®
Then皿沄of
汕om洫reco101· I ©
Thc珥ingbuItooofOOt1crnlinc
Show the
®
toggle k e y
Increasing
button
e)
Decreasing
button
The foot lifter move or not when sewing stop.
When the diagram shows in the LCD control box, the presser foot wil廿血up automatically when sewing stop�d
When the diagram doesn't show in the LCD control box, the presser foot won't move when sewing stop.
Setting the No. of needles in A, B, C, D areas increment. The number can be set from Oto 9.
Setting the No. of needles in E, F, G, H areas increment. The number can be set from Oto 99.
The number increment key should be set in the parameter area
Setting the No. of needles in A, B, C, D areas decreasing, the number can be set from Oto 9.
Setting the No. of needles in E, F, G, H areas decreasing. The number can be set from Oto 99.
The number decreasing key should be set in the parameter area.
Press the key for two seconds can enter into pru·ameter area.
The key can be considered as the button of parameter increment
Press once shortly and recover the current number of bottom line to the setting number
Then press for 3 seconds and enter to the setting number of the bottom line.
The bottom line can be switched to be transferred digit number.
When pressing the 1ncreasmg button, the setting data wt!l 1ncrease 1n the settmg range
When pressing decreasing button, the setting data decrease in the setting range.
14